• Geomechanics and Engineering
• /
• v.6 no.4
• /
• pp.321-340
• /
• 2014

Uplift response of symmetrical circular anchor plates has been evaluated in physical model tests and numerical simulation using Plaxis. The behavior of circular anchor plates during uplift test was studied by experimental data and finite element analyses in loose sand. Validation of the analysis model was also carried out with 50 mm, 75 mm and 100 mm diameter of circular plates in loose sand. Agreement between the uplift responses from the physical model tests and finite element modeling using PLAXIS 2D, based on 100 mm computed maximum displacements was excellent for circular anchor plates. Numerical analysis using circular anchor plates was conducted based on hardening soil model (HSM). The research has showed that the finite element results gives higher than the experimental findings in the loose sand.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.48-55
• /
• 1997

This paper is characterized as comparison with Abkowitz and MMG mathematical model for the manoeuvring prediction using the Horizontal Planar Motion Mechanism tests at the initial design stage. The MMG analysis algorithm of this paper was studied according to the developed method by the MMG(Mathematical Modelling Group) organized in Japen. The simulation results were compared with those of Abkowitz mathematical model and sea trial, taking a product carrier as an example vessel.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.579-585
• /
• 1996

A CATHENA model for the reactor regulating system is developed and tested independently. A CATHENA plant model is created by combining this model with the reference CATHENA model which has been developed to analyze a loss-of-coolant accident (LOCA) for the Wolsong 2 generating station. This model is intended to provide a trip coverage analysis capability. The CATHENA reactor regulating system model includes the demand power routine. the light water zone control absorbers, mechanical control absorbers and adjusters. The CATHENA model is tested for steady state at 103% full power. A postulated accident transient (small LOCA) was also tested. The results show that the control routines in CATHENA were set up properly.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1215-1220
• /
• 2008

The aim of this paper is to perform a finite element analysis that will have the ability to predict the seal performance characteristics, such as deformation, contact load and friction and also is to provide a means of potential seal designs, which can reduce the time and cost of designing the performance of the seal. The material property tests of elastomer seal are performed to obtain the hyperelastic properties and The Mooney-Rivlin constants are determined from these test results. A 2D modelling of the seal cross section is performed to simulate the contact behavior between the seal on the piston and the cylinder bore under operation conditions. The deformation behavior, contact load and friction of an elastomer seal is analyzed by a finite element method which performs three analytic phases of interference fit, the variations of pneumatic pressure and piston movement under the operational conditions.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.45-48
• /
• 2000

본 논문은 현재 고성능 가역압축 부호화의 표준이 되는 JPEG-LS의 예측오차에 대한 확률분포를 결정하는 컨텍스트 모델링(context modelling)에서 컨텍스트 정수의 결정 방법에 관해 기술한다. 먼저, 압축률 향상을 위해 낮은 대비(low contrast)를 적용하는 전처리 과정을 도입한다. 둘째로, 낮은 복잡도(low complexity)를 위해 주목화소와 주변화소 사이의 차분을 양자화하고, 그 값 Q$_1$,Q$_2$, Q$_3$로부터 컨텍스트 정수(Q)의 결정을 위해 우선 순위를 정한 후, 3차원 가상좌표 위로의 할당을 고려한다. 또한, 제안 방법과 JPEG-LS의 near-lossless부분을 비교하여, 다양한 영상에 대하여 적용시켜 본 결과, 제안한 방법의 압축률과 손실이득이 훨씬 좋음을 보인다.

• 한국해양학회지
• /
• v.28 no.2
• /
• pp.121-131
• /
• 1993

The tidal front forming in the Mid-Yellow Sea off Korea, near Tae-An peninsular, is calculated using a 3-D general circulation model(Semtner, 1974) and the concept of mixing rate, an extension of the concept of mixing efficiency proposed by simpson & Hunter(1974). Along the north and south open boundaries, simple radiation conditions are applied. The model is run with the initial state which represents the winter condition. With imposed uniform heating by solar radiation and spatially-different vertical mixing, the model then generated the tidal front comparable to the observed one.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.71.3-72
• /
• 2016

운동학적으로 측정된 질량과 측광으로 측정된 질량이 불일치하는 질량 불일치 문제는 현대천문학의 중요한 문제이다. 현재 이러한 질량 불일치에 대한 두 가지 해결책이 제시 되었다. 하나는 현대 표준우주론인 ${\Lambda}CDM$ 패러다임의 핵심 요소인 암흑물질, 다른 하나는 Milgrom에 의해 제시된 수정된 뉴턴역학(Modified Newtonian dynamics: MOND)이다. 두 방법에 대한 많은 연구가 진행되었는데, 최근 연구 결과에 의하면 나선형 은하의 회전속도 윤곽은 MOND와 잘 부합하나 타원은하에 대해서는 불명확하다. 여기서 우리는 ATLAS3D project 에서 얻어진 260개의 조기형 은하 중 거의 원형인 11개의 타원은하들을 선별하여 표준패러다임(뉴턴역학과 암흑물질)과 MOND 하에서 속도분산 윤곽에 대한 모델링을 수행하였다. 속도분산 anisotropy에 대한 parametric 모형을 가정하고 다음의 결과를 얻었다. (1) anisotropy가 속도분산 윤곽에 큰 영향을 준다는 것을 확인하였고, (2) 전체적으로 표준패러다임과 MOND 중 어느 패러다임이 관측된 속도분산 윤곽에 더 잘 부합하는지 결론을 도출하기가 어려웠고, (3) 은하 개별적으로는 표준패러다임 하에서 요구되는 암흑물질의 양이 달랐고, 선호되는 MOND 모형에서도 미세한 차이가 나타나는 것으로 보였다. 이 결과는 anisotropy에 대한 더 나은 이해를 바탕으로 개선될 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• v.38 no.3
• /
• pp.283-300
• /
• 2011

A new conception of fundamental tasks in dynamics of the bridge-track-train systems (BTT), with the aim to evaluate moving load's models adequacy, has been developed. The 2D physical models of BTT systems, corresponding to the fundamental tasks, have been worked out taking into account one-way constraints between the moving unsprung masses and the track. A method for deriving the implicit equations of motion, governing vibrations of BTT systems' models, as well as algorithms for numerical integration of these equations, leading to the solutions of high accuracy and relatively short times of simulations, have been also developed. The derived equations and formulated algorithms constitute the basis for numerical simulation of vibrations of the considered systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.50-61
• /
• 2002

In this study, 3-dimensional virtual visualization was performed for a rapid and accurate analysis of sea bottom topography, The visualization was done through the extracted data using the developed program and the generated data using the gridding method. The data extraction program was developed with AutoLISP programming language and this program was able to extract the needed sample bathymetry data from the electronic sea chart systematically as well as effectively. The gridded bathymetry data were generated by the interpolation or extrapolation method from the spatially-irregular sample data. As the result of realization for the 3-dimensional virtual visualization, it was shown a proper feasibility in the analysis of the sea bottom topography to determine the route of submarine cable burial.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.438-444
• /
• 1997

Recently, optical disk drives are increasingly demanded to have higher speed as well as high information density, especially for applications like CD-ROM drives. To this end, improvement of their optical pick-up structure and control is recognized the very challenging issue. In this paper, the 2-D motion of the pick-up is first analytically modelled to identify the cause and effect of the troublesome cross coupling between auto-focusing and tracking directions. Subsequently, the overall system equations are derived to include the dynamics of the related components in the auto-focusing servo system. While its unmeasurable parameters being estimated by the least square error method, a simple but decent linear model can be obtained within its operating frequency range. To design the high speed and robust positional servo controller, the design specifications are detailed and H$\sub$.inf./ control method is employed based on the simple model. Using the pickup in a commercial 8 fold speed CD-ROM drive as an example, performance of the designed controller is verified by realtime experiments.