• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.71-74
• /
• 2003

The cell modeling homogenization method to derive the constitutive equation considering the microstructures of the fiber reinforced composites has been previously developed for composites with simple microstructures such as 2D plane composites and 3D rectangular shaped composites. Here, the method has been further extended for 3D circular braided composites, utilizing B-spline curves to properly describe the more complex geometry of 3D braided composites. For verification purposes, the method has been applied for orthotropic elastic properties of the 3D circular braided glass fiber reinforced composite, in particular for the tensile property. Prepregs of the specimen have been fabricated using the 3D braiding machine through RTM (resin transfer molding) with epoxy as a matrix. Experimentally measured uniaxial tensile properties agreed well with predicted values obtained fer two volume fractions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E2
• /
• pp.75-81
• /
• 2003

Variational data assimilation, which is recently introduced to the air quality modeling, is a promising tool for obtaining optimal estimates of initial conditions and other important parameters such as emission and deposition rates. In this paper. two advanced techniques for variational data assimilation, based on the adjoint and quasi-inverse methods, are tested for a simple air quality problem. The four-dimensional variational assimilation (4D-Var) requires to run an adjoint model to provide the gradient information in an iterative minimization process, whereas the inverse 3D-Var (I3D-Var) seeks for optimal initial conditions directly by running a quasi -inverse model. For a process with small dissipation, I3D-Vu outperforms 4D-Var in both computing time and accuracy. Hybrid application which combines I3D-Var and standard 4D-Var is also suggested for efficient data assimilation in air quality problems.

• Journal of KIBIM
• /
• v.5 no.2
• /
• pp.12-18
• /
• 2015

Bridge piers typically have circular or rectangular shapes without decorative design. Prefabrication for accelerated construction has been widely adopted in bridge structures. Cost for steel formwork is a main restriction of creative irregular shapes. 3D modelling techniques allow creative design of columns and 3D printing provides possibility to minimize the fabrication cost. In this paper, 3D design process of bridge piers was suggested by converting 2D picture into 3D decorative shape. Formwork design using 3D printed panels was also proposed and mock-up tests were conducted. Precast columns need accurate geometry control from fabrication to assembly. Laser scanning and geometry control devices were adopted. Through the digitalized process of design, fabrication and assembly, creative design of structures can be realized in reasonable cost range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1505-1510
• /
• 2018

Product modeling technology for graphics is rapidly developing. And 3D data application and usability are increasing.modeling of product design is a very important factor in constructing. 3D modeling in product design takes a lot of production time. Recently, the reverse design method is very useful because of application of 3D data and shortening of production time. In this study, first, 3D point cloud and mesh data are generated using photographs based on image data. The second is to modify the design and the third is to make the prototype with the 3D printer. This product design and production process suggests the utilization and possibility of image data, the shortening of 3D modeling production time and efficient processes. Also, the product design process proposes a model of a new product development system to adapt to the production environment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2009

This paper suggests to apply mirror-reflected method based 2D emotion recognition database to 3D application. Also, it makes facial expression of fuzzy modeling using probability of emotion. Suggested facial expression function applies fuzzy theory to 3 basic movement for facial expressions. This method applies 3D application to feature vector for emotion recognition from 2D application using mirror-reflected multi-image. Thus, we can have model based on fuzzy nonlinear facial expression of a 2D model for a real model. We use average values about probability of 6 basic expressions such as happy, sad, disgust, angry, surprise and fear. Furthermore, dynimic facial expressions are made via fuzzy modelling. This paper compares and analyzes feature vectors of real model with 3D human-like avatar.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.91-97
• /
• 2010

Micro-abrasive Jet Machining is one of the new technology which enables micro-scale machining on the surface of high brittle materials. In this technology it is very important to fabricate a mask that prevents excessive abrasives not to machine un-intend surface. Our previous work introduced the micro-stereolithography technology for the mask fabrication. And is good to not only planar material but also for non-planar materials. But the technology requires a 3 dimensional mask CAD model which is perfectly matched with the surface topology of parent material as an input. Therefore there is strong need to develop an automated modeling technology which produce adequate 3D mask CAD model in fast and simple way. This paper introduces a fast and simple mask modeling algorithm which represents geometry of models in voxel. Input of the modeling system is 2D pattern image, 3D CAD model of parent material and machining parameters for Micro-abrasive Jet Machining. And the output is CAD model of 3D mask which reflects machining parameters and geometry of the parent material. Finally the suggested algorithm is implemented as software and verified by some test cases.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.2
• /
• pp.1-6
• /
• 2012

Four dimensional(4-D) trajectory modeling is conducted based on flight plan. The flight plan is divided into several segments which represent certain operating flight modes. Thrust, drag and fuel consumption rate of an aircraft are calculated using BADA provided by Eurocontrol. The trajectory is modeled with the rate of climb/descent calculated with Total-Energy Equation. The simulation results with a typical aircraft and its flight plan indicate that the trajectory modeled corresponds well with the suggested flight plan. The performance profiles including total endurance time and time history for speed, thrust, drag and fuel consumption were also appropriately generated.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.87-93
• /
• 2013

In this research, a new methodology to perform building energy analysis using Industry Foundation Classes (IFC) standard has been studied. With the help of Archicad 14 modeling software, a 3D test model is generated and then exported to IFCXML format. A ruby code program retrieves the building information from the resulting IFCXML file using Nokogiri library. An INP file is created and gets ready for next energy analysis step. DOE 2.2 program analyzes the INP file and gives a detailed report of the energy cost of the building. Case study shows when using the IFC standard method, the Interoperability of the energy analysis is greatly improved. The main stream 3D building modeling software supports IFC standard. DOE 2.2 is able to read the INP file generated by IFC file. This means almost any 3D model created by main stream modeling software can be analyze in terms of energy cost Thus, IFC based energy analysis method has a promising future. With the development and application of IFC standard, designers can do more complex and easy-to-run energy analysis in a more efficient way.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.189-196
• /
• 2015

The proposed cooperative 3D modelling system enables more efficient modeling works by improving current cooperation systems. Current 3D modeling tasks work on off-line and most of works are cooperation systems which communicate by files. These cooperation system cannot be interactive, occurs time delay while feedback and must have some programs which can read the files. This paper solves these problems using web that has the characteristics of network and proposes new cooperation system form. Using WebGL(Web Graphics Library) which is proposing technology in technical realization of Web 3D modeling, we make 3D objects in web browser and these objects can be manipulated by server-client communication. Therefore, if people use this system, they can use real time interaction and feedback. Also this system lowers a software installation necessity and can access everytime if web browser is installed.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.337-344
• /
• 2016

The purpose of this study was to evaluate the radiolucency for the phantom output to the 3D printing technology. The 3D printing technology was applied for FDM (fused deposition modeling) method and was used the material of ABS (acrylonitrile butadiene styrene) resin. The phantom was designed in cylindrical uniformity. An image uniformity was measured by a cross-sectional images of the 3D printed phantom obtained from the CT equipment. The evaluation of radiolucency was measured exposure dose by the inserted ion-chamber from the 3D printed phantom. As a results, the average of uniformity in the cross-sectional CT image was 2.70 HU and the correlation of radiolucency between PMMA CT phantom and 3D printed ABS phantom is found to have a high correlation to 0.976. In the future, this results will be expected to be used as the basis for the phantom production of the radiation quality control by used 3D printing technology.