• Journal of Surface Science and Engineering
• /
• v.48 no.3
• /
• pp.82-86
• /
• 2015

$Dy^{3+}$- and $Eu^{3+}$-codoped $CaMoO_4$ Phosphors were synthesized by using the solid-state reaction method. The crystal structure, morphology, and optical properties of the resulting phosphor particles were investigated by using the X-ray diffraction, field-emission scanning electron microscopy, and photoluminescence spectroscopy. XRD patterns exhibited that all the synthesized phosphors showed a tetragonal system with a main (112) diffraction peak, irrespective of the content of $Eu^{3+}$ ions. As the content of $Eu^{3+}$ ions increased, the grains showed a tendency to agglomerate. The excitation spectra of the synthesized powders were composed of one strong broad band centered at 305 nm in the range of 220 - 350 nm and several weak peaks in the range of 350 - 500 nm resulting from the 4f transitions of activator ions. Upon ultraviolet excitation at 305 nm, the yellow emission line due to the $^4F_{9/2}{\rightarrow}^6H_{13/2}$ transition of $Dy^{3+}$ ions and the main red emission spectrum resulting from the $^5D_0{\rightarrow}^7F_2$ transition of $Eu^{3+}$ ions were observed. With the increase of the content of $Eu^{3+}$, the intensity of the yellow emission band gradually decreased while that of the red emission increased. These results indicated that the emission intensities of yellow and red emissions could be modulated by changing the content of the $Dy^{3+}$ and $Eu^{3+}$ ions incorporated into the host crystal.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.117-128
• /
• 2016

Chemical reaction tests were performed to assess the properties of hardened specimens of cement pastes (KS-1 Portland and Class G) exposed to supercritical CO₂ for 1, 10, and 100 days. After exposure, the samples' measured permeability and strength were compared with values measured for pristine samples. The pristine cements had permeabilities of 0.009~0.025 mD, which increased by one order of magnitude after 100 days of exposure (to 0.11~0.29 mD). The enhancement of permeability is attributed to the stress release experienced by the samples after removal from the pressure vessel after exposure. Despite its enhancement, the measured permeability mostly remained lower than the API (American Petroleum Institute) recommended maximum value of 0.2 mD. The degradation of the cement samples due to exposure to supercritical CO₂ led to a layer of altered material advancing inwards from the sample edges. The Vickers hardness in the altered zone was much higher than that in the unaltered zone, possibly owing to the increase in density and the decrease in porosity due to the carbonation that occurred in the altered zone. Hardness close to the edge within the altered zone was found to have decreased significantly, which is attributed to the conversion of C-S-H into less-strong amorphous silica.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.659-664
• /
• 2012

The present experiment aimed to evaluate the effect of HMBi on the production performance and metabolism in dairy cows. Thirty multiparous Holstein dairy cows under similar conditions were randomly assigned to three dietary treatments; i) Control, a basal diet; ii) T1, a basal diet plus HMBi (0 g prepartum and 18 g postpartum); and iii) T2, a basal diet plus HMBi (10 g prepartum and 18 g postpartum). Treatments were initiated 21 d before expected calving and continued through 91 d postpartum. HMBi was top-dressed onto the total mixed ration of each cow. Treatments did not affect dry matter intake, plasma urea nitrogen, peak milk yield, days to peak milk yield, nonesterified fatty acid, glutamate pyruvate transaminase, glutamic oxalaetic transaminase, milk fat content, milk protein content, milk lactose content, and milk solid non-fat content. The milk composition yields were increased by the HMBi-supplemented treatment. The T1 and T2 treatments increased the yields of 4% fat-corrected milk yield, milk fat, milk protein, and milk lactose compared with the control. Although there was no difference in the milk composition of the control and T2-treated cows, the T2-treated cows exhibited higher milk fat yield (increased by 74 g/d), lower milk urea nitrogen (reduced by 3.41%), and plasma ${\beta}$-hydroxy butyrate than the control cows. The results indicate that HMBi supplementation to diet has beneficial effects, and that there is no difference between supplementation at prepartum and starting only at parturition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.213-220
• /
• 2004

The purpose of this experiment was to investigate the effect of the diets supplemented with lard or prilled fat ($Carolac^{(R)}$) on lactation performance, plasma constituents and ruminal characteristics of Holstein cows under a warm climate. In trial 1, 18 Holstein cows, 14 primiparas at 43 DIM and 4 multiparas at 55 DIM, were randomly assigned into six $3{\times3}$ Latin squares, in which three dietary treatments were isoproteinous but varying in energy contents and three 21 d periods. The treatments were basal diet (Control), basal diet supplemented with 2.5% lard (LD), and basal diet supplemented with 2.5% commercial Prilled fat (PF). In trial 2, three rumen canulated pregnant nonlactating Holstein cows with 550 kg average body weight were allotted into a $3{\times}3$ Latin square design with diets same as in trial 1 were fed to the cows at the level of 1.5% body weight on dry matter (DM) basis. The results indicated that the DM intake did not differ among the treatments. Milk yield and 4% FCM yield were greater (p<0.05) in PF than in Control. LD and PF resulted in greater milk fat percentage. Protein, lactose and solid contents in milk were not different among the three dietary treatments. The concentration of nonesterified fatty acids (NEFA) in plasma was significantly greater in LD and PF than that in Control. However, the concentrations of triglycerides, urea nitrogen, and cholesterol in plasma were not significantly different among the three treatments. Although the ruminal molar percentage of isobutyrate in LD and PF was greater, no significant difference was observed in ruminal pH, NH3-N concentration and VFA production among the three treatments. Diet supplemented with fat can improve milk yield and milk fat percentage without resulting in disadvantages of ruminal characteristics in cows at early lactation and under warm climate.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7473-7478
• /
• 2015

Background: Kermanshahi oil is one the most favorable oils in Iran especially in Kermanshah province. We aimed to evaluate the role of usual intake of Kermanshahi oil and other kinds of dietary fats as well as different meats, vegetables and fruits, carbohydrates, cereals, grains, sweets, candy and lifestyle habits in risk of breast cancer. Materials and Methods: A case-control study with 47 consecutive, newly diagnosed premenopausal breast-cancer patients and 105 age and socioeconomic matched healthy women was conducted from 2013-2014 in Imam Reza hospital of Kermanshah using a standardized, validated questionnaire assessing various anthropometric, socio-demographic, lifestyle and dietary characteristics. Results: Kermanshahi oil intake was associated with a 2.1-fold (OR=2.123, 95% CI 1.332-3.38) (p=0.002) higher likelihood of having breast cancer, while daily intake of other solid animal fats also increased the likelihood by 2.8-fold (OR = 2.754, 95% CI 1.43-5.273) (p < 0.001), after various adjustments made. Lack of fish oil, white meat, vegetables, soy products, nuts and dairy products (especially during adolescence) in daily regimens and lack of sun exposure were significantly associated with premenopausal breast cancer risk in this region. Conclusions: This study suggested that animal fat increases the risk of premenopausal breast cancer but many other dietary and non-dietary factors including calcium and vitamin D deficiency are consistently associated with increased odds of breast cancer in this region.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.18-19
• /
• 2006

In this study, dielectric properties of the ${Mg_5}{B_4}{O_{15}}$ (B=Ta, Nb) cation-deficient perovskite ceramics and its oscillator application are investigated. The cation-deficient perovskite ceramics are prepared through the solid-state route. According to the XRD pattern, ${Mg_4}{Ta_2}{O_9}$ and $Mg{Ta_2}{O_6}$ phase existed in calcined and sintered ${Mg_5}{Ta_4}{O_15}$ powder. Also ${Mg_5}{Ta_4}{O_{15}}$ phase added with increasing sintering temperature. In the case of calcined and sintered ${Mg_5}{Nb_4}{O_{15}}$ powder, single phase of ${Mg_5}{Nb_4}{O_{15}}$ is appeared. In the case of the ${Mg_5}{Ta_4}{O_{15}}$ and ${Mg_5}{Nb_4}{O_{15}}$ ceramics sintered at $1450^{\circ}C$ for 5h, the dielectric constant, quality factor, and temperature coefficient of the resonant frequency (TCRF) were 8.2, 259,473 GHz, $-10.91ppm/^{\circ}C$ and 14, 37,350 GHz, $-52.3\;ppm/^{\circ}C$, respectively. Simulated DR with ${Mg_5}{Ta_4}{O_{15}}$ ceramics had the operating frequency of 10.99 GHz and S(2,1) of -29.795 dB. Size of manufactured oscillator was $56{\times}48{\times}34\;mm^3 and operated at 11.93 GHz. Power output and second harmonic of oscillator were +13.61 dBm and -23.81 dBc at 23.85 GHz, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.39-49
• /
• 2007

In this study, the performance characteristics of solid phase microextraction (SPME) were investigated for three major odorous groups that consist of 10 individual compounds ([1] volatile organic compounds (VOC): benzene, toluene, p-xylene and styrene, [2] reduced sulfur compounds (RSC): hydrogen sulfide, methyl mercaptan, dimethylsulfide (DMS), dimethyldisulfide (DMDS), and carbon disulfide, and [3] amine: trimethylamine (TMA)). For the purpose of a comparative analysis, two types of SPME fiber ([1] polidimethylsiloxane/divinilbenzene (P/D) and [2] $Carboxen^{TM}$/polidimethylsiloxane (C/P)) were test ε d against each other for a series of standards prepared at different concentration levels (100, 200, and 500 ppb). To compare the analytical performance of each fiber, all standards were analyzed for the acquisition of calibration data sets for each compound. The results of P/D fiber generally showed that its calibration slope increased as a function of molecular weight across different VOCs; however, those of C/P fiber showed a fairly reversed trend. Besides, we confirmed that the application of SPME is limited to many sulfur compounds; only two compounds (DMS and DMDS) are sensitive enough to draw calibration results out of SPME. The calibration data for RSC show generally enhanced slop values for C/P relative to P/D fiber. However, in the case of TMA, we were not able to find a notable difference in their performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.236.2-236.2
• /
• 2014

세계 반도체 시장은 컴퓨터 기능이 더해진 모바일 기기의 수요가 증가함에 따라 메모리반도체의 시장규모가 최근 빠른 속도로 증가했다. 특히 모바일 기기에서 저장장치 역할을 하는 비휘발성 반도체인 NAND Flash Memory는 스마트폰 및 태블릿PC 등 휴대용 기기의 수요 증가, SSD (Solid State Drive)를 탑재한 PC의 수요 확대, 서버용 SSD시장의 활성화 등으로 연평균 18.9%의 성장을 보이고 있다. 이러한 경제적인 배경 속에서 NAND Flash 미세공정 기술의 마지막 단계로 여겨지는 1Xnm 공정이 개발되었다. 그러나 1Xnm Flash Memory의 생산은 새로운 제조설비 구축과 차세대 공정 기술의 적용으로 제조비용이 상승하는 단점이 있다. 이에 따라 제조공정기술을 미세화하지 않고 기존의 수평적 셀구조에서 수직적 셀구조로 설계 구조를 다양화하는 기술이 대두되고 있는데 이 중 Flash Memory의 대용량화와 수명 향상을 동시에 추구할 수 있는 3D NAND 기술이 주목을 받게 되면서 공정기술의 변화도 함께 대두되고 있다. 3D NAND 기술은 기존라인에서 전환하는데 드는 비용이 크지 않으며, 노광장비의 중요도가 축소되는 반면, 증착(Chemical Vapor Deposition) 및 식각공정(Etching)의 기술적 난이도와 스텝수가 증가한다. 이 중 V-NAND 3D 기술에서 사용하는 박막증착 공정의 경우 산화막과 질화막을 번갈아 증착하여 30layer 이상을 하나의 챔버 내에서 연속으로 증착한다. 다층막 증착 공정이 비정상적으로 진행되었을 경우, V-NAND Flash Memory를 제조하기 위한 후속공정에 영향을 미쳐 웨이퍼를 폐기해야 하는 손실을 초래할 수 있다. 본 연구에서는 V-NAND 다층막 증착공정 중에 다층막의 두께를 가상 계측하는 알고리즘을 개발하고자 하였다. 증착공정이 진행될수록 박막의 두께는 증가하여 커패시터 관점에서 변화가 생겨 RF 신호의 진폭과 위상의 변화가 생긴다는 점을 착안하여 증착 공정 중 PECVD 장비 RF matcher와 heater에서 RF 신호의 진폭과 위상을 실시간으로 측정하여 데이터를 수집하고, 박막의 두께와의 상관성을 분석하였다. 이 연구 결과를 토대로 V-NAND Flash memory 제조 품질향상 및 웨이퍼 손실 최소화를 실현하여 제조 시스템을 효율적으로 운영할 수 있는 효과를 기대할 수 있다.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.1
• /
• pp.41-51
• /
• 2018

In case of evaluating the bond stress of a void deck plate using a wire steel, there is no standard formula considering both the influence on the void and the type of the reinforcing bar. Therefore we proposed a model equation considered the bond characteristics of the void deck plate. A total of 46 specimens was carried out a direct pull-out test and the test variables were the presence of a void body, type of reinforcing bar, the inner cover thickness according to the location of reinforcing bars and bond region. As a result of the comparison between the steel bar and steel wire, the bond stress of the steel wire with the relative rib area of 0.071 is 4.5 ~ 28.58% lower than that of the steel bar with 0.092 and the bond stress reduction rate increases when the inner cover thickness is insufficient. In the case of the inner cover thickness of $1.7d_b$ and $2.7d_b$, the bond stress was reduced to 48.7 ~ 68.4%. In the inner cover thickness was $4.9d_b$ and $5.2d_b$, the bond stresses were equivalent to those of the solid specimens. It was confirmed that the average bond stress and strain were affected by the inner cover thickness. Therefore the predicted model for one module of the void deck plate is proposed and verified by considering the bond characteristics of the void deck plate.

• Korean Journal of Plant Resources
• /
• v.29 no.5
• /
• pp.598-603
• /
• 2016

The aim of this study was to elucidate the influence of vigor of a bearing shoot in ‘Bluecrop’ Highbush Blueberry (Vaccinium corymbosum L.) on growth characteristics of shoots and fruits. Bearing shoots were classified with BS (bearing shoot) and BMB (bearing mother branch). The vigor of bearing shoots were divided into four arbitrary categories; A was thin (< 6.0 ㎜) BMB and short (< 10 ㎝) BS, B was thin BMB and long (≥ 10 ㎝) BS, C was thick (≥ 6 ㎜) BMB and short BS and D was thick BMB and long BS. Shoots from D were longer (6.5 ㎝) and thicker (1.70 ㎜) than those from the others. Shoots of D had more leaves (5.8 ea) than those of the others. Leaf area of D was larger (13.5 ㎠) than those of the others. The first harvest of D was one week faster than the others. Ratio of big berry (>14 ㎜) from the long BSs was higher (B : 41.7, D : 46.8%) than that from the short BSs. Soluble solid content of small berrys did not show any different according to vigor of bearing shoots, but soluble solid content of big berrys of the long BSs was higher (B : 16.2, D : 15.6°Bx) than those of the short BSs. The thickness of BMB did not affect ratio of fruit size and soluble soild content. The long BSs would be proper than the short BSs for bearing bigger fruits.