• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.547-550
• /
• 2008

A solid rocket motor has quite complex physical condition such exothermal chemical reaction in subsonic area and supersonic ex pansion in a converging-diverging nozzle. To introduce a simulation tool for compressible flow in supersonic range as well as incompressible chemical reaction zone in a whole rocket nozzle is a essential demand. Since the flow vary subsonic to super sonic, the convergence in computation becomes very low and unstable in a whole domain of rocket motor. This paper reports the 2-D Axisymmetric and simple 3-D solid propellant combustion and flow of gases in rocket motor by using a precondi tioning, shear stress turbulence modeling, AUSM(p). To simulate the simplified combustion process, Double base solid propellant is used to calculate reaction of solid propellant.

• 약학회지
• /
• 제37권3호
• /
• pp.216-227
• /
• 1993

Complex formations of practically insoluble antelmintic drugs such as mebendazole (MBZ), albendazole (ABZ) and flubendazole (FBZ) with dimethyl-$\beta$-cyclodextrin (DM-$\beta$-CyD) and 2-hydroxypropyl-$\beta$-cyclodextrin (HP-$\beta$-CyD) together with $\alpha$-, $\beta$- and $\gamma$-cyclodextrins(CyDs) in duffered solutions were investigated by solubility method. $A_{L}$ type phase solubility diagrams were obtained in all cases except for the complexation (B$_{s}$, type) of FBZ with $\gamma$-CyD. The highest stability constants were obtained with DM-$\beta$-CyD, followed by $\alpha$-CyD > $\beta$-CyD > HP-$\beta$-CyD > $\gamma$-CyD for ABZ, and HP-$\beta$-CyD > $\gamma$-CyD > $\beta$-CyD > $\alpha$-CyD for FBZ at pH 1.2. On the other hand, solid dispersion systems of ABZ and FBZ with $\beta$- and DM-$\beta$-CyDs were prepared by solvent evaporation method and evaluated by dissolution, differential thermal analysis and powder x-ray diffractometry. The dissolution rates of ABZ- and FBZ-DM-$\beta$-CyD solid dispersions were much faster than those of drugs alone, corresponding physical mixtures and tablets on market both at pH 1.2 and 6.8. Although dissolution rates of all samples at pH 6.8 were by far lower than those obtained at pH 1.2, as explained by pH-solubility profiles for ABZ and FBZ, the dissolution rates at pH 6.8 of ABZ from $\beta$- and DM-$\beta$-CyD solid dispersions exceeded the respective equilibrium solubility (23.9 $\mu\textrm{g}$/ml). Fast dissolution of ABZ from solid dispersions with CyDs was attributed to the reduction of drug crystallinity and particle size which was supported by DTA and powder x-ray diffractometry. Consequently these results suggest that solid dispersion systems with CyDs may provide useful means to markedly enhance the solubility and dissolution of benzimidazole antelmintic drugs.

• 한국환경과학회지
• /
• 제24권7호
• /
• pp.841-849
• /
• 2015

The solid phase extractant SAN-D2EHPA/TBP containing two extractants of Di-(2-ethylhexyl)phosphoric acid (D2EHPA) and Tri-butyl-phosphate (TBP) was prepared by immobilizing two exractants D2EHPA and TBP in styrene acrylonitrile copolymer (SAN). The prepared SAN-D2EHPA/TBP was characterized by using fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The solid phase extractant SAN-D2EHPA/TBP was tested for the removal of Cu(II) from aqueous solution. Experiments were carried out as a function of the pH and Cu(II) concentration in the aqueous phase. The equilibrium time was 180 min and equilibrium experiment data obeyed the pseudo-second-order kinetic model. The Langmuir isotherm model represented the experiment data as well. The maximum removal capacity of Cu(II) calculated from Langmuir isotherm model was 3.1 mg/g.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.334-342
• /
• 2012

새로 개발된 '고액분리 통합이론'의 핵심 개념인 '케이크 첫 입자층이 받는 압력 $p_d$'의 역할을 인식하기 위해, 고압축성 케이크에 대해 다음과 같은 세 가지 고액분리 분야를 새로운 개념으로 분석하였다. 첫째, 침전된 플럭의 케이크 여과에서 여과 대상이 되는 침전 플럭의 두께 계산에서 $p_d$의 역할과, 케이크의 형성 두께 계산에서의 $p_d$의 역할. 둘째, 압착 과정에서의 $p_d$의 역할, 그리고 마지막으로 간섭침전 결과 쌓이는 높이에 미치는 $p_d$의 역할과 간섭침전 과정에서의 $p_d$의 중요성을 보였다. 이로써 고액분리 통합이론의 적용 가능성과, 그에 있어 $p_d$의 중요성을 밝힐 수 있었다. 이 과정을 통하여 케이크 여과, 압착, 간섭침전의 이론적인 새로운 정의가 가능해졌다.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2015

The solid-phase extractant PS-D2EHPA/TBP was prepared by immobilizing two extractants D2EHPA and TBP in polysulfone (PS). The prepared PS-D2EHPA/TBP was characterized by using fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The removal of Cu(II) from aqueous solution was investigated in batch system. The experiment data were obeyed the pseudo-second-order kinetic model. Equilibrium data were well fitted by Langmuir model and the removal capacity of Cu(II) by solid extractant PS-D2EHPA/TBP obtained from Langmuir model was 3.11 mg/g at 288 K. The removal capacity of Cu(II) was increased according to increasing pH from 2 to 6, but the removal capacity was decreased below pH 3 remarkably.

• Archives of Pharmacal Research
• /
• 제27권4호
• /
• pp.371-375
• /
• 2004

The silicon linker is the foremost traceless linker used in solid-phase reactions. Hydrogen fluo-ride (HF) or trifluoroacetic aicd (TFA) can remove the silicon linker with the silicon atom being replaced by a hydrogen atom. In this experiment, the linkers 1c and 2d, which are the most useful in solid-phase reactions, were synthesized, Linker 1c is composed of seven linearly linked carbons and linker 2d includes an oxygen atom in the linear carbon chain to increase the solvation capacity. The carboxylic acid component of linker 1c and 2d forms an amide or ester bond with resin. The synthesized linkers 1c and 2d could be utilized in constructing a chemical compound library that includes indole, benzodiazepine and phenothiazine (aromatic ring compounds).

• 전기화학회지
• /
• 제22권3호
• /
• pp.87-103
• /
• 2019

현재 상용화되어 있는 리튬이온전지에 사용하고 있는 비수계 유기 전해액은 가연성, 부식성, 고휘발성, 열적 불안정성 등의 단점 때문에 더욱 안전하고 장수명을 보이는 고체 전해질로 대체하는 연구가 진행되고 있으며, 이것은 전기자동차 및 에너지저장 시스템과 같은 중대형 이차전지에도 효율적으로 활용될 수 있다. 다양한 형태의 고체 전해질 중에서 현재 고분자 매트릭스에 활성 무기 충진재가 포함되어 있는 복합 고체 전해질이 고이온전도도와 전극과의 탁월한 계면접촉을 이루는데 가장 유리한 것으로 알려졌다. 본 총설에서는 우선 고체 전해질의 종류와 연혁에 관해 간단히 소개하고, 고분자 및 무기 충진재 (불활성 및 활성)로 구성되는 고체 고분자 전해질 및 무기 고체 전해질의 기본적 물성 및 전기화학적 특성을 개괄한다. 또한 이 소재들의 형상을 기준으로 입자형 (0D), 섬유형 (1D), 평판형 (2D), 입체형 (3D)의 형식으로 구성된 복합고체 전해질과 이에 따른 전고체 전지의 전기화학적 특성을 논의한다. 특히 리튬금속 음전극을 사용하는 전고체 전지에 있어서 양전극-전해질 계면, 음전극-전해질 계면, 입자간 계면의 특성에 관해 소개하고, 마지막으로 현재까지 보고된 관련 총설들을 참조하여 복합 고체 전해질 기술의 현재 요구조건 및 미래 전망을 알아본다.

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1157-1163
• /
• 2014

The solid phase extractant (PVC-D2EHPA bead) was prepared by immobilizing di-2-ethylhexyl-phosphoric acid (D2EHPA) with polyvinyl chloride (PVC). The prepared PVC-D2EHPA beads were characterized by using fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The removal experiments of Cu(II) by PVC-D2EHPA beads conducted batchwise. The removal kinetics of Cu(II) was found to follow the pseudo-second-order model. The equilibrium data fitted well with Langmuir isotherm model and the maximum removal capacity was 2.6 mg/g at $20^{\circ}C$. The optimum pH region was in the range of 3.5 to 6. and the standard free energy (${\Delta}G^{\circ}$) was between -4.67~-4.98 kJ/mol, indicating the spontaneous nature of Cu(II) removal by PVC-D2EHPA beads.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.82-91
• /
• 1997

The major objective of this study is to establish analytical technique in order to analyze the behaviour of semi-solid material considering induction heating of the billet. Induction heating process is analyzed by using commerical finite element software. ANSYS. The finite element program, SFAC2D, for the simulation of deformation in semi-solid state is developed in the present study. The semi-solid behaviour is described by a viscoplastic model for the solid phase, and by the Darcy's law for the liquid flow. Simple compression and closed-die compression process considering induction heating are analyzed, and also it is found that the distribution of initial solid fraction of the billet has an important effect on deformation behaviour of semi-solid material. In order to verify the effectiveness of proposed analytical technique the simulation result is compared with experimental result.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4109-4116
• /
• 2012

An efficient solid-phase methodology has been developed for the synthesis of 2-amino and 2-amidobenzo[d]-oxazole derivatives. The key step in this procedure involves the preparation of polymer-bound 2-aminobenzo-[d]oxazole resins 4 by cyclization reaction of 2-hydroxy-phenylthiourea resin 3. The resin-bound 2-hydroxyphenylthiourea 3 is produced by the addition of 2-aminophenol to the isothiocyanate-terminated resin 2 and serve as a key intermediate for the linker resin. This core skeleton 2-aminobenzo[d]oxazole resin 4 undergoes functionalization reaction with various electrophiles, such as alkylhalides and acid chlorides to generate 2-amino and 2-amidobenzo[d]oxazole resins 5 and 6 respectively. Finally, 2-amino and 2-amidobenzo[d]oxazole derivatives 7 and 8 are then generated in good yields and purities by cleavage of the respective resins 5 and 6 under trifluoroacetic acid (TFA) in dichloromethane ($CH_2Cl_2$).