• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.420-425
• /
• 2012

Lead-free piezoelectric ceramic/epoxy composites with '0-3' connectivity were prepared by cold-pressing with a temperature controlled curing method. A ceramic powder with a composition of $(Na_{0.51}K_{0.47}Li_{0.02})(Nb_{0.8}Ta_{0.2})O_3$ was synthesized by a conventional solid state reaction route. The dielectric and piezoelectric properties of ceramic/epoxy composites were characterized as a function of the volume fraction (${\phi}$) of piezoelectric ceramics, which was varied from 70 to 95 vol%. The results indicated that the piezoelectric properties of composites were significantly affected by the volume fraction of ceramics. In terms of the piezoelectric properties, specimens showed the best performance at ${\phi}$= 85 vol%, resulting in the piezoelectric constant $d_{33}$ of 39 pC/N and the figure of merit as a piezoelectric energy harvester ($d_{33}{\cdot}g_{33}$) of 1.24 $pm^2/N$.

• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.238-246
• /
• 2016

Water purification facilities utilizing three technologies - a detention pond, an artificial wetland and an ecological revetment - were installed in waterfront spaces, including river embankments and watersides that have so far been left neglected, and then their water purification levels were analyzed in this study. The water purification facilities were found to show average removal efficiencies of 48.6% in suspended solid (SS), 30.5% in biochemical oxygen demand (BOD), 18.4% in total nitrogen (T-N) and 27.3% in total phosphorus (T-P) during rainfall. The removal efficiencies during non-rainfall were 33.2% in SS, 28.6% in BOD, 13.7% in T-N and 17.3% in T-P. These results showed that the water purification facilities using a detention pond, an artificial wetland and an ecological revetment can be used as a useful natural water purification technology in in waterfront spaces.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.105-109
• /
• 2014

Structure and electrical properties of $0.85NaNbO_3-0.15LiNbO_3$ ($(Li_{0.15}Na_{0.85})NbO_3$) ceramics were investigated as a function of sintering temperature. $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were prepared by conventional solid state processing. A main phase of the orthorhombic perovskite structure and secondary phase of $LiNbO_3$ were confirmed for all sintered specimens. Dense $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were obtained at sintering temperature above $1050^{\circ}C$. With increasing sintering temperature, the electromechanical coupling factor ($k_p$), piezoelectric constant ($d_{33}$) and relative dielectric constant (${\varepsilon}_r$) of the sintered specimens increased, while the mechanical quality factor ($Q_m$) decreased. These results are due to the increase of grain size and crystallite size of orthorhombic perovskite structure. Based on the temperature dependence of ${\varepsilon}_r$, stable piezoelectric properties were expected because no phase transition found up to $300^{\circ}C$. Typically, kp of 18%, $d_{33}$ of 34.7 pC/N, ${\varepsilon}_r$ of 135, and $Q_m$ of 62.8 were obtained for the specimens sintered at $1200^{\circ}C$ for 5 h.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.147-158
• /
• 2014

In order to investigate how the microstructure of fuel/matrix-interaction (FMI) layers change during irradiation, different U-7Mo dispersion fuel plates have been irradiated to high fission density and then characterized using scanning electron microscopy (SEM). Specifially, samples from irradiated U-7Mo dispersion fuel elements with pure Al, Al-2Si and AA4043 (~4.5 wt.%Si) matrices were SEM characterized using polished samples and samples that were prepared with a focused ion beam (FIB). Features not observable for the polished samples could be captured in SEM images taken of the FIB samples. For the Al matrix sample, a relatively large FMI layer develops, with enrichment of Xe at the FMI layer/Al matrix interface and evidence of debonding. Overall, a significant penetration of Si from the FMI layer into the U-7Mo fuel was observed for samples with Si in the Al matrix, which resulted in a change of the size (larger) and shape (round) of the fission gas bubbles. Additionally, solid fission product phases were observed to nucleate and grow within these bubbles. These changes in the localized regions of the microstructure of the U-7Mo may contribute to changes observed in the macroscopic swelling of fuel plates with Al-Si matrices.

• Journal of Service Research and Studies
• /
• v.5 no.2
• /
• pp.199-216
• /
• 2015

The current research suggests a new service research framework for service researchers and practitioners. A comprehensive and streamlined research framework is essential for rapid growth of service industry with support of academic researches. An in-depth analysis on relevant service research fremeworks and major research issues on service sector and service nature has been performed. Past and present research frameworks on service sector have been reviewed based on the nature of service and the desirability for service industry development. A new research framework has been derived and a five-section model has been suggested. The results of this research can be used for finding useful research topics in service sector. Future research is needed to develop service research as a solid and major academic field in the new economy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.380-385
• /
• 2016

Thermal characteristics of 20 W LED module on light thermal conductive plastic (TCP) heat sink were investigated in comparison with that on aluminum die casting alloy (ADC-12). Thermal simulations of the heat sinks were conducted by using flow simulation of SolidWorks with the following input parameters: density is 1.70 and $2.82kg/m^2$, thermal conductivity is 20 and $92W/(m{\cdot}K)$ for TCP and ADC-12, respectively. The simulated and measured temperatures of the LED modules on TCP heat sink were consistent with its measured temperature, which was $3^{\circ}C$ higher that on ADC-12. The fabricated LED module on TCP heat sink with a weight of 120.5 g was 30% lighter in weight than that of the ADC-12 reference with 171.0 g.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.3
• /
• pp.208-215
• /
• 2017

This study was designed to investigate the carryover effects of high-forage to concentrate (F: C) diet in bred heifers on feed intake, feed efficiency (FE) and milk production of primiparous lactating Holstein cows. The experiment was conducted for 589 days (d) from onset of pregnancy through to the end of first lactation. Twenty-four bred heifers (Body weight: $BW=345.8{\pm}45.4kg$ and $15{\pm}1.2mon$ of age) randomly assigned to two groups of 3 pens containing 4 heifers each and fed high forage (HF) diet with F: C ratio of 91.7: 8.3% and low forage (LF) diet with F: C ratio of 77.8: 22.2% throughout the pregnancy period. After calving, lactating cows were fed total mixed ration (TMR) based diet. No differences (p > 0.05) were observed in dry matter intake (DMI) of bred heifers and primiparous lactating cows in both HF and LF groups. The FE of mid-to-late lactation period was higher (p< 0.05) in HF than LF group. However, the HF group showed higher (p < 0.05) milk yield, 4 % fat corrected milk (FCM) and energy corrected milk (ECM) than LF group during the 305 d lactation. The LF group showed higher (p < 0.05) milk fat, crude protein (CP), milk urea nitrogen (MUN), solid not fat (SNF) and somatic cell count (SCC) than HF group. It is concluded that restriction of F: C ratio to 91.7: 8.3% to bred heifers has the potential carryover effects to maintain higher milk yield and FE with no adverse effect on feed intake and milk composition of primiparous lactating Holstein cows.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.2
• /
• pp.122-128
• /
• 2023

A beverage was developed using the Abeliophyllum distichum leaf (AL). The beverage was prepared by adding it to apple juice by concentration, and physicochemical quality, antioxidant activities, and sensory evaluation were measured. Soluble solid and reducing sugar content of the control were 12.57 °Brix and 11.40%, respectively, and there was no difference from the group with addition of the AL extract. However, pH was slightly increased upon addition of AL extract. Lightness and yellowness increased when AL extract was added. Verbascoside content was not detected in the control, but it increased as the concentration of AL extract increased. The contents of ascorbic acid and flavonoids were 5.38 and 20.42 mg%, respectively, and there was no significant difference between the groups. However, the content of polyphenols increased as the concentration of the AL extract increased. DPPH radical and metal ion scavenging activity were increased by addition of the AL extract, but there was no difference in the ABTS radical scavenging activity. As a result of the sensory evaluation, there was no difference from the control even wihen the AL extract was added; thus, it was considered that there was no problem with the degree of acceptability when added within about 300 ppm.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.335-342
• /
• 2015

Phononic crystals are composite materials consisting of a periodic arrangement of scattering inclusions in a host material. One of the most important properties of phononic crystals is the existence of band gaps, i.e., ranges of frequencies at which acoustic waves cannot propagate through the structure. The present study aims to investigate theoretically and experimentally the acoustic band structures in two-dimensional (2D) phononic crystals consisting of periodic square arrays of stainless steel solid cylinders with a diameter of 1 mm and a lattice constant of 1.5 mm in water. The theoretical dispersion relation that depicts the relationship between the frequency and the wave vector was calculated along the ${\Gamma}X$ direction of the first Brillouin zone using the finite element method to predict the band structures in the 2D phononic crystals. The transmission and the reflection coefficients were measured in the 2D phononic crystals with 1, 3, 5, 7, and 9 layers of stainless steel cylinders stacked in the perpendicular direction to propagation at normal incidence. The theoretical dispersion relation exhibited five band gaps at frequencies below 2 MHz, the first gap appearing around a frequency of 0.5 MHz. The location and the width of the band gaps experimentally observed in the transmission and the reflection coefficients appeared to coincide well with those determined from the theoretical dispersion relation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.110-118
• /
• 2002

The element free Galerkin method has been suggested by Belyschko, etc. it is applied for linear elastic analysis of solid problems and its convergence characteristics and stability are shown according to the weight function, influence domain and scattered points. The various numerical examples are performed to check the efficiency of 1D EFG and 2D EFG program by changing factors. As a result it have the best results when it used the cubic spline weight function and the scaling parameter d$_{max}$=2. These programs were developed by mixed language programming method using Visual Basic and the C language. so it is fast and efficient. and visually shown the result.t.