• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.801-810
• /
• 2010

Until now, design of Earth Retaining is practiced by 2nd dimensional analysis for convenience of analysis and time saving. However, the construction field is 3rd dimension, in this study, practised the 3rd dimensional analysis which can reflect the field condition more exactly the scope of earth retaining wall, and researched about the effective and economical way of design, compared and reviewed with the results, by practising both the 2nd and 3rd dimensional analysis. existing 2nd dimension. the depth of excavation, depth of embedded and soil condition. As result, under the whole conditions, more displacement came to appear to the value as result of 3rd dimensional analysis more than the result of 2nd dimensional analysis. Accordingly, the displacement by the 2nd dimension analysis is underestimated. Moreover, results of 2nd and 3rd dimensional analysis, there is no difference at displacement, when the depth of embedded is 0.5H, 1.0H and 1.5H, but Displacement of 1.5H is smaller than 0.5H, 1.0H. That is, the bigger the depth of embedded becomes, the displacement of Earth Retaining Wall appeared smaller. The displacement of earth retaining wall according to depth of excavation appeared bigger, when the depth of excavation is increased. In the meantime, when the soil condition is different, in the 2nd dimensional analysis, the displacement appeared biggest, in case of the clay layer, but in the 3rd dimensional analysis, in the beginning of excavating, the displacement of earth retaining wall appeared bigger in case of clay layer, but as excavating is in progress, the displacement of both compound soil layer and sand layer appeared big.

• Food Science and Biotechnology
• /
• 제14권4호
• /
• pp.554-557
• /
• 2005

As a device for taste sensation, an 8-channel taste evaluation system was prepared and applied for discriminant analysis of marketed liquor. The biomimetic polymer membranes for the system were prepared through a casting procedure by employing polyvinyl chloride, bis (2-ethylhexyl)sebacate as plasticizer and electroactive materials such as valinomycin in the ratio of 33:66:1, and were separately attached over the sensitive area of ion-selective electrodes to construct the corresponding taste sensor array. The sensor array in conjunction with a double junction reference electrode was connected to a high-input impedance amplifier and the amplified sensor signals were interfaced to a personal computer via an A/D converter. When the signal data from the sensor array for 3 groups of marketed liquor like Maesilju, Soju and beer were analyzed by principal component analysis after normalization, it was observed that the 1st, 2nd and 3rd principal component were responsible for most of the total data variance, and the analyzed liquor samples were discriminated well in 2 dimensional principal component planes composed of the 1st-2nd and the 1st-3rd principal component.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.21-30
• /
• 2005

The purpose of this study is helps to make full use for perfect performance by grasping the defects of Tichonkich motion performed by athlete CSM For this, the study analyzed kinematical variables through Tichonkich motions performed at the first selection competition(1st trial) and final selection competition(2nd trial) for the dispatch to the 28th Athens Olympic Games using the three-dimensional cinematographical method with a high-speed video camera, and obtained the following results. 1. During Tichonkich motion, the execution time of up swing and the right hand moving to the left bar was shorter in the 2nd trial than the 1st one, while the execution time of down swing, the support of the left bar and the right hand moving to the right bar was longer in the 2nd trial than the 1st trial. 2. The horizontal position of COG in the 2nd trial was -35cm in the 1st stage, 42cm in the 3rd stage and 29cm in the 4th stage, that is, it showed a great swing focused on the circular movement compared to the 1st trial, while the vertical position of COG was -59cm in the 2nd stage, that is, it showed a small swing focused on a up and down movement. Also the 5th stage vertical position was 98cm, and the 6th stage vertical position was 95cm in the 2nd trial which were higher than those of the 1st trial, so it has provided magnificence required in the modern gymnastics. 3. And it was indicated that the horizontal velocity at the down swing phase proceeded forward more rapidly in the 2nd trial than that in the 1st trial, and the reverse ascent made a rapid vertical rise lessening left and right velocity change. And in the 5th stage, the 2nd trial was kept very slower in horizontal, vertical and left and right velocity that in the 1st trial, so it reached a handstand with leisurely movement. 4. In the 2nd trial, shoulder joint of the 1st, 2nd, 3rd stages kept a larger angle than that in the 1st trial, that is, it made a great swing while in the 1st trial, it showed a swing movement dependent on kick movement by the flexion and extension of hip joint. Also in the 2nd trial, the body formed a vertical posture with both hands supporting the left bar and hip joint was kept larger as $198^{\circ}$ and $190^{\circ}$ in the 5th and 6th stage than that in the 1st trial, so it made a handstand with the body uprightly stretched out, and magnificent and stable movement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.345-349
• /
• 2003

The dynamic behavior of CANDU nuclear fuel channel was analyzed by the use of 3-dimensional finite element method, under the various fault conditions such as a fault in the end fitting support and the removal/migration of the garter spring in the fuel channel, in order to predict the dynamic behavior for a degraded symptoms of CANDU nuclear fuel channel. Moreover, the frequency response analysis for possible fault conditions was also peformed considering the effects of the pressure tube vibration and flow-induced vibration by the coolant flow. From the analysis of the frequency responses, defects in the garter spring have influenced the changes of 2nd and 3rd modes and all the important modes are varied for the failure in the journal bearing in the end fitting body.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.501-532
• /
• 1996

This study investigated the effects of cantilever length, location and load condition on stress distribution developed in the implants, prostheses and supporting tissues. The osseointegrated prostheses with two 10mm Branemark implants at 2nd premolar and 1st molar sites with cantilever extensions at 1st premolar, 2nd and 3rd molar sites were constructed. Under 100N, 200N of vertical and $45^{\circ}$ oblique loads at the cantilever pontics, stress distribution patterns and displacement were analyzed with three dimensional finite element method. The results were as follows : 1. The stress was concentrated at the joint of the cantilever pontic and implant superstructure, the neck of implant and the ridge crest near the cantilever But there was little load transfer to the lower supporting tissues of implants. 2. The implant near the cantilever was displaced inferiorly while the implant far from the cantilever was displaced superiorly. In horizontal direction the implants were displaced to the direction where the loads were applied, except the apexes of the implants. 3. In case of anterior cantilever, the stress and displacement were higher than the prosthesis connected with natural tooth. 4. The stress developed in the posterior cantilevered type was higher than in the anterior cantilevered type. The greastest stress was concentrated at the ridge crest near the posterior cantilever. 5. The longer the cantilever, the more the stress was developed and was concentrated at the joint of the cantilever pontic and implant superstructure. 6. Under oblique load, the stress was concentrated at the necks of implants and the ridge crests, but decreased at the joint of the cantilever pontic and implant superstructure than under vertical load.

• 수산해양기술연구
• /
• 제27권3호
• /
• pp.193-210
• /
• 1991

For the deckhouse or superstructure, attention is directed to the reduction of vibration from a human susceptibility point of view. The two basic requirements for obtaining a low vibration level in the accommodation are to ensure that excitation forces from propeller and/or main engine are small and to avoid resonance excitation of the hull and superstructure. In recent years increased attention has been directed towards the problems of vibration and noise in deckhouse, which have caused major problems with regard to the environmental quality in the living quarters for crews. Accordingly, in this paper, the characteristic of the vibration of deckhouse of fishing boat, of which the length/height ratio is also relatively high, are studied systematically with regard to the shape and modelling of deckhouse based on finite element method of 1-dimensional, 2-dimensional and 3-dimensional model. This study is divided into 4-part. 1st part is the global deckhouse vibration, 2nd part is the local deckhouse vibration, 3rd part consists of the estimation for stiffness of foundational support and 4th part is the application to TUNA LONG LINER of 416 ton class. For the global vibration analysis, the severity of the vibration depends on the longitudinal shear and bending stiffness of the deckhouse, on the vertical deckhouse support(fore, aft and sides). However, even if the design is technically sound, vibration problems may arise due to vertical or longitudinal hull girder or afterbody resonances. Author applied the method of this study to the analysis of, deep-sea fishing vessel of G.T. 416 ton class with relatively low height and long deckhouse, and investigated the vibrational characteristic of the fishing vessel with earlier structural feature. According to this investigation, the vibration, response of above vessel was confirmed of which main hull and deckhouse behave as one body. It is at the bottom of vibrational trouble which a accommodation part of the fishing vessel is raised, that is the local vibration for side wall, fore-aft wall and deck plate of deckhouse rather than thief fect of fore-aft vibration of deckhouse for above fishing vessel. and the resonance of main hull, deckhouse and driving system such as the main engine, propeller in exciting source is mainly brought up as the trouble.

• International Journal of Contents
• /
• 제3권2호
• /
• pp.1-5
• /
• 2007

This paper proposes a technique for principal component analysis (PCA) to raise the recognition rate of a front face in a low dimension by hierarchical image and parallel processing structure. The conventional PCA shows a recognition rate of less than 50% in a low dimension (dimensions 1 to 6) when used for facial recognition. In this paper, a face is formed as images of 3 fixed-size levels: the 1st being a region around the nose, the 2nd level a region including the eyes, nose, and mouth, and the 3rd level image is the whole face. PCA of the 3-level images is treated by parallel processing structure, and finally their similarities are combined for high recognition rate in a low dimension. The proposed method under went experimental feasibility study with ORL face database for evaluation of the face recognition function. The experimental demonstration has been done by PCA and the proposed method according to each level. The proposed method showed high recognition of over 50% from dimensions 1 to 6.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.295-306
• /
• 2013

The purpose of this study was to provide high school male shot putters training methods of gliding and delivery motion through comparative analysis of kinematic characteristics. To accomplish this purpose, three dimensional motion analysis was performed for the subjects(PKC, KKH, YDL) who participated in high school male shot putter competition on 92nd (2011), 93rd (2013) National Sports Festival. The subjects were filmed by four Sony HXR-MC2000 video cameras with 60 fields/s. The three-dimensional kinematic data of the glide, conversion and delivery phase were obtained by Kwon3d 3.1 version. The data of the shoulder rotational angles and projection angles were calculated with Matlab R2009a. The following conclusions had been made. With the analysis of the gliding and stance length ratio, the gliding length was shorter at the TG than the SG with short-long technique but the gliding and stance length ratio was 46.8:53.2% respectively. The deviation of the shots trajectory from APSS(Athlete-plus-shot-system) revealed that the PKC showed similar to "n-a-b-c-I" of skilled S-shape type, KKH and YDL showed "n-a-d-f-I'" of unskilled type. Furthermore, they showed smaller radial distance from the central axis of the APSS and the shots were away from the linear trajectory. From this characteristics, The PKC who performed more TG than SG had shorter glide with S-shape of APSS(skilled type) showed the better record than others with technical skill. But KKH and YDL had bigger glide ratio with "n-a-d-f-I'" of unskilled type and improved their records with technical factor. The projection factor had an effect on the record directly. Because PKC maintained more lower glide and transition posture with momentum transfer through COG's rapid horizontal velocity respectively the subject possessed the characteristics of high horizontal and vertical velocity with large turning radius from shot putter to APSS.

• 암석학회지
• /
• 제16권3호
• /
• pp.144-161
• /
• 2007

낭산지역 일대의 쥬라기 흑운모 화강섬록암은 담회색, 치밀조직을 이루는 중립질암이다. 암체에 대한 광역적인 열극체계 분석결과는 다음과 같다. 열극의 주향은 빈도등급에 의하여 크게 세 방향으로 분류가 가능하다. 이들 열극은 빈도등급에 의하여 (1) $N80^{\circ}{\sim}90^{\circ}E$ (1st-order)>(2) $N70^{\circ}{\sim}80^{\circ}E$ (2nd-order)>(3) $NS{\sim}N10^{\circ}E$ (3rd-order)의 순으로 나타난다. 특히 이들 열극의 간격은 200 cm 미만의 것들이 대부분을 차지한다. 따라서 분석된 열극체계 및 간격으로 미루어 낭산일대에서는 규격석보다 비규격석의 산출이 훨씬 많아 쇄석자원의 잠재성이 더 클 것으로 해석된다. 특히 밀집하는 기존 석산의 수직상 채석면의 방향도 빈도등급에 의하여 두 그룹으로 분류되어, (1) $N14^{\circ}W{\sim}N16^{\circ}E$ (1st-order)와 (2) $N78^{\circ}E{\sim}N88^{\circ}E$ (2nd-order)에서 뚜렷이 우세하다. 상기한 두 그룹의 수직상 채석면의 방향은 광역적 열극체계와는 다소 차이가 있다. 이와 같은 현상은 단위 석산에서 발달하는 미세균열의 배향성과 크게 관련되는 것으로 볼 수 있다. 낭산지역의 물성 중에서 비중, 흡수율, 공극률, 압축강도, 인장강도와 마모경도는 각각 2.65, 0.28%, 0.73%, $1,628kg/cm^2,\;100kg/cm^2$ 및 31의 평균값을 가진다. 공극률의 경우와는 달리, 낭산 및 속리산지역의 화강암류는 상호 유사한 마모경도를 가진다. 이는 마모저항의 지표로 간주되는 석영과 알칼리장석의 모우드 값의 차이로 설명될 수 있다. 한편 낭산지역의 연구를 통하여 규명된 수직상 채석면의 방향 및 각종 물성특성의 전반적인 이해는 차후 이 지역의 암석자원 활용 시주요 정보로 활용될 것으로 기대된다.

• Applied Biological Chemistry
• /
• 제47권3호
• /
• pp.300-306
• /
• 2004

양이온 및 음이온 반응성의 고분자막 8종을 casting 법에 의하여 제조한 후 이온전극에 장착하여 다채널 맛 평가시스템의 비선택성 센서 어레이를 구성하였다. 맛 센서 어레이에 의한 전기화학계측은 전위법에 의하여 행하였으며, 이 때 센서 어레이를 구성하는 각각의 맛 센서로 측정한 전위간을 막 전위 증폭기를 거쳐 증폭한 후 다채널 A/D converter를 통하여 PC에 접속하였다. 식혜, 수정과, 감귤쥬스 등 6종 24점의 시판음료를 다채널 맛 평가시스템으로 분석한 후 각 센서의 계측신호에 대한 정규화를 행하고 주성분 분석을 행하였을 때 5종 음료군의 조합에서는 제1 주성분 및 제2 주성분의 합이 전체 데이터 변이의 $70.73{\sim}85.32%$를 설명하는 것으로 나타났으며 6종 음료군의 경우에는 제1 주성분 및 제2 주성분의 합과 제1 주성분, 제2 주성분 및 제3 주성분의 합이 전체데이터 변이의 81.46%와 89.56%를 각각 설명하는 것으로 나타났다. 3차원 공간상에 6종 음료군에 대한 계측결과를 맵핑하였을 때 이들의 구분이 가능하였으며, 5종 음료군의 조합에서는 2가지 경우에 있어 2차원 평면상에서 구분되었다.