• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.65-74
• /
• 2006

This study was attempted to Kinematical characteristics of the Endo $360^{\circ}$El-grip Swing on the horizontal bar. To do this, we selected and analyzed the performance of two athletes who did Endo $360^{\circ}$El-grip Swing in the horizontal bar competition of male artistic gymnastic in the 22nd Universiad Games 2003 Daegu. We drew the conclusions from the kinematical factors that were came out through analyzing three-dimensional cinematography of the athletes' movements, by using two video cameras. In point of analyzing the actual competition situation, it is expected that gymnastics and coaches have the effective informations, and the following conclusion had resulted. 1. When performing Endo $360^{\circ}$El-Grip, the average for entire required time was $1.93{\pm}0.06sec$. The average for descent phase time was $0.24{\pm}0.02sec$, ascent phase time was 0.22${\pm}0.07sec$, connecting phase time was $0.87{\pm}0.07sec$, and El-Grip phase time was $0.61{\pm}0.02sec$. The descent phase need short period of time but however to have a stable performance, ensuring ascent and connecting phase time are needed. El-Grip phase need short period of time to have a stable re-grasp. 2. To have a convenient preparation for El-Grip in descent and ascent phase, lowering CM, and ease up in sway and plunge from the High Bar would make descent and ascent even more faster and would have increase effect in trunk rotation. 3. In descent and ascent phase, if shoulder angle and arm slope is dwindling then it would effect rotation angle so might risk it from hitting a Bar when putting legs in and out. 4. In connecting phase, it requires some time to show stable performance when El-Grip phase is continued by using hip angle which would make trunk rotation angle bigger and make descent and ascent time slower. 5. In El-Grip phase, when doing motions like hand standing. using hip angle more than maximum would make CM even faster and it is stable position while performing.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.171-176
• /
• 2012

As langasite $A_3BC_3D_2O_{14}$ compounds with piezoelectric properties exhibit no phase transition up to the melting point of 1,400-$1,500^{\circ}C$, many high temperature applications are expected for the SAW filter, temperature sensor, pressure sensor, and so on, based on the digital transformation of wider bandwidth and higher-bit rates. It has a larger electromechanical coupling factor compared to quartz and also nearly the same temperature stability as quartz. The $La_3Ga_5SiO_{14}$ (LGS) crystal with the $Ca_3Ga_2Ge_4O_{14}$-type crystal structure was synthesized and the crystal structure was analyzed by Mill et al. It is also an important feature that the growth of the single crystal is easy. In the case of three-element compounds such as $[R_3]_A[Ga]_B[Ga_3]_C[GaSi]_DO_{14}$ (R=La, Pr and Nd), the piezoelectric constant increases with the ionic radius of R. In this study, crystal structures of four-element compounds such as $[A_3]_A[B]_B[Ga_3]_C[Si_2]_DO_{14}$ (A = Ca or Sr, B = Ta or Nb) are analyzed by a single crystal X-ray diffraction, and the mechanism and properties of the piezoelectricity depending on the species of cation was clarified based on the crystal structure.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.157-164
• /
• 2008

GPS baseline analysis is a mathematical procedure which estimates a baseline vector from carrier-phase double-differenced observations. Least squares technique is generally applied for the processing and integer ambiguities in the observations should be resolved to obtain maximum accuracy of the solution. In GPS control surveying, after assembling the baseline solutions into a network, adjustment is performed to derive final coordinate sets of unknown points. This paper deals with details of GPS baseline analysis for the $2^{nd}$ order national geodetic network adjustment. After reviewing GPS campaigns carried out by National Geographic Information Institute (NGII) and their observations. technical issues and considerations for the GPS baseline analysis are presented with emphasis of selecting the processing strategies and software. Finally, the analyzed results will be evaluated by examining the close of figures formed by joining the processed baseline vectors.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.143-157
• /
• 2002

This study was to analyze the kinematic variables when the subjects performing Uchi-mata(inner thigh reaping throw) by Kumi-kata types((How to grasp A or B?) and two different opponent's height in Judo. Kinematic variables were temporal, posture. Data analysis was collective comparison of two-way ANOVA, t-test by type A&B and two different opponent's height. There were significant difference of Kumi-kata types(p<.05) in the time elapsed on Kake phase(KP : throwing phase) and hip, knee, ankle-angle of the attacking foot in the 1st stage of KP and knee, ankle-angle of the attacking foot and hip, knee ankle-angle of the supporting foot in the 2nd stage of KP. There were significant difference of two opponent's(p<.05) in the time elapsed on KP and hip-angle of the supporting foot in 1st stage of KP. Therefore, the interaction effect(p<.05) were in the time elapsed on KP and hip-angle of the supporting foot in the 2nd stage of KP. So, It could be suggested that Judoka hold on the part-behind neck lapel(type A) at the sleeve with the other of Judogi jacked when opponent's height was short. Because the time elapsed on KP of type B was not so fast as type A(p<.05) during performed Uchi-mata, and also the bigger hip-angle of the supporting foot in the 2nd stage of KP grew, the faster the time elapsed on KP became.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.5.2-5.2
• /
• 2009

From 10 years ago, the development of nano-devices endeavored to achieve reconstruction of information technology (IT) and nano technology (NT) industry. Among the many materials for the IT and NT industry, zinc oxide (ZnO) is a very promising candidate material for the research of nano-device development. Nano-structures of ZnO-based materials were grown easily via various methods and it attracts huge attention because of their superior electrical and optical properties for optoelectronic devices. Recently, among the various growth methods, MOCVD has attracted considerable attention because it is suitable process with benefits such as large area growth, vertical alignment, and accurate doping for nano-device fabrication. However, ZnO based nanowires grown by MOCVD process were had the principal problems of 1st interfacial layers between substrate and nanowire, 2nd a broad diameter (about 100 nm), and 3rd high density, and 4th critical evaporation temperature of Zinc precursors. In particular, the growth of high performance nanowire for high efficiency nano-devices must be formed at high temperature growth, but zinc precursors were evaporated at high temperature.These problems should be repaired for materialization of ultra high performance quantum devices with quantum effect. For this reason, we firstly proposed the growth method of vertical aligned slim MgZnO nanowires (< 10 nm) without interfacial layers using self-phase separation by introduced Mg at critical evaporation temperature of Zinc precursors ($500^{\circ}C$). Here, the self-phase separation was reported that MgO-rich and the ZnO-rich phases were spontaneously formed by additionally introduced Mg precursors. In the growth of nanowires, the nanowires were only grown on the wurzite single crystal seeds as ZnO-rich phases with relatively low Mg composition (~36 at %). In this study, we investigated the microstructural behaviors of self-phase separation with increasing the Mg fluxes in the growth of MZO NWs, in order to secure drastic control engineering of density,diameter, and shape of nanowires.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.600-606
• /
• 1999

A reactive type acoustic filter is developed based on the phase cancellation effect which is occurring in the plane wave propagation through the two paths where the cross sectional areas are reversely changing. The theory is experimentally validated by the use of a cylindrical duct and an inserted hollowed cone of which vertex part is eliminated. Noise attenuation and the filtered frequency are dependent on the area variation and the effective length of the filter. Experimental comparison shows that the filtered frequencies of 1st and 2nd mode are lower than the analytical prediction due to the mass loading effects, and the 3rd mode is in good agreement. The proposed filter can be applied as an in-duct noise filter for improving the sound quality in a narrow space for various industrial applications.

• Korean Journal of Veterinary Research
• /
• v.47 no.2
• /
• pp.241-245
• /
• 2007

Parallux (IDEXX Laboratories, USA), a solid-phase fluorescence immunoassay (SPFIA) developed for antibiotics residue detection in milk, was applied for analysis of antibiotics in muscle tissue of olive flounder (Paralichthys olivaceus), rockfish (Sebastes schlegeli), and red sea bream (Pagrus major). Fishes were dipped in streptomycin 20 g/ton water, the recommended therapeutic dose, for 3 consecutive days. Muscle was sampled after 1st, 2nd, 3rd, 4th and 5th day drug treatment. The concentration of streptomycin in muscle, determined by SPFIA, was compared with that of internal standard (200 ppb as streptomycin). The absorbance ratio of sample to internal standard (S/C) was employed as an index to determine the muscle residues in fishes. The standard solutions were added to muscle samples to give final concentrations in muscle of 0.2 and 0.5 mg/ml to investigate the recovery rate. The recovery rates of all spiked samples were > 84% of the spiked value. Streptomycin was detected in muscles of fishes treated after the 1st day of withdrawal period. The present study showed that the SPFIA can be easily adopted in predicting muscle tissue residues for streptomycin in farmed fishes.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.73-78
• /
• 2020

In this study, a novel reactive power control scheme is proposed to supply stable reactive power to the distribution line by compensating a ripple voltage of DC link. In a single-phase system, a magnitude of second harmonic is inevitably generated in the DC link voltage, and this phenomenon is further increased when the capacity of DC link capacitor decreases. Reactive power control was performed by controlling the d-axis current in the virtual synchronous reference frame, and the voltage control for maintaining the DC link voltage was implemented through the q-axis current control. The proposed method for compensating the ripple voltage was classified into three parts, which consist of the extraction unit of DC link voltage, high pass filter (HPF), and time delay unit. HPF removes an offset component of DC link voltage extracted from integral, and a time delay unit compensates the phase leading effect due to the HPF. The compensated DC voltage is used as feedback component of voltage control loop to supply stable reactive power. The performance of the proposed algorithm was verified through simulation and experiments. At DC link capacitance of 375 uF, the magnitude of ripple voltage decreased to 8 Vpp from 74 Vpp in the voltage control loop, and the total harmonic distortion of the current was improved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2900-2922
• /
• 2021

In this paper, the power spectral density(PSD) for Multilevel Minimum Shift Keyed signal with modulation index h = 1/2 (M-ary MSK) are derived using the mathematical method of the Markov Chain model. At first, according to an essential requirement of the phase continuity characteristics of MSK signals, a complete model of the whole process of signal generation is built. Then, the derivations for autocorrelation functions are carried out precisely. After that, we verified the correctness and accuracy of the theoretical derivation by comparing the derived results with numerical simulations using MATLAB. We also divided the spectrum into four components according to the derivation. By analyzing these figures in the graphic, each component determines the characteristics of the spectrum. It is vital for enhanced spectral characteristics. To more visually represent the energy concentration of the main flap and the roll-down speed of the side flap, the specific out-of-band power of M-ary MSK is given. OMLCD(Optimum Maximum Likelihood Coherent Detection) of M-ary MSK is adopted to compare the signal received with prepared in advance in a code element T to go for the best. And M-ary MSK BER(Bit Error Rate) is compared with the same ary PSK (Phase Shift Keying) with M=2,4,6,8. The results show the detection method could improve performance by increasing the length of L(memory inherent) in the phase continuity.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.37-37
• /
• 2003

Ferroelectric random acess memories (FeRAMs) 재료로 주목받고 있는 강유전 물질은 이미 여러 해 전부터 많은 물질들에 대해 연구가 진행되어 왔다. 그 중 낮은 공정 온도를 가지며 큰 remanent polarization 값을 갖는 lead zirconium titanate (PZT) 박막에 대해 많은 연구가 진행되고 있다. 하지만 Pt 기판위에 증착된 PZT 박막은 높은 피로 현상을 보이는 문제가 있다. 최근 Pulsed laser deposition이나 metal-organic vapor phase epitaxy (MOVPE) 등의 방법에 의해 epitaxial substituted-$Bi_4Ti_3O_{12}$ (La, Nd) 박막에 대해 보고가 되고 있다. 본 연구에서는 높은 remanent polarization 값을 갖는 $(Bi,Ce)_4Ti_3O_{12}$ (BCT) 박막을 pulsed laser deposition 방법을 사용하여 증착하였다. 또한 Bismuth의 양을 변화시켜 Bismuth의 양에 따른 remanent polarization의 변화를 확인하여 보았다. 사용된 기판은 Pt/$TiO_2$/$SiO_2$/Si 기판을 사용하였다.