• Structural Engineering and Mechanics
• /
• 제49권1호
• /
• pp.65-80
• /
• 2014

This paper reports on the development of a minimum cost design model and its application for obtaining economic designs for reinforced High Strength Concrete (HSC) T-sections in bending under ultimate limit state conditions. Cost objective functions, behavior constraint including material nonlinearities of steel and HSC, conditions on strain compatibility in steel and concrete and geometric design variable constraints are derived and implemented within the Conjugate Gradient optimization algorithm. Particular attention is paid to problem formulation, solution behavior and economic considerations. A typical example problem is considered to illustrate the applicability of the minimum cost design model and solution methodology. Results are confronted to design solutions derived from conventional design office methods to evaluate the performance of the cost model and its sensitivity to a wide range of unit cost ratios of construction materials and various classes of HSC described in Eurocode2. It is shown, among others that optimal solutions achieved using the present approach can lead to substantial savings in the amount of construction materials to be used. In addition, the proposed approach is practically simple, reliable and computationally effective compared to standard design procedures used in current engineering practice.

• International Journal of Concrete Structures and Materials
• /
• 제10권2호
• /
• pp.149-161
• /
• 2016

This paper presents an experimental work to study the flexural strength of reinforced concrete (RC) beams strengthened by partially de-bonded near surface-mounted (NSM) fiber reinforced polymer (FRP) strip with various de-bonded length. Especially, considering high anchorage capacity at end of a FRP strip, the effect of de-bonded region at a central part was investigated. In order to check the improvement of strength or deformation capacity when the bonded surface area only increased without changing the FRP area, single and triple lines of FRP were planned. In addition, the flexural strength of the RC member strengthened by a partially de-bonded NSM FRP strip was evaluated by using the existing researchers' strength equation to predict the flexural strength after retrofit. From the study, it was found that where de-bonded region exists in the central part of a flexural member, the deformation capacity of the member is expected to be improved, because FRP strain is not to be concentrated on the center but to be extended uniformly in the de-bonded region. Where NSM FRP strips are distributed in triple lines, a relatively high strength can be exerted due to the increase of bond strength in the anchorage.

• The Plant Pathology Journal
• /
• 제33권6호
• /
• pp.614-618
• /
• 2017

The root-knot nematode Meloidogyne incognita infects a variety of plants, including Arabidopsis thaliana. During migration, root-knot nematodes secrete different proteins to modify cell walls, which include pectolytic enzymes. However, the contribution of host cell wall proteins has not been described during this process. The function of two DUF642 cell wall proteins, BIIDXI (BDX, At4g32460) and TEEBE (TEB, At2g41800), in plant development could be related to the regulation of pectin methyl esterification status in the cell walls of different tissues. Accordingly, the expression of these two genes is up-regulated by auxin. BDX and TEB were highly induced during early M. incognita inoculation. Moreover, cell wall localization of the proteins was also induced. The cell wall localization of BDX and TEB DUF642 proteins during M. incognita early inoculation suggested that these two proteins could be involved in the regulation of the degree of pectin methylation during cell separation.

• Journal of Electrochemical Science and Technology
• /
• 제15권2호
• /
• pp.276-290
• /
• 2024

A study of the transition from transitory state to steady state in DSSCs based on natural dyes is presented; cochineal was used as dye and Li⁺, Na⁺, and K⁺ were the ions added to the electrolyte. The photocurrent profiles were obtained as a function of time. Several DSSCs were prepared with different cations and their role and the transitory-to-steady transition was determined. A novel hybrid charge carrier source model based on the Heaviside function H(t) and the Lambert-Beer law, was developed and applied to analysis of the transient response of the output photocurrent. Additionally, the maximum effective light absorption coefficient α and the electronic extraction rate κ for each ion were determined: ${\alpha}_{Li^+,Na^+,K^+}\,=\,(0.486,\,0.00085,\,0.1126)\,cm^{-1}$, and also the electronic extraction rate ${\kappa}^{Li^+,Na^+,K^+}_{ext.}\,=\,(1410,\,19.07,\,19.69)\,cm\,s^{-1}$. The impedance model using Fick's second law was developed for carrier recombination to characterize the photocurrent.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권10호
• /
• pp.5063-5067
• /
• 2012

New molecular markers of cancer had emerged with novel applications in cancer prevention and therapeutics, including for breast cancer of unknown causes, which has a high impact on the health of women worldwide. The purpose of this research was to detemine protein and mRNA expression of synaptic vesicle 2 (SV2) isoforms A, B and C in breast cancer cell lines. Cultured cell lines MDA-MB-231, SKBR3, T47D were lysed and their protein and mRNA expression analyzed by real-time PCR and western blot technique, respectively. SV2A, B proteins were identified in non-tumor (MCF-10A) and tumor cell lines (MDA-MB-231 and T47D) while SV2C only was found in the T47D cell line. Furthermore, the genomic expression was consistent with protein expression for a such cell line, but in MDA-MB-231 there was no SV2B genomic expression, and the SV2C mRNA and protein were not found in the non tumoral cell line. These findings suggest a possible cellular transdifferentiation to neural character in breast cancer, of possible relevance to cancer development, and point to possible use of SV2 as molecular marker and a vehicle for cancer treatment with botulinum toxin.

• 청정기술
• /
• 제16권4호
• /
• pp.254-257
• /
• 2010

중국 Liaoning에서 산출된 천연 수활석(brucite)을 원료로 $Mg(OH)_2$ slurry를 제조하고, 그 탈황 성능을 조사하였다. 수활석의 입도분포의 차이 및 수열처리에 의한 활성화 효과를 검토하였다. 80 mesh 이하의 수활석 시료에 비해 입자의 크기가 작고 입도분포가 좁은 1000 mesh 이하의 사료가 de-$SO_2$ 효율이 더 높은 것을 확인할 수 있었다. 한편, 80 mesh 이하의 수활석 시료를 비교적 낮은 온도인 363 K에서 3 h 동안 수열 처리하여 매우 높은 de-$SO_2$ 성능 개선 효과를 얻을 수 있었다.

• 방송공학회논문지
• /
• 제16권5호
• /
• pp.722-737
• /
• 2011

본 논문에서는 MPEG-2 TS (transport stream)를 포함하는 TCP 패킷들을 유무선 인터넷 환경에서 프로그레시브 스트리밍 서비스를 통해 클라이언트로 전달할 때 발생하게 되는 네트워크 jitter 를 추정하는 기법을 제안한다. 추정된 네트워크 jitter의 크기를 바탕으로 네트워크 jitter를 흡수할 수 있는 수신측에서 필요한 de-jitter 버퍼링 시간을 계산할 수 있다. 이를 위해서 TS 패킷에 기록되어 있는 PCR (program clock reference) 정보를 활용하여 TCP 패킷 헤더의 optional 필드에 jitter 크기 추정에 필요한 새로운 타임스탬프 정보를 생성한다. 제안된 de-jitter 버퍼링 기법을 IP 망을 통한 프로그레시브 스트리밍 서비스에 활용할 경우 기존의 T-STD 버퍼 모델의 동작 원리를 그대로 따를 수 있게 되어 기존의 T-STD 버퍼 모델을 수정 없이 활용할 수 있다. 제안된 기법은 최근에 국제표준으로 개발된 MPEG DASH (dynamic adaptive streaming over HTTP) 기술에 응용될 수 있다.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.24-30
• /
• 2010

In this study, numerical experiments were carried out to estimate the SCR De-NOx performance in DOC plus SCR systems. The SCR De-NOx phenomena are described by Langmuir-Hinshelwood reaction scheme. After validating the present approach by comparing the present results with the experimental results, such various parameters as space velocity, $H_2O$ concentration, $NO_2$/NOx ratio and relative volume of DOC are explored to increase the SCR De-NOx performance. The results indicate that SCR De-NOx performance largely depends on space velocity and $NO_2$/NOx ratio, especially below $200^{\circ}C$. SCR De-NOx performance is seriously affected by relative volume of DOC with SCR due to increasing in $NO_2$/NOx ratio at below $250^{\circ}C$.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권20호
• /
• pp.8749-8752
• /
• 2014

Purpose: This study aimed to determine the patterns of follow-up visits for cervix cancer in a national cancer center in Mexico. Materials and Methods: The National Cancer Institute of Mexico is cancer center with 119 beds that mostly cares for an underserved and socially disadvantaged population. The medical records of cases of cervical cancer that had at least one year of clinical follow-up after being in complete response at the end of primary treatment were analyzed. We recorded the numbers of total and yearly follow-up visits and these were compared with the number of follow-up visits recommended by the National Comprehensive Cancer Network 2013, version 2 for cervical cancer. Results: Between March and June 2007, the medical records of 96 consecutive patients were reviewed. Twenty (21%) of these met inclusion criteria and were selected. In the first year the median number of visits was 11 (4-20). In the ensuing years, $2^{nd}$, $3^{rd}$, $4^{th}$ and $5^{th}$, the number of analyzed patients remaining in follow-up decreased to 17, 14, 13 and 9 respectively. There were 462 follow-up visits to primary treating services (Gynecology Oncology, Radiation Oncology and Medical Oncology) as compared to 220 suggested by the NCCN guidelines ($X^2$ test p<0.0001). There were 150 additional visits to other services. Conclusions: Our results suggest that in our institution there is an overuse of oncological services by cervical cancer patients once treatment is completed.

• 대한치과교정학회지
• /
• 제51권2호
• /
• pp.115-125
• /
• 2021

Objective: To evaluate the reasons influencing the preferences for a certain type of orthodontic appliance over another among prospective patients (PP) and orthodontists. Methods: A total of 49 PP and 51 orthodontists were asked about their preferences for the following appliances: clear aligners (CA), lingual metallic brackets (LMB), polycrystalline and monocrystalline ceramic brackets, and buccal metallic brackets (BMB). The participants rated the importance of 17 potential reasons that would explain their choices. The reasons that contributed most to these preferences were identified. Non-parametric tests (Fisher's exact, χ2 and Mann-Whitney tests) and multivariate analyses (regression and discriminant analysis) were used to assess the data (α = 0.05). Results: CA and BMB were the most chosen appliances by PP and orthodontists, respectively. LMB was the most rejected option among both groups of participants (p < 0.001). Rates of the importance of pain/discomfort, smile esthetics, finishing details, and feeding/speech impairment showed the highest differences between PP and orthodontists (p < 0.0005). Discriminant analyses showed that individuals who considered treatment time and smile esthetics as more important were more likely to prefer CA, while those who prioritized finishing details and cost were more likely to choose BMB (p < 0.05). Conclusions: Reasons related to comfort and quality of life during use were considered as more important by PP, while those related to the results and clinical performance of the appliances were considered as more relevant by orthodontists.