• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.150-159
• /
• 2012

This study intend to analyze differences between 3D body scanning sizes and direct measurement sizes of same subjects. The subjects of study are female students of university in China. 3D data analyze as a 3D Body Measurement Soft System. The conclusion found is as below: In case of circumferences, error between direct-measurement size and 3D body scanning size is from 4.9mm to 62.2mm. The neck circumference size of directmeasurement is bigger than 3D body scanning size. The height error range is from 0.6mm to 51mm. Height of underbust, waist and hip are that direct-measurement sizes are higher than 3D body scanning sizes. Gap of width is from 3.8mm to 21.9mm. The gap range is too narrow relatively to others. Only direct-measurement size of neck width is wider than 3D body scanning size. Error range of length is from 0.3mm to 41.8mm. 3D body scanning sizes of lateral neck to waistline, upperarm length, arm length, neck shoulder point to breast point, shoulder center point to breast point, lateral shoulder to breast point are longer than direct-measurement sizes. They have a negative margin of error. I intend to set up same measurement point between direct-measurement and 3D body scanning but they have some errors because direct-measurement point is applied by a person. 3D body scanning measurement point is settled by automatic system. A measurement point of direct-measurement and 3D body scanning isn't unite. So we need to make a standard of setting up measurement points.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.145-154
• /
• 2015

This study aims to identify the differences of body image when the stripe direction and width change of semi-tight skirt. The semi-tight skirt pattern was made using the standard size of a women in their 20s. 12 semi-tight skirt models combining 6 kinds of stripe directions and 2 kinds of stripe widths were made using CLO 3D virtual clothing system. The data was evaluated by 126 fashion design majors. The results were as follows; In accordance with the body image factor analysis of semi-tight skirt, three image factors were identified; whole body optical illusion, calf optical illusion and hip optical illusion. Among these factors, the whole body optical illusion factor is the most important factor. The body image depending on the stripe direction and width change of semi-tight skirt mostly showed the significant difference. In accordance with the analysis on the interaction effect of body image depending on the stripe direction and width change of semi-tight skirt, the whole body, calf and hip optical illusion factors showed the significance. The interaction of body image had independent influence on all factors of stripe direction and width. In particular, the interaction of stripe direction and width had the most significant influence on the whole body optical illusion.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.597-606
• /
• 2012

To increase the productivity and product quality of customized baseball jerseys, this study developed a multi-variable system for a production process that efficiently controls diverse production management factors. The working time was measured through the establishment of a standard process where skilled workers and Chinese factory workers manufactured 5 sets of the same basic design jerseys. Based on the measured working time (1,136 seconds/per unit), the multi-variable process control system was developed, where hourly production management is possible according to the involved workers and equipment types. Each process was assigned accoding to the production management factors for a total of 28 standard processes. The processes were developed based on consideration of work characteristics according to the order of needlework of open-type set baseball jerseys with sleeves(the basic design of baseball jerseys)to result in a customized production system structure that could be set up with multi-variables. As a result, a total 12 types of systems were developed in consideration of the personnel involved and the number of equipments. The optimal production management system (with the highest efficiency compared to the number of workers)was A-2, B-1, C-1. D-2, E-2, F-1, and G-1. This system had extremely high efficiency and showed 99% assignment efficiency for the 7-person team. Though not optimal, possible process assignment for each working personnel is proposed as a reserve process in case work modification is inevitable due to malfunctions and the absence of equipments.

• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.627-639
• /
• 2023

This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm-0.5cm, front hip girth H/4+2.5cm-0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern's appearance was evaluated more highly than the comparison pattern, confirming the new pattern's appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.

• Journal of Korea Game Society
• /
• v.5 no.2
• /
• pp.3-9
• /
• 2005

Interactive real-time 3D enables users to explore virtual three dimensional environments and also experience contents in an absorbing fashion. Unlike other media, Interactive real-time 3D users take an active role in the process of "real-time fashion" where action and reaction occur instantly in a digital 3D structure. Once the components and origins of interactive real-time 3D is made, it is possible making principles of the beauty that help decide success or failure of real-time 3D in two way system. Substantial real-time 3D has not yet passed 10 years so it was unable to make sufficient precedents of fundamental artistic value based upon the credibility of the media. The goal is to explain the new form of design in relation to general principles of arts at the same time to understand the technical definition better. Concepts of historical documentation are explained with an example of categorization of recent video game and recent technology. This thesis concludes with rough forecast on the future interactive real time 3D. Since the medium began relatively recently and is developing in the rapid pace, recent analyses, though clear forecast is difficult, tend to investigate potential directions to some level the field allows.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.391-406
• /
• 1993

The purpose of this study was to utilize of apparel CAD System by the classification of the basic pattern block in pattern making process. Gerber AM-300 CAD System was used for this study. The results form this study were as follows; 1. New shirts block were developed. 2. The sensory test was applied to evaluate the new shirts block for women by comparing it with Japanese Bunka shirts blouse pattern making method. According to a statistical analysis of the result of the 20 items on the questionnaire, the 19 items showed significant difference(${\alpha}{\leq}0.01$)between the two, with the new shirts block having higher scores. 3. A basic pattern block was selected by the design sketch. 4. P/D/S were enabled to be constructed directly from a block pattern. The drawing, deletion. duplication, and movement of all points and lines in the pattern might be made freely, and the split, pivot, and movement of the pattern, and the attachment of two patterns were possible. 5. Automatic grading of finished pattern have been developed by creation and modification of grading rules of block pattern.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.1-13
• /
• 2013

The study is to provide basic data on improving costume's fitting by developing physical integrated Basic Bodice Block's development for body types of adult women, which is based on setting up body-type information per truncus as fundamental of adult women's top product manufacture in being ready for Mass Customization era. Also, after review on the objectivity and accuracy of fitting information by real wear and virtual wear experiment on body types, not only 3D virtual clothing system was used as way of information provider of Clothing product, but also provided as basic data in order to use effectively on portion of clothing passion in responding to trend of Mass customization in advance. The consequence of the study is as followings. After analyzing significance differences per items on real and virtual wear evaluation, bowed type of type 1 had significance differences on waist measurement and hip circumference in back and side, which would be knowing as not integrated with costume, affecting form of human body according to virtual wear system bended on back region. Also, in side evaluation, every types except straight body type of type 3 appeared significant differences. In virtual wear evaluation, costume's expression with side body types were not similar to real wear until now except straight body types. It would be improvement things from 3D virtual wear system in advance.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.527-536
• /
• 2007

This paper proposes a 3D fashion design system that generates a 3D clothes model by using 2D patterns of clothes and drapes the 3D clothes model on a 3D human model. In the proposed system, 2D patterns of clothes are designed by selecting comer points of 2D mesh. After designing 2D patterns, a 3D clothes model is designed by describing the control points to be connected between 2D patterns. The proposed system reads a 3D human body model file and the designed 3D clothes model and creates a 3D human model putting on the clothes by using the mass-spring model based physical simulation. It calculates collision and reaction between the triangles of human body model and those of clothes for realistic simulation. Because the number of triangles is very large, the collision and reaction processing need a lot of time. To solve this problem, the proposed system decreases the number of collision and reaction processing by using the Octree space subdivision technique. It took a few seconds for generating a 3D human model putting on the designed 3D clothes.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.766-775
• /
• 2016

In the era of globalization and unlimited competition, Korean universities need a breakthrough in their education system according to the changing education landscape, such as lower graduation requirements to cultivate more multi-talented convergence leaders. While each student has different learning capabilities, which results in different performance and achievements in the same class, the uniform education that most universities are currently offering fails to accommodate such differences. Blended learning, synergically combining offline and online classes, enlarges learning space and enriches learning experiences through diversified tools and materials, including multimedia. Recently, universities are increasingly adopting video contents and on-offline convergence learning strategy. Thus, this study suggests a teaching method based on blended learning to more effectively teach existing pattern CAD and virtual CAD in the Apparel Pattern CAD class. To this end, this researcher developed a teaching-learning method and curriculum according to the blended learning phase and video-based contents. The curriculum consisted of 2D CAD (SuperAlpha: Plus) and 3D CAD (CLO) software learning for 15 weeks. Then, it was loaded to the Learning Management System (LMS) and operated for 15 weeks both online and offline. The performance analysis of LMS usage found that class materials, among online postings, were viewed the most. The discussion menu most accurately depicted students' participation, and students who did not participate in discussions were estimated to check postings less than participating students. A survey on the blended learning found that students prefer digital or more digitized classes, while preferring face to face for Q&As.