• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.4
• /
• pp.237-244
• /
• 2001

Investigation on the surface charge properties of some Korean arable soils was performed by ion adsorption technique with two kinds of indifferent ion ($Na^+$ and $K^+$) at the range of pH 3 to 9 in bulk solution. The contribution of soil components(organic matter, oxides and clay mineral) on the surface charge density was determined at two soil depth with different solid particle composition When the pH of solution increased, the negative charge of soil surface was increased among the all soils, but positive charge were not appeared above pH 6. apparently. The magnitude of surface charge density measured by NaCl adsorption method showed ra nges of $0.01{\sim}2.84cmol_c{\cdot}kg^{-1}$ and $7.41{\sim}12.20cmol_c{\cdot}kg^{-1}$ at pH 3 and pH 9, respectively. Ion adsorption method using KCl as index ion overestimated than the method using NaCl as index ion. The content of organic matter is the strongest factor on the value of dCEC/dpH.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.835-841
• /
• 2013

Modern solid-state gyroscopes (HRG) with hemispherical resonators from high-purity quartz glass and special surface superfinishing and ultrathin gold coating become the best instruments for precise-grade inertial reference units (IRU) targeting long-term space missions. Designing of these sensors could be a notable contribution into development of Korea as a space nation. In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task. Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator's intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, "resonant sizes"), when intensive losses of energy occurs. The authors proposed to use the length of stem's fixture as an additional design parameter to avoid such cases. So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM's discrete mesh. The optimum length and dangerous "resonant lengths" have been found. The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its "dynamical Pole", i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short "beams" (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh's functions of the $1^{st}$ and $2^{nd}$ kinds. To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.

• Journal of the Korean Institute of Gas
• /
• v.6 no.1 s.17
• /
• pp.38-45
• /
• 2002

Hydrates are solid cryctallines resembling ice in appearance, which are consist of a gas molecule surrounded by a cage of water molecules. Because of containning a large amount of methane, hydrates have been considered as a future energy resource. However, the formation of hydrates in the oil and gas industries has been known as a serious problem for a long time. The formation of hydrate in pipeline is common in seasonally cold or sub-sea environments with low temperatures and high pressures. Especially, hydrate plug formation becomes a real menace to flow assurance in inadequately protected transmission lines. This study was carried out for the purpose of understanding mechanism of hydrate plugging and examining formation conditions of hydrate in high pressure gas pipeline. In this study, we measured hydrate equilibrium conditions under the various flowing conditions with the methane. The results were presented both the plugging tendency and the effect of flowing velocity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.88-89
• /
• 2013

A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

• Plant Biotechnology Reports
• /
• v.2 no.2
• /
• pp.163-169
• /
• 2008

Roots of Ophiorrhiza prostrata D. Don serve as a rich source of camptothecin (CPT), an anticancer drug. Because of the large-scale collection of its roots, the plant has become a threatened species. The present study accomplishes the induction of adventitious roots as a means for the production of CPT as well as for the large-scale propagation of this anticancer drug plant using leaf and internode explants. The biomass yield and CPT content of adventitious roots induced from different explants were compared to roots developed on ex vitro rooted stem cuttings. Adventitious roots were produced on half-strength Murashige and Skoog (MS) medium supplemented with $10.74{\mu}M$ ${\alpha}-naphthaleneacetic$ acid and $2.32{\mu}M$ kinetin at mean fresh weights of 0.753, 0.739 and 0.748 g roots from leaf, internode and shoot, respectively. CPT yield from in vitro derived roots after 50, 80 and 120 days of incubation (0.028, 0.06 and 0.1% dry weight, respectively) was not significantly different from those harvested at the same age from ex vitro rooted (0.03, 0.06 and 0.13%, respectively) stem cuttings. CPT from subcultured roots derived from solid (0.08%) medium was lower than from suspension culture medium (0.12%). Subsequent cultures of the adventitious roots showed a stable production of CPT (0.16%). The yield of CPT from 360-day-old plant-derived roots was 0.19%. Elicitation using methyl jasmonate and acetyl salicylic acid exhibited no enhancement in CPT yield. In vitro propagation through direct shoot regeneration was achieved from the adventitious roots upon transfer to MS medium with $8.87{\mu}M$ $N^6-benzyladenine$ (BA) and $2.46{\mu}M$ indole-3-butyric acid (IBA) with a mean of 21.2 shoots per culture in 50 days. The shoots upon subculture on medium having the same level of BA and IBA underwent rapid proliferation. The shoots transferred to field conditions after in vitro rooting exhibited 95% survival. Adventitious root induction, from leaf and internode explants, enables the feasible production of CPT as well as the large-scale rapid propagation of this species which can safeguard it from extinction.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.60-67
• /
• 2017

In this study, we performed surface modification of biodegradable microcrystalline cellulose (MCC) to use as a filler in polyethylene (PE) composite in food packaging application. We modified MCC surface with (3-trimethoxysilylpropyl)diethylenetriamine (TPDT) silane coupling agent, which has one primary amino group and two secondary amino groups per molecule, to introduce amino groups with a carbon dioxide adsorption capability in MCC. Effects of each of the reaction conditions such as amount of TPDT introduced, swelling time, reaction temperature, and reaction time on surface modification degree of MCC were investigated by changing a variety of above reaction conditions. The amount of TPDT grafted on MCC surface and formation of chemical bonds were confirmed by Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and solid state $^{29}Si$ nuclear magnetic resonance (NMR) spectroscopy. We confirmed increase of grafted amount of TPDT on MCC with increasing reaction time, reaction temperature, and amount of introduced TPDT.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.197-203
• /
• 2018

Biochar is the carbon solid produced through the pyrolysis of a biomass from organic sources such as agricultural waste, animal manure, and sludge under limited or anaerobic conditions. Biochar has the effect of reducing greenhouse gases through the carbon sequestration method; additionally, biochar is known to function as a soil amendment. This experiment was conducted to evaluate the application of biochar on the growth characteristics of Chinese cabbage at Chungnam National University in Daejeon, Korea. The Chinese cabbage was grown for 50 days in a glasshouse in pots. A pruning branch was used to produce the bead and pellet forms of biochar through pyrolysis. The biochar was added to the soil at 0, 2, and 5% by weight. The Chinese cabbage with the 2% treatment of the bead form of biochar had the highest fresh weight ($149.43{\pm}15.92g\;plant^{-1}$) which was increased by 10% compared to the control ($136.91{\pm}31.46g\;plant^{-1}$). Moreover, for the 5% treatment of the bead form of biochar ($60.91{\pm}9.82g\;plant^{-1}$), the growth decreased by 57% compared to the control. As the content of the bead form of biochar increased, the shoot dry weight, leaf number, leaf length and lead width that appeared decreased. An increase in the total organic matter, Avail. $P_2O_5$, Ex. cation and EC was observed when the biochar content was increased. Our results support the application of 2% biochar in the bead form for increased growth of Chinese cabbage.

• Journal of the Korean Society for information Management
• /
• v.23 no.2
• /
• pp.265-285
• /
• 2006

In text categorization a certain level of correctness of labels assigned to training documents is assumed without solid knowledge on that of real-world collections. Our research attempts to explore the quality of pre-assigned subject categories in a real-world collection, and to identify the relationship between the quality of category assignment in training set and text categorization performance. Particularly, we are interested in to what extent the performance can be improved by enhancing the quality (i.e., correctness) of category assignment in training documents. A collection of 1,150 abstracts in computer science is re-classified by an expert group, and divided into 907 training documents and 227 test documents (15 duplicates are removed). The performances of before and after re-classification groups, called Initial set and Recat-1/Recat-2 sets respectively, are compared using a kNN classifier. The average correctness of subject categories in the Initial set is 16%, and the categorization performance with the Initial set shows 17% in $F_1$ value. On the other hand, the Recat-1 set scores $F_1$ value of 61%, which is 3.6 times higher than that of the Initial set.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.1
• /
• pp.104-111
• /
• 2011

In order to assess the performance of co-digester using pig slurry and food waste at the farm scale biogas production facility, the anaerobic facility that adopts the one-stage CSTR of 5 $m^3\;day^{-1}$ input scale was designed and installed under the conditions of the OLR of 2.33 kg $m^3\;day^{-1}$ and HRT of 30 days in an pig farmhouse. Several operation parameters were monitored for assessment of the process performance. The anaerobic facility was operated in three stages to compare the performance of the anaerobic co-digester. In the Stage I, that was fed with a mix of pig slurry to food waste ratio of 7:3 in the input volume, where input TS content was 4.7 (${\pm}0.8$) %, and OLR was 0.837-1.668 kg-VS $m^3\;day^{-1}$. An average biogas yield observed was 252 $Nm^3\;day^{-1}$ with methane content 67.9%. This facility was capable of producing an electricity of 626 kWh $day^{-1}$ and a heat recovery of 689 Mcal day-1. In Stage II, that was fed with a mixture of pig slurry and food waste at the ratio of 6:4 in the input volume, where input TS content was 6.9 (${\pm}1.9$) %, and OLR was 1.220-3.524 kg-VS $m^3\;day^{-1}$. The TS content of digestate was increased to 3.0 (${\pm}0.3$) %. In Stage III, that was fed with only pig slurry, input TS content was 3.6 (${\pm}2.0$) %, and OLR was 0.182-2.187 kg-VS $m^3\;day^{-1}$. In stage III, TS and volatile solid contents in the input pig slurry were highly variable, and input VFAs and alkalinity values that affect the performance of anaerobic digester were also more variable and sensitive to the variation of input organic loading during the digester operation. The biogas produced in the stage III, ranged from 11.3 to 170.0 $m^3\;day^{-1}$, which was lower than 222.5-330.2 $m^3\;day^{-1}$ produced in the stage II.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.271-282
• /
• 1982

The browning development, mainly through the Maillard reaction, occurring in the dried fish meat products during storage causes reduction of the nutritional value due to the loss of the essential amino acid such as available lysine as well as off -flavor resulting in the deterioration of the food quality thus shortening the shelflife. In the work, the changes in the amount of available lysine, extractable nitrogenous compounds (nonprotein-N, amino-N, trimethylamine oxide, trimethylamine, and free lysine) and development of browning were measured to assess the relationship between the shelflife and the quality loss in dried filefish under the steady state conditions (35,45, and $55^{\circ}C;a_{w}'s$ of 0.44 0.52, 0.65 and 0.75 at each temperature) and fluctuating temperature condition of $35/55^{\circ}C$ will. alternating 7 day periods at each water activity. The results indicated that the amount of available lysine and extractable nitrogenous compounds except TMA decreased rapidly with increasing temperatures and water activities while the rate of available lysine and extractable nitrogenous compounds must be involved in the initial stage of brown pigment formation. The available lysine loss of the dried filefish products stored under the fluctuating temperature conditions was greater than that stored under its fixed mean temperature, $45^{\circ}C$. The activation energies for lysine loss obtained from the Arrhenius plot ranged 6.9 to 4.4 Kcal/mol and $Q_{10}$ values at $40^{\circ}C$ were 1.4 to 1.2. The values for browning were 15.7 to 14.4 Kcal/mol and 2.2 to 2.0 respectively. Shelf-life, defined as the time to reach 0.15 O. D./g solid or the limit of off-color deterioration by browning reaction, was extented longer than the halflife of Iysine loss, actually corresponding $75\%$ loss of available lysine. This suggested that the halflife of lysine loss might not be adequate to assess the shelf-life of the food system with high potential of protein, nonproteinous nitrogen compounds, and lipids.