• Journal of Hydrogen and New Energy
• /
• v.31 no.4
• /
• pp.395-403
• /
• 2020

In this paper, the performance characteristics of the impeller and volute in the 2 vane pump were investigated using response surface method (RSM) with commercial computation fluid dynamics (CFD) code. Design variables were defined with the impeller blade angle and volute area distribution. The objective functions were defined as the total head, total efficiency and solid material size of the 2 vane pump. The design optimization of the design variables was determined using the RSM. The numerical results for the reference and optimum models were compared and discussed in this work.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.5
• /
• pp.335-339
• /
• 1998

The factors affecting the isolation and culture of the protoplast of embryogenic callus, derived from immature ovule in Citrus junos, were examined. An incubation time in enzyme solution of 16 hrs was preferable for protoplast isolation. Efficient protoplast yields were obtained from the treatment of equal concentration of 0.7 M $\textrm{BH}_{3}$ to the enzyme solution containing 1.0% cellulase, 1.0% macerozyme and 0.2% pectolyase. Protoplast cultured in MT medium with 0.1 mg/L 2,4-D showed vigorous division and some of them formed callus. Induced callus was subcultured on solid MT medium but the callus showed very slow growth. The above results show the possibility to culture from protoplast fusion in Citrus genera.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.337-341
• /
• 2019

In this study, the effects of two materials, active alumina and CaO based inorganic binder, which cause the side reaction on the K₂CO₃-based solid CO₂ sorbents was investigated. K₂CO₃-based solid sorbents called KAM series was prepared by spray drying method and then measured its physical properties and CO₂ sorption capacity. Among the KAM series sorbents, KAM(0.5) maintained high CO₂ sorption capacity of 7.6 wt% after 3 cycle of sorption/regeneration reaction and showed very low attrition loss as low as 3.1 % which was measured by ASTM D5757-95.

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1135-1143
• /
• 2002

The intermittent spray characteristics of the single-hole diesel nozzle (d$\sub$n/=0.32 mm) used in the fuel injection system of heavy-duty diesel engines were experimentally investigated. The mean velocity and turbulent characteristics of the diesel spray injected intermittently into the still ambient were measured by using a 2-D PDPA (phase Doppler particle analyzer) . The gradient of spray half-width linearly increased with time from the start of injection, and it approximated to 0.04 at the end of the injection. The axial mean velocity of the fuel spray measured along the radial direction was similar to that of the free air jet within R/b= 1.0-1.5 regardless of elapsing time, and its non-dimensional distribution corresponds to the theoretical velocity distributions suggested by Hinze in the downstream of the spray flow fields. The turbulent intensity of the axial velocity components measured along the radial direction represented the 20-30% of the U$\sub$cι/ and tended to decrease in the outer region. The turbulent intensity in the trailing edge was higher than that in the leading edge.

• Structural Engineering and Mechanics
• /
• v.61 no.5
• /
• pp.563-576
• /
• 2017

This paper is a continuation of the investigations started in the paper by Akbarov, S.D., Guliyev, H.H and Yahnioglu, N. (2016) "Natural vibration of the three-layered solid sphere with middle layer made of FGM: three-dimensional approach", Structural Engineering and Mechanics, 57(2), 239-263, to the case where the three-layered sphere is a hollow one. Three-dimensional exact field equations of elastodynamics are employed for investigation and the discrete-analytical method is employed for solution of the corresponding eigenvalue problem. The FGM is modelled as inhomogeneous for which the modulus of elasticity, Poison's ratio and density vary continuously through the inward radial direction according to power law distribution. Numerical results on the natural frequencies are presented and discussed. These results are also compared with the corresponding ones obtained in the previous paper by the authors. In particular, it is established that for certain harmonics and for roots of certain order, the values of the natural frequency obtained for the hollow sphere can be greater (or less) than those obtained for the solid sphere.

• Plant Resources
• /
• v.6 no.2
• /
• pp.153-158
• /
• 2003

Effects of shaking, medium consistency and anther density on polyhaploid production in two wheat cultivars, Pavon and Chris, were studied using a modified 85D12 medium. Pavon produced more calli in shaking and more albino plants tban Chris. However, Chris produced threefold more green plants than Pavon in non-shaking treatment. More calli and green plants were derived from non-shaking treatment than those from shaking treatment. Anthers were cultured on both liquid and semi-solid 85D12 media, using two anther densities, 48 and 96 anthers per plate. Although Pavon generally produced more calli and albino plants than Chris, Chris produced more green plants than Pavon. More green plants were derived from semi-solid medium than those from liquid medium. A factor that may affect plant regeneration from anthers is the length of time on initiation medium. Most of the calli for both genotypes were transferred during the first two time periods. Fertility, as measured by seed set, was determined for all surviving regenerated plants. About 24% of Chris and Pavon anther-derived green plants in the experiment of medium consistency and anther density produced seed.

• Korean Journal of Materials Research
• /
• v.29 no.5
• /
• pp.304-310
• /
• 2019

Chemical vapor deposition method using $CH_4$ gaseous hydrocarbons is generally used to synthesize large-area graphene. Studies using non-gaseous materials such as ethanol, hexane and camphor have occasionally been conducted. In this study, large-area graphene is synthesized via chemical vapor deposition using polyethylene as a carbon precursor. In particular, we used a poly glove, which is made of low-density polyethylene. The characteristics of the synthesized graphene as functions of the growth time of graphene and the temperature for vaporizing polyethylene are evaluated by optical microscopy and Raman spectroscopy. When the polyethylene vaporizing temperature is over $150^{\circ}C$, large-area graphene with excellent quality is synthesized. Raman spectroscopy shows that the D peak intensity increased and the 2D peak intensity decreased with increasing growth time. The reason for this is that sp3 bonds in the graphene can form when the correct amount of carbon source is supplied. The quality of the graphene synthesized using polyethylene is similar to that of graphene synthesized using methane gas.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.1
• /
• pp.84-91
• /
• 2013

Ultrasonic flip-chip bonding needs a precise bonding tool which delivers ultrasonic energy into chip bumps effectively to use the selected resonance mode and frequency of the horn structure. The bonding tool is excited at the resonance frequency and the input and output ports should locate at the anti-nodal points of the resonance mode. In this study, we propose new design method with topology optimization for ultrasonic bonding tools. The SIMP(solid isotropic material with penalization) method is used to formulate topology optimization and OC(optimal criteria) algorithm is adopted for the update scheme. MAC(modal assurance criterion) tracking is used for the target frequency and mode. We fabricate two prototypes of ultrasonic tools which are based on 3D optimization models after reviewing 2D and 3D topology optimization results. The prototypes are satisfied with the ultrasonic frequency and vibration amplitude as the ultrasonic bonding tools.

• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.28-33
• /
• 2013

This paper proposes a miniaturized high-isolation diversity antenna for wearable wireless body area network (WBAN) applications. An inverted-F type radiating element is used to reduce the overall dimension of the proposed antenna to $30mm{\times}30mm{\times}2.5mm$. The antenna performance on the human body phantom is analyzed through simulation and the performance of the fabricated antenna is verified by comparing the measured data with that of the simulation when the antenna is placed on a semi-solid flat phantom with equivalent electrical properties of a human body. The fabricated antenna has a 10 dB return loss bandwidth over the Industrial Scientific Medical (ISM) band from 2.35 GHz to 2.71 GHz and isolation is higher than 28 dB at 2.45 GHz. The measured peak gain of antenna elements # 1 and # 2 is -0.43 dBi and -0.54 dBi, respectively. Performance parameters are analyzed, including envelope correlation coefficient (ECC), mean effective gain (MEG), and the MEG ratio. In addition, the specific absorption ratio (SAR) distributions of the proposed antenna are measured for consideration in use.

• Annual Conference of KIPS
• /
• 2000.10a
• /
• pp.223-226
• /
• 2000

최근 컴퓨터의 대중화와 인터넷환경의 구축으로 인하여 웹기반 코스웨어들의 필요가 급속히 늘고 있다. 그러나 수학 교과의 입체도형 편에 있어서는 웹기반 3D 코스웨어들의 개발은 부진한 편이다. 기존의 코스웨어들은 저작도구를 활용한 2D 위주였고, 최근 연구되어진 3D 코스웨어들은 상호작용이 부족하여 다양한 학습자의 욕구를 충족시키지 못하고 있다. 따라서 본 연구에서는 3D 입체도형의 학습과 학습자의 자극에 반응하는 상호작용적 체험학습이 되도록 VRML 과 JAVA를 이용하여 구현하였다.