• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.75-81
• /
• 2001

In this paper we analyzed the localization error of near-field detection algorithm in the sea. The near-field detection algorithms using triangulation and wavefront curvature basically assume a signal in two dimension of bearing and range. But the assumption causes localization error because there is three dimension of bearing, range, and depth in the sea. Even through three dimensional effect is considered, the localization error is occurred if multipath propagation in the sea is ignored. To analyze the localization error in the sea, we simulate the near-field localization using acoustic propagation model and focused beamforming considering wavefront curvature. The simulation results indicate that localization error always occurs in the sea and the error varied with sound velocity profile, water depth, bottom slope, source range, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.3
• /
• pp.684-694
• /
• 2009

This study is aimed at looking into the PR method of cadastral re-survey, and at looking for the reason of the delay of cadastral re-survey project. We thought that the reason why the cadastral re-survey project was delayed was a lack of a national agreement on it owing to an insufficient PR. So, to solve this question, we proposed an alternative plan for the PR method of cadastral re-survey, using Hutton's PR model. As a result of a study, a total of 31 PR methods was made which were apt for every practical PR on the basis of 6 three-dimensional models of PR practice. But, some of Hutton's PR models proved to be unfit for the cadastral re-survey project. Therefore, we formed and proposed a new model to apt for the cadastral re-survey project. The result of this study is expected to be of help in getting a foundation to form a national agreement on the quick operation of a upcoming cadastral re-survey project.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.218-223
• /
• 2000

영상에서 색상은 조명과 물체의 반사 특성에 의해 걸정되므로고 정확한 조명성분 추출을 통해 물체 고유의 색상을 복원할 수 있다. 물체 색상과 하이라이트 색상의 분포와 이들간의 관계를 잘 반영하여 모델링한 Dichromatic 반사 모델에서는, 3차원 RGB 공간에서의 하이라이트(highlight) 영역에 의한 클러스터 분포형상으로부터 표면반사벡터를 구해 이것을 조명벡터로 결정하였다. 그러나, 표면반사벡터의 방향은 물체색상의 영향을 받아 실제 조명벡터와 동일한 방향을 나타내지 못한다는 것을 실험을 통해 알 수 있었다. 실제적으로 하이라이트영역에 대한 클러스터는 물체 색상으로부터 조명색상에 근접한 방향으로 형성되며, 조명벡터로는 글러스터의 최대값으로 향하는 것을 취하는 것이 보다 정확하다는 특성이 있음을 확인하였다. 본 논문에서는 여러 가지 실험을 통해 이러한 특성이 타당함을 제시하고, 그래픽반사모델을 이용하여 하이라이트 색상에 대한 새로운 해석 방법을 제시한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.335-349
• /
• 2017

Submerged breakwaters installed under the water surface are a representative coastal structure to prevent coastal erosion, and various types of submerged breakwaters have been proposed and discussed so far. Generally, submerged breakwaters make the complex wave fields due to abrupt change in water depth at the crown of the breakwater. In this study, wave heights and mean water level formed around a breakwater are examined numerically for three-dimensional permeable submerged breakwaters. OLAFOAM, CFD open source code, is applied in the numerical analysis, and the comparisons are made with available experimental results on the permeable upright wall and the impermeable submerged breakwater to verify its applicability to the three-dimensional numerical analysis. Based on the applicability of OLAFOAM numerical code, the wave height and mean water level distribution formed around the permeable submerged breakwaters are investigated under the formation condition of salient. The numerical results show that as the gap width between breakwaters decreases, the wave height in the center of the gap increases, while it decreases behind the gap, and the installing position of the breakwater from the shoreline has little influence on the change of the wave height. Furthermore, it is found that the decrease of the mean water level near the gap between breakwaters increases with decreasing of the gap width.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.614-623
• /
• 1994

Synthesizing speech and facial images is necessary for human interface that man and machine converse naturally as human do. The target of this paper is synthesizing the facial images. In synthesis of the facial images a three-dimensional (3-D) shape model of the face is used for realizating the facial expression variations and the lip shape variations. The various facial expressions and lip shapes harmonized with the syllables are synthesized by deforming the three-dimensional model on the basis of the facial muscular actions. Combications with the consonants and the vowels make 14.364 syllables. The vowels dominate most lip shapes but the consonants do a part of them. For determining the lip shapes, this paper investigates all the syllables and classifies the lip shapes pattern according to the vowels and the consonants. As the results, the lip shapes are classified into 8 patterns for the vowels and 2patterns for the consonants. In advance, the paper determines the synthesis rules for the classified lip shape patterns. This method permits us to obtain the natural facial image with the various facial expressions and lip shape patterns.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.135-142
• /
• 2001

This study discusses frequency analysis based on the frequency spectrum and process characterization in orthogonal cutting of Fiber-matrix composite materials. A sparsely distributed idealized composite material, namely a glass reinforced polyester(GFRP) was used as workpiece The present method employs a force sensor and the signals from the sensor are processed using the fast Fourier transform(FFT) technique. The experimental correlations between the different chip formation mechanisms and power spectrum me established. Effects of fiber orientation, cutting parameters and tool geometry on the cutting mechanisms me also discussed.

• Archives of design research
• /
• no.18
• /
• pp.25-34
• /
• 1996

Industrial design development methods and processes have changed in accordance with Industrial Information Age. These days, problems are created by existing methods and evaluation of design value , all problems concerned with time and finances sitaution have been made a subject of discussion. Development of design processes have been changed by the development of problem recognition and solving tools, and dpsign tpchnulugy havp hppn replaced by computer technology,Thus. software design processes linking thoughtware to hardware are used in the solution of design problems with many parts. In this study, 3D Modeling samples are presented, 3D Modeling can realise ' Ideas' to '3Dimentional Virtual Ohjects'. These effect and value are anle to decisively influence the process of design problem conference-ebealuation-solution.Proxesses of actual modeling and rendering are made as follows. By compusition of simple 20 drawings and shaping them into 30 objects, 30 solid models can be made. To prssent effectivley, we can make a sample model by varying camera views,light sourses,materials and colours etc. This sample is evaluated by various cumposition, methods and PERT(Program Evaluation and Review Technique). This cuncrete sample (tentative plan)is changed within the CAD SYSTEM by design evaluation, and then converted to flowchart of mass productive conception through refined data. So, that tentative plan can be conformed to design desire actuillly, to the utmost degree. Finally, this design process can be proposed as il new method in cuntrast with current methods. The aim of this study is to suggest effective evaluation methods of design outcome among many evaluating elements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.212-216
• /
• 2017

Aerodynamic analysis for the airfoil, KARI-11-180 having 18% thickness ratio, was performed with CFD techniques. The boundary layer grid was generated by projecting the wall grid normally and fine grid was placed behind the trailing edge to capture the wake accurately. The distance to the far boundary is 100 chords and the flow condition is same as the wind tunnel test condition. Transition SST and DES turbulence models were utilized for accurate prediction of the transiton point. The predicted lift is higher but the drag is predicted lower than the wind tunnel test. 3-dimensional results with airfoil models of which aspect ratio were 2 and 5 were compared with 2-dimensional results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.386-386
• /
• 2017

지하수 해석을 위해 3차원 수치해석 모형이 적용되고 있으나, 다양한 매개변수를 명확히 적용하기에는 한계가 있다. 특히, 수리전도도는 지층의 투수성정도를 나타내는 계수로 지하수 분석에 매우 중요한 매개변수이다. 신뢰성의 확보를 위해 양수시험을 통해 산출된 결과를 이용하고 있으나 소수관정의 시험결과를 유역의 대푯값으로 적용하기에 불확실도가 매우 높고, 수위변화가 독특한 지역의 정확한 수리특성을 적용하기에 한계가 있다. 이 연구에서는 수리전도도 특성을 해석하기 위하여 3차원 수치해석모형을 적용하였으며, 모델보정 방법 중 Regularization(정규화)라고 불리는 Pilot point 기법을 사용하였다. 제주도와 같이 수리전도도 값이 지역별로 차이가 크고 동일 유역 내에도 다른 지질구조를 보이는 등 동일 매질에서 동일 투수성을 보이지 않는 다양함으로 실측값들을 적용하기에 어려운 곳에서 정규화라는 보정방법은 최적화된 방법이다. 지하수위는 중제주유역 내 위치한 12개소 수위관측정의 2016년 연평균수위를 적용하였다. 미계측지역은 제주도 등수위선자료를 이용하여 DEM을 구축하였으며, 임의지점 17개소를 선정하여 대표수위로 적용하였다. 중제주유역의 평균 수리전도도는 82.90 m/day로 분석되었으며, 유역의 동측 하류부는 최대 1,745 m/day로 비교적 큰 결과가 산출되었다. 유역의 중앙에 위치하는 OR관측정을 기준으로 동 서지역의 지하수위를 검토한 결과 서측은 지형구배에 따라 지하수위가 형성하고 있으나, 동측의 경우 상 하류의 표고차가 30m이상 발생되지만 지하수위는 유사한 형태를 보이고 있다. 지하수 흐름에 해석되는 Darcy의 방정식은 수리전도도와 동수경사는 반비례관계를 나타내며, 이 이론에 의해 상 하류 지하수위가 유사하게 형성되는 동측지역은 국부적으로 수리전도도가 높게 형성되는 것으로 확인되었다. 실무에서는 유역경계에 따라 평균화된 매개변수가 적용되므로 명확한 지하수 해석이 어렵고, 수리전도도와 같이 지역적 편차가 심한 매개변수는 다양한 연구를 통해 적용성검토가 수행되어야 한다.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.427-436
• /
• 2006

The objective of this study was to investigate the effects of various occlusal loads on the stress distribution of the buccal cervical region of a normal maxillary second premolar, using a three dimensional fnite element analysis (3D FEA). After 3D FE modeling of maxillary second premolar, a static load of 500N of three load cases was applied. Stress analysis was performed using ANSYS (Swanson Analysis Systems, Inc., Houston, USA). The maximum principal stresses and minimum principal stresses were sampled at thirteen nodal points in the buccal cervical enamel for each four horizontal planes, 1.0 mm above CEJ, 0.5 mm above CEJ, CEJ, 0.5 mm under CEJ. The results were as follows 1. The peak stress was seen at the cervical enamel surface of the mesiobuccal line angle area, asymmetrically. 2. The values of compressive stresses were within the range of the failure stress of enamel. But the values of tensile stresses exceeded the range of the failure stress of enamel. 3. The tensile stresses from the perpendicular load at the buccal incline of palatal cusp may be shown to be the primary etiological factors of the NCCLs.