• 전자공학회논문지SC
• /
• 제42권5호
• /
• pp.51-58
• /
• 2005

본 논문에서는 유방 초음파 볼륨영상에서 진단하고자 하는 종양 영역을 율왜곡 기반(rate-distortion based) 시드영역 확장 법으로 분할하는 알고리듬을 제안한다. 제안된 분할법에서는 율은 윤곽의 거친 정도를 나타내고 왜곡은 영역의 동질성 정도를 나타내는데, 흉부 종양 볼륨으로부터 획득한 2차원 단면 영상에서 설정된 초기 시드영역에서 시작하여 이러한 율과 왜곡을 동시에 최소화하는 주위영역 중 하나씩 시드영역으로 병합한다. 이러한 병합은 시드영역의 윤곽 화소당 평균 율왜곡 비용이 최대가 될 때까지 반복적으로 수행한다. 이렇게 함으로써 최종 시드영역은 동질성이 잘 유지되고 부드러운 윤곽을 갖게 된다. 마지막으로 모든 단면 영상에 있는 최종 시드영역의 윤곽들을 이용하여 3차원 흉부 종양을 추출한다. 실험 결과, 제안한 방법이 초음파 데이터에 대하여 평균 에러율이 약 4% 미만으로 나타났다.

• 한국의학물리학회지:의학물리
• /
• 제7권2호
• /
• pp.79-90
• /
• 1996

본 논문에서는 2 차원 심초음파도의 경계선 유사 영역에 대해 베이즈 추정기를 사용하여 경계선 검출을 위한 자동문턱 결정방법을 제안하고자 한다. 경계선 유사영역은 전처리과 정에서 흐려진 영상을 명확히 하는데 사용할 열비등방성 확산 방법의 전도계수로부터 얻어진다, 이러한 경계선 유사 영역에 대해 최적 문턱치를 선택하기 위해 베이즈 추정기가 사용되었다. 이 문턱치를 사용하여 영상을 이진화함으로서 심초음파도의 경계선을 자동 적으로 검출하게 된다. 마지막으로 본래의 심초음파도에 위에서 얻어진 경계선을 덧씌움으로써 경계선이 강조된 심초음파도를 얻을 수 있게 된다.

• Journal of electromagnetic engineering and science
• /
• 제11권1호
• /
• pp.16-26
• /
• 2011

This paper presents high power and high efficiency Doherty amplifiers for 2.345 GHz wireless broadband (WiBro) applications that use a Nitronex 125-W ($P_{3dB}$) GaN high electron mobility transistor (HEMT). Two- and three-way Doherty amplifiers and a saturated Doherty amplifier using Class-F circuitry are implemented. The measured result for a center frequency of 2.345 GHz shows that the two-way Doherty amplifier attains a high $P_{3dB}$ of 51.5 dBm, a gain of 12.5 dB, and a power-added efficiency (PAE) improvement of about 16 % compared to a single class AB amplifier at 6-dB back-off power region from $P_{3dB}$. For a WiBro OFDMA signal, the Doherty amplifier provides an adjacent channel leakage ratio (ACLR) at 4.77 MHz offset that is -33 dBc at an output power of 42 dBm, which is a 9.5 dB back-off power region from $P_{3dB}$. By employing a digital pre-distortion (DPD) technique, the ACLR of the Doherty amplifier is improved from -33 dBc to -48 dBc. The measured result for the same frequency shows that the three-way Doherty amplifier, which has a $P_{3dB}$ of 53.16 dBm and a gain of 10.3 dB, and the saturated Doherty amplifier, which has a $P_{3dB}$ of 51.1 dBm and a gain of 10.3 dB, provide a PAE improvement of 11 % at the 9-dB back-off power region and 7.5 % at the 6-dB back-off region, respectively, compared to the two-way Doherty amplifier.

• 천문학회보
• /
• 제36권2호
• /
• pp.54.2-54.2
• /
• 2011

We present a study of HII regions in M51 using HST/ACS images taken as part of the Hubble Heritage Program. We found about 19,600 HII regions in M51 with $H_{\alpha}$ luminosity in the range of $L=10^{35.5}-10^{39.0}\;erg\;s^{-1}$. The $H_{\alpha}$ luminosity function of HII regions (HII LF) in M51 is well represented by a double power law with its index ${\alpha}=-2.25{\pm}0.02$ for the bright part and ${\alpha}=-1.42{\pm}0.01$ for the faint part, separated at a break point $L=10^{37.1}\;erg\;s^{-1}$. Comparison with simulated HII LFs suggests that this break is caused by the transition of HII region ionizing sources, from low-mass clusters (including several OB stars) to more massive clusters (including several tens of OB stars). The HII LFs with L < $10^{37.1}\;erg\;s^{-1}$ are found to have different slopes for different parts in M51: the HII LF for the interarm region is steeper than those for the arm and the nuclear regions. This observed difference in HII LFs can be explained by evolutionary effects: HII regions in the interarm region are relatively older than those in the other parts of M51. The size distribution of the HII regions is fitted by a double power law with a break at D = 30 pc. The power law index for the small HII regions with 15 pc < D < 30 pc is ${\alpha}=-1.78{\pm}0.04$, whereas ${\alpha}=-5.04{\pm}0.08$ for the large HII region with 30 pc < D < 110 pc. The power law indices of the size distribution are related with those of HII LF, and the relation between the luminosities and sizes of HII regions is fitted well by $L{\propto}D^{3.04{\pm}}$.

• 한국동물위생학회지
• /
• 제34권2호
• /
• pp.103-109
• /
• 2011

Asia1/Shamir that has been recommended by World Reference Laboratory for foot-and-mouth disease (FMD) is used as a vaccine strain, and is being prepared in many countries including Korea. Although it is assumed that vaccine strain Asia1/Shamir has a wide antigenicity, sufficient molecular biological analysis has not been accomplished yet. Complete genome sequence analysis showed that the region with the most severe variations was 1D region of structural protein-coding sequence; particularly amino acid 141~157 residues in 1D region RGD sites for binding to susceptible cells. In addition, five amino acids in 1D region were identified as characteristic sites that are different from other known Asia1 viruses. Asia1/Shamir strain was shown to be genetically similar to group VI that had occurred in the Middle East, but showed low level of genetic similarity to the group V viruses that had occurred in the Southeast Asia and China. It is considered that, if these viruses, group I and II including group V are introduced into Korea, care would be paid in case of inoculating the vaccine strain Shamir available in Korea.

• Journal of Periodontal and Implant Science
• /
• 제35권2호
• /
• pp.449-460
• /
• 2005

Objectives Aim of this study was to evaluate the clinical use and the efficacy of Frialit-2 implant system. Experimental Methods Fifty nine patients received placement of Frilalit-2 implants(137 implants) in their maxillary anterior and posterior sites(40 and 97 implants). Intraoral & clinical examination, chart review and radiographs were taken from each patient. Results 1. The total implant survival rate was 92.7% after a mean follow-up period of 19.9 months. 2. The implant survival rate placed in anterior region was 97.5%. 3. The implant survival rate placed in posterior region was 90.7%. 4. The implant survival rate placed in atrophic posterior maxilla with advanced technique (GBR, Sinus elevation) was 87.2%. 5. The implant survival rate placed in type N(D4) bone was 82%, while 95.7% in type III (D3), and 100% in type II(D2) bone. 6. Most of the failed implants(7 of 10) were removed during the maintenance stage after prosthodontic treatment. Conclusion It was concluded that Frialit-2 implant could be used satisfactorily in the esthetic anterior region, but the use in the posterior region, especially with poor bone quality and quantity, further studies are needed.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 춘계학술발표대회
• /
• pp.48-48
• /
• 2001

A new neurological mutant has been found in the ICR outbred strain mouse. Affected mice display profound deafness and a head-tossing and bidirectional circling behavior, showing an autosomal recessive mode of inheritance. It was, therefore, named cir/Kr with the gene symbol cir. The auditory tests identified clearly the hearing loss of the cir mice when compared to wild type mice. Pathological studies confirmed the developmental defects in the middle ear, cochlea, cochlear nerve, and semicircular canal areas, which were correlated to the abnormal behavior observed in the cir mice. Thus, cir mice may be useful as a model for studying inner ear abnormalities and deafness. We have constructed a genetic linkage map by positioning 14 microsatellite markers across the (cir) region and intraspecific backcross between cir and C57BL/6J mice. The cir mouse harbors an autosomal recessive mutation on mouse chromosome 9. The cir gene was mapped to a region between D9Mit116 and D9Mit38 Estimated distances between cir and D9Mit116, and between cir and D9Mit38 are 0.7 and 0.2 cM, respectively. The gene in order was defines : centromere-D9Mit182-D9Mit51/D9Mit79/D9Mit310-D9Mit212/D9Mit184-D9Mit116-cir-D9Mit38-D9Mit20-D9Mit243-D9Mit16-D9Mit55/D9Mit125-D9Mit281. The mouse map location of the cir locus appears to be in a region homologous to human 3q21. Our present date suggest that the nearest flanking marker D9Mit38 provides a useful anchor for the isolation of the cir gene in a yeast artificial chromosome contig.

• Steel and Composite Structures
• /
• 제25권6호
• /
• pp.639-648
• /
• 2017

Fracture energy values KV have been measured on cast steel, used in the container manufacture, by instrumented Charpy impact testing. This material has a large ductility on the upper transition region at $+20^{\circ}C$ and a ductile tearing with an expended plasticity before a brittle fracture on the lower transition region at $-20^{\circ}C$. To assess the fracture toughness of this material we use, the $K_{IC}$-KV correlations to measure the critical stress intensity factor $K_{IC}$ on the lower transition region and the dynamic force - displacement curves to measure the critical fracture toughness $J{\rho}_C$, the essential work of fracture ${\Gamma}_e$ on the upper transition region. It is found, using the $K_{IC}$-KV correlations, that the critical stress intensity factor $K_{IC}$ remains significant, on the lower transition region, which indicating that our testing material preserves his ductility at low temperature and it is apt to be used as a container's material. It is, also, found that the $J_{\rho}-{\rho}$ energetic criterion, used on the upper transition region, gives a good evaluation of the fracture toughness closest to those found in the literature. Finally, we show, by using the ${\Gamma}_e-K_{IC}$ relation, on the lower transition region, that the essential work of fracture is not suitable for the toughness measurement because the strong scatter of the experimental data. To complete this study by a numerical approach we used the ANSYS code to determine the critical fracture toughness $J_{ANSYS}$ on the upper transition region.

• 로봇학회논문지
• /
• 제12권1호
• /
• pp.33-41
• /
• 2017

We present a region-based approach for accurate pose estimation of small mechanical components. Our algorithm consists of two key phases: Multi-view object co-segmentation and pose estimation. In the first phase, we explain an automatic method to extract binary masks of a target object captured from multiple viewpoints. For initialization, we assume the target object is bounded by the convex volume of interest defined by a few user inputs. The co-segmented target object shares the same geometric representation in space, and has distinctive color models from those of the backgrounds. In the second phase, we retrieve a 3D model instance with correct upright orientation, and estimate a relative pose of the object observed from images. Our energy function, combining region and boundary terms for the proposed measures, maximizes the overlapping regions and boundaries between the multi-view co-segmentations and projected masks of the reference model. Based on high-quality co-segmentations consistent across all different viewpoints, our final results are accurate model indices and pose parameters of the extracted object. We demonstrate the effectiveness of the proposed method using various examples.

• Advances in Computational Design
• /
• 제2권2호
• /
• pp.147-168
• /
• 2017

Over the past couple decades, externally bonded fiber reinforced polymer (FRP) composites have emerged as a repair and strengthening material for many concrete infrastructure applications. This paper presents an analytical investigation of the use of carbon FRP (CFRP) for a specific problem that occurs in concrete bridge girders wherein the girder ends are damaged by excessive exposure to deicing salts and numerous freezing/thawing cycles. A 3D finite element (FE) model of a full scale prestressed concrete (PC) I-girder is used to investigate the effect of damage to the cover concrete and stirrups in the end region of the girder. Parametric studies are performed using externally bonded CFRP shear laminates to determine the most effective repair schemes for the damaged end region under a short shear span-to-depth ratio. Experimental results on shear pull off tests of CFRP laminates that have undergone accelerated aging are used to calibrate a bond stress-slip model for the interface between the FRP and concrete substrate and approximate the reduced bond stress-slip properties associated with exposure to the environment that causes this type of end region damage. The results of these analyses indicate that this particular application of this material can be effective in recovering the original strength of PC bridge girders with damaged end regions, even after environmental aging.