• Title/Summary/Keyword: 3축 제어

Search Result 368, Processing Time 0.028 seconds

ATTITUDE CONTROL OF SMALL SCIENTIFIC SATELLITE USING GEOMAGNETISM (지구자기장을 이용한 소형과학위성의 자세조정)

  • 배성구;석재호;최규홍
    • Journal of Astronomy and Space Sciences
    • /
    • v.8 no.1
    • /
    • pp.85-98
    • /
    • 1991
  • Geomagnetism was used to control the attitude of the small scientific satellite at low altitude in sun-synchronous orbit. First, we analyzed the telemetry data. The rotation state of the satellite, can be known from the magnitude and variations of the magnetic field which is measured from the 3 axis magnetometer. In axisymmetric case, it is possible to control the attitude of the satellite by changing the rotation velocity of each 3 axis. The algorithm and the program were developed to calculate the supply time of the current operating the magnetorquer. This attitude control can be applied when the satellite is in tumbling motion and after passive control is attained by the Gravity gradient boom.

  • PDF

Failure analysis of a turbo molecular pump in semiconductor equipments (반도체 장비에서 터보 분자 펌프의 파손 사례 연구)

  • Jeong, Jin-Yong;Ju, Jeong-Hun;O, Sam-Gyun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.120-120
    • /
    • 2018
  • 반도체 소자나 디스플레이 패널 제조 공정에 가장 많이 사용되는 진공 펌프인 터보 분자 펌프는 오일을 사용하지 않고, 설치 방향이 자유로우며 넓은 작동 압력 영역을 가지고 있어서 고가임에도 불구하고 점점 더 사용 영역을 넓혀 가고 있다. 상하의 두 곳에 회전축을 지지하는 베어링이 필요한데, 기계식 금속 베어링을 채용하는 경우에는 반드시 윤활유를 공급해 주어야 하고, 고온, 부식성 또는 산화성 가스의 배기 시에는 퍼지 가스로 비활성인 질소나 알곤등을 이용하여 보호를 해주어야 한다. 반면, 자기 베어링을 채택한 모델은 윤활의 걱정에서 자유로울 수 있기 때문에 채용이 늘어나고 있다. 동일극의 반발력이나 반대극의 인상력을 이용한 구조를 갖게 되는데 갑작스러운 입구 쪽 압력의 증가 시에는 자석 끼리 부딪치는 일이 발생하고 이로 인해서 로터 모듈 전체에 큰 손상을 갖게 되므로 한 곳 정도에 비상용 터치 다운 베어링을 기계식으로 윤활제 없이 설치하기도 한다. 기본적으로 자기 베어링 방식은 로터 모듈의 부상과 제어를 위해서 3축 또는 5축 제어를 하게 되는데 여기에는 전자석의 전류를 미세하게 조정하여 피드백 하는 시스템을 활용하기 때문에 외부에서의 자기장이 일정값 이상 침투하게 되면 제어 회로의 기능에 문제를 일으키게 된다. 또한 축 방향에 수직인 자기장의 강도가 높아지면 고속으로 회전하는 금속 블레이드가 자속을 자르게 되므로 표면에 와전류가 발생하여 문제가 된다. 터보 분자 펌프는 회전자와 고정자 간격이 1 mm 이내로 작아서 약간의 진동이라도 발생하면 회전자와 고정자 간에 충돌이 일어나고 이는 곧 파손으로 이어진다. 그림 1에는 파손 원인 분석을 위한 회전자 모듈의 수치 해석용 모델의 일부를 나타내었고, 그림 2에는 실제로 외부 자기장에 의한 파손이 발생한 사례의 자기 베어링 모듈의 사진을 나타내었다. 본 발표에서는 외부 자기장의 형태에 따라 제어 자기장에 미치는 영향을 CFD-ACE+(ESI corp)를 활용하여 해석하였다.

  • PDF

A Study of the One-Stage Axial Turbine Performance with Various Axial Gap Distances between the Stator and Rotor (정.동익 축방향 간격에 따른 단단 축류터빈의 성능시험에 관한 연구)

  • Kim, Dong-Sik;Cho, Soo-Yong
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.4
    • /
    • pp.99-105
    • /
    • 2002
  • The performance test of an axial-type turbine is carried out with various axial gap distances between the stator and rotor. The turbine is operated at the low pressure and speed, and the degree of reaction is 0.373 at the mean radius. The axial-type turbine consists of ons-stage and 3-dimensional blades. The chord length of rotor is 28.2mm and mean diameter of turbine is 257.56mm. The power of turbo-blower for input power is 30kW and mass flow rate is $340m^3$/min at 290mmAq static-pressure. The RPM and output power are controlled by a dynamometer connected directly to the turbine shaft. The axial gap distances are changed from a quarter to three times of stator axial chord length, and performance curves are obtained with 9 different axial gaps. The efficiency varies about 8% of its peak value due to the variation of axial gap on the same non-dimensional mass flow rate and RPM, and experimental results show that the optimum axial gap is 1.6-1.9Cx.

6축다관절 로봇 동력분산학습제어

  • 이수철
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.3 no.1
    • /
    • pp.183-191
    • /
    • 1998
  • 다양한 산업분야의 생산공장에서 주로 활용되고 있는 6축 수직다관절로보트는 대부분 단순반복운동을 하고 있다. 단순반복중 point-to-point제어보다 품질을 요하는 tracking-to-trajectory 제어를 위한 분산학습제어에 대하여 연구하고자 한다. 관련 학습제어기법으로는 선형누적형기법과 간접적응기법이 있다. 두기법의 차이는 시스템 정보의 유무이며, 시스템의 주어진 상황에 따라 두 기법중 하나를 선택할 수 있다. 간접적응형 기법은 zero tracking error를 보장받기 위해서 보다 많은 반복을 요하는 경비를 부담하여야 한다.

Design of a 6-Axis Inertial Sensor IC for Accurate Location and Position Recognition of M2M/IoT Devices (M2M / IoT 디바이스의 정밀 위치와 자세 인식을 위한 6축 관성 센서 IC 설계)

  • Kim, Chang Hyun;Chung, Jong-Moon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39C no.1
    • /
    • pp.82-89
    • /
    • 2014
  • Recently, inertial sensors are popularly used for the location and position recognition of small devices for M2M/IoT. In this paper, we designed low power, low noise, small sized 6-axis inertial sensor IC for mobile applications, which uses a 3-axis piezo-electric gyroscope sensor and a 3-axis piezo-resistive accelerometer sensor. Proposed IC is composed of 3-axis gyroscope readout circuit, two gyroscope sensor driving circuits, 3-axis accelerometer readout circuit, 16bit sigma-delta ADC, digital filter and control circuit and memory. TSMC $0.18{\mu}m$ mixed signal CMOS process was used. Proposed IC reduces 27% of the current consumption of LSM330.

Control of humanoid using three axis acceleration sensor (3축 가속도 센서를 이용한 이족보행 제어)

  • Park, Seong-Hun;Park, Ki-Hun;Park, Seung-Kyu;Yoon, Tae-Sung
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.1675-1676
    • /
    • 2008
  • 인간 동보행의 원리를 3축가속도 센서를 이용 소형 휴머노이드의 보행원리를 적용시키는 것을 목적으로 건강한 일반인 20명을 대상으로 3축가속도를 사람의 신발 앞꿈치에 장착하여 각 축에 따른 가속도를 측정하였다. 이에 앞서 사람들의 다리길이(골반부터 발목), 개인의 평균 보폭등을 측정하여 각각을 평균화하는 과정을 거치고 이 평균화된 데이터를 기준으로 제작된 소형 휴머노이드의 다리길이에 따른 보폭 및 보행원리를 적용함으로서 소형 휴머노이드의 보행을 간단한 비을 적용하여 제어할 수 있도록 하였다.

  • PDF

Position control of robot's rotational axis having parallel link mechanism (평형링크 메카니즘이 있는 관절형 로보트 회전축의 위치제어)

  • 여인택;이연정
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 1986.10a
    • /
    • pp.341-345
    • /
    • 1986
  • In the course of robot control system building, there are problems in the position control loop of 3rd axis of robot manipulator. The problems are summerized as two: one is uncontrollability of position and the other is oscillation. And these problems are analyzed through experiment, and it is known that the cause of problems in torsional vibration of 3rd axis. So that these two problems are solved by noise immunity enhancement and lowering of PI controller gain.

  • PDF

속도 검출기 없는 유도전동기의 고성능 all-digital drive system의 구현

  • 유호선;이상훈
    • ICROS
    • /
    • v.3 no.3
    • /
    • pp.36-48
    • /
    • 1997
  • 본 원고에서는 극 좌표계를 기준으로 하여 추정기를 구성함으로써 속도 검출기가 없는 유도전동기의 회전자 자속 및 회전 속도를 정확히 추정해 내고, 다시 이 정보를 이용하여 유도전동기를 고성능으로 제어할 수 있는 드라이브 시스템의 구현 과정과 이를 이용한 간단한 실험 결과에 대하여 소개하였다. 본 원고에서 제시한 몇가지의 실험 결과들은 소프트웨어의 알고리즘에 의하여 전동기의 회전축에 부착된 속도 검출기는 충분히 대치될 수 있음을 말해주는 것이므로, 속도 검출기가 가격과 내구성 등에서 실제적으로 산업 현장에 적용하기에 많은 문제점을 안고 있다는 점을 감안할 때 그 유용성을 입증하는 것이다.

  • PDF

Development of the Fishbot Using Haptic Technology (햅틱기술을 이용한 피시봇 개발)

  • Lee, Young-Dae;Kang, Jeong-Jin;Moon, Chan-Woo
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.10 no.4
    • /
    • pp.77-82
    • /
    • 2010
  • In this paper, a haptic fishing robot, Fishbot, for a Virtual Fishing System is presented. Fishbot is 3DOF robot and it consists of a XY table and a wheel motor. To simulate the motion of fish, XY table is controlled by position servo drivers with variable torque constraint, and wheel axis is controlled by torque servo driver. Finally, Fishibot detects the end point of fishing pole with cameras to recognize the pose of user, and it can interface with a Virtual Reality System.