• Structural Engineering and Mechanics
• /
• v.5 no.6
• /
• pp.743-754
• /
• 1997

A three-dimensional constitutive modeling for reinforced concrete is presented for finite element nonlinear analysis of reinforced concrete. The targets of interest to the authors are columns confined by lateral steel hoops, RC thin shells subjected to combined in-plane and out-of-plane actions and massive structures of three-dimensional (3D) extent in shear. The elasto-plastic and continuum fracture law is applied to pre-cracked solid concrete. For post cracking formulation, fixed multi-directional smeared crack model is adopted for RC domains of 3D geometry subjected to monotonic and reversed cyclic actions. The authors propose a new scheme of decomposing stress strain fields into sub-planes on which 2D constitutive laws can be applied. The proposed model for 3D reinforced concrete is experimentally verified in both member and structural levels under cyclic actions.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.6
• /
• pp.779-786
• /
• 1998

A reversed-phase high-performance liquid chromatogrphy (RP-HPLC) has been developed to analyze the metabolites of arachidonic acid based on the specificities of ultraviolet absorption of these various metabolites and is sensitive to the nanogram level. This procedure makes it possible to extract complex mixtures of eicosanoids efficiently with a single step and to analyze them simultaneously by RP-HPLC from biological samples using octadesylsilyl silica extraction column and $PGB_2$ as an internal standard. The cyclooxygenase products {prostaglandin $(PG)D_2,\;PGE_1,\;PGE_2,\;PGF_{1{\alpha}},\;PGF{2{\alpha}},\;6-keto-PGF_{1{\alpha}},$ and thromboxane $B_2(TXB_2)}$ and lipid peroxidation product, isoprostanes, of arachidonic acid were monitored by one isocratic HPLC system at 195 nm wavelength. The lipoxygenase products ${leukotriene(LT)B_4,\;LTC_4,\;LTD_4,$ and 5-hydroxyeicosatetraenoic acid (5-HETE), 12-HETE, 15-HETE} were measured by another isocratic HPLC system at 280 nm for LTs and 235 nm for HETEs. This method provides a simple and reliable way to extract and assess quantitatively the final arachidonic acid metabolites.

• Journal of Industrial Technology
• /
• v.39 no.1
• /
• pp.21-25
• /
• 2019

This work experimentally determined the effect of microaerobic condition on anaerobic digestion of thickened waste activated sludge in semi-continuous mesophilic digesters at hydraulic retention time of 20 days. The concentration of hydrogen sulfide was $7{\pm}2ppm$ at the microaerobic condition and $14{\pm}2ppm$ at the anaerobic condition. Removal efficiency of volatile solid was not significantly different between microaerobic ($40{\pm}8%$) and anaerobic ($38{\pm}8%$) conditions. There was no important difference between microaerobic ($1,352{\pm}98ml/d$) and anaerobic ($1,362{\pm}104ml/d$) conditions in the biogas production, either. Therefore, it could be concluded that the application of the microaerobic condition was an efficient method of the hydrogen sulfide removal from the biogas.

• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.75-80
• /
• 2012

Due to the effect of surface tension, liquid film around a curved edge of solid surface moves from the corner to the flat surface. During this behavior of liquid film, film sagging phenomenon is easily occurred at the solid surface. Behavior of liquid film is determined with the effects of the properties of liquid film and the geometric factors of solid surface. In the present study, 2-D transient CFD simulations were conducted on the behavior of liquid film around a curved edge. The two-phase interfacial flow of liquid film was numerically investigated by using a VOF method in order to predict the film sagging around a curved edge. In the steady state of behavior of liquid film, the liquid film thickness of numerical result showed a good agreement with experimental data. After verifying the numerical results, the characteristics of behavior of liquid film were numerically analyzed with various properties of liquid film such as surface tension coefficient and viscosity. The effects of geometric factors on film sagging were also investigated to reduce the film sagging around a curved edge.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.1-21
• /
• 1998

In this paper, a non-conforming 3-D 8-node solid element(MQM10) has beets applied to the analyses of static and dynamic bending problems of laminated composite plates The QM10 element exhibits stiffer bending stiffness which is caused by the reduction of degree of freedom from Q11 element. As an effective way to correct the relative stiffness stiffening phenomenon the modification of Gauss sampling points for composite plates is proposed. The quantity of modification is a function of material properties. Also, another two modified equations are obtained, one is modification for stress, and the other is modification of coefficient of shear modulus in free vibration. It is noted that MQM10 element can analyse the static and free vibration problems of various 3-dimensional composite plates composed of unidirectional laminae, woven laminae or braided laminae. The results of MQM10 element are in good agreement with those of 20-node element.

• Mass Spectrometry Letters
• /
• v.5 no.4
• /
• pp.115-119
• /
• 2014

The Brazil nut (Bertholletia excelsa - Lecythidaceae) is considered a product with high economic value, being a food widely appreciated for its nutritional qualities. Although previous studies have reported the biochemical composition of Brazil nut oil, the knowledge regarding the phospholipid composition exhibits a disagreement: the composition of fatty acids present in the structures of phospholipids is reported as being different from the composition of the free fatty acids present in the oil. In this work, solid phase extraction (SPE) was employed to provide a fast extraction of the phospholipids from Brazil nuts, in order to compare the phospholipid profile of the in nature nuts and their fatty acids precursor present in the oil. The major phospholipids were characterized by mass spectrometry approach. Their fragmentation pattern through direct infusion electrospray ionization ion-trap tandem mass spectrometry ($ESI-IT-MS^2$) proved to be useful to unequivocal characterization of these substances. High resolution (HR) experiments through ESI using a quadruple time of flight mass spectrometry (QTOF) system were performed to reinforce the identifications.

• New & Renewable Energy
• /
• v.16 no.2
• /
• pp.47-53
• /
• 2020

The amount of food waste and its water content depends on both the season and region. In particular, the water content typically varies between 73.8 wt.% and 83.3 wt.%, depending on the proportion of vegetables. Current food waste drying technologies are capable of reducing the water content to less than 10 wt.%, while increasing the heating value. Ongoing studies aim to utilize dried food waste as fuel. Food waste can be used to produce solid refuse fuel (SRF) by mixing it with various solid fuels or other types of waste. The analysis of specimens is very important when considering the direct combustion of food waste or its co-firing with solid fuels. In this study, the weight reduction of specimens after burning them in a small combustor, and compared with the results of thermogravimetric analysis (TGA). The concentration of various chemicals was also measured to define the characteristics of waste generation. Performed proximate analysis, elemental analysis, TGA, combustion experiment, the heating value, and derivative thermogravimetry (DTG).

• Archives of Pharmacal Research
• /
• v.26 no.12
• /
• pp.1096-1101
• /
• 2003

To enhance the liver targeting and reduce the side effects of 5-fluorouracil (5-Fu), it was acylated by stearyl chloride to obtain .$\b{N}_{\b{1}}$stearyl-5-Fu (5-FuS). The chemical structure of the prodrug was confirmed by Nuclear Magnetic Resonance and Infrared Spectrometry. 5-FuS was incorporated into solid lipid nanoparticles (SLN), which were prepared by the physical agglomeration method. The mean diameter of 5-FuS-SLN was 240.19 nm and the drug loading was 20.53%. The release characteristics in vitro of 5-FuS-SLN were fitted to the first-order pharmacokinetic model. Compared with 5-Fu injection, a study on the distribution of 5-FuS-SLN in mice showed that 5-FuS-SLN could double 5-Fu concentration in mice livers. The main pharmacokinetic parameters of 5-FuS-SLN in rabbits is shown as follows: $V_d$=0.04336L/kg, $T_{1/2} \beta$=1.2834h, CL=0.1632 L/h. In conclusion, 5-FuS-SLN has significant liver targeting properties. The employment of a prodrug to enhance drug liposoluble properties and the preparation method presented in this paper, seem to be an alternative strategy to the traditional colloidal delivery system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.6
• /
• pp.42-53
• /
• 2015

In this study, the influence of Al particle size, as an additive for solid propellant, on the mechanical erosion of the carbon-composite nozzle was evaluated. A new model which can predict the size and distribution of the agglomerated reaction product($Al(l)/Al_2O_3(l)$) was established, and the size of agglomerate were calculated according to the various initial size of Al in the solid propellant. With predicted results of the model, subsequently, the characteristics of mechanical erosion on the carbon-composite nozzle was estimated using a commercial CFD software, STAR CCM+. The result shows that the smaller the initial Al particles are, in the solid propellant, the lower is the mechanical erosion rate of the composite nozzle wall, especially for the nano-size Al particle.

• KSBB Journal
• /
• v.8 no.4
• /
• pp.382-389
• /
• 1993

In order to elucidate the effect of acetate ion on the growth of Escherichia coli, flask and fermentor cultures were performed using M9 and LB media. Acetic acid was secreted at a higher rate under the conditions of high glucose concentration as well as of richer medium, i. e., LB broth. The pH in flask culture could not be controlled as i fermentor and pH decreased with the formation of acetic acid. The inhibition effect of acetic acid was pronounced at a lower pH, and the effective inhibitory concentrations of acetic acid were 2.0g/l for LB flask culture, 4.0g/l for M9 flask culture, and 8.0g/l for M9 fermentor culture. Dialysis flask culture was designed to slowly provide E coli cells with glucose. Solid LB agar was layered under LB liquid medium with the variation of agar concentration and solid volume, The increase in the solid portion in the total volume(agar＋liquid) resulted in the increase of the final cell concentration. This can be ascribed to the fact that the larger solid phase behaves like a larger reservoir for glucose and controls the growth of E. coli with a controlled rate.