• Fashion & Textile Research Journal
• /
• v.2 no.3
• /
• pp.239-245
• /
• 2000

The purpose of this study was for analysis of ease about basic bodice pattern, as the first step of the research process for the drawing method of basic bodice for women in their twenties. The five selected basic bodice were made and they were worn by FRP body The garment space of each bodice was measured by analysis of the garment space of each section in figure of polymerization of cross section by a 3-D measuring instrument. The research suggests that this compared analysis is an objective reference. This analysis not only of the area of cross section of garment space and ease but also of the girth of the body shape and wearing shape, using the PAD system and 3-D measuring instrument, can be helpful in making garment patterns.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.457-467
• /
• 2016

This study aimed to develop functional underwear for elderly women in their sixties in terms of good fit, wear comfort and body temperature regulation. To satisfy elderly women's physical and metabolical needs, an automatic temperature control system via PCM treatment was applied. Underwear pattern was produced by producing body surface replica, which was derived from 3D body parametric model. Differential ratios of outline length and area between 3D surface and 2D plane were 1.4% and 0.5%, respectively. The reduction rate was determined as 10% through the expert's evaluation. PCM treated fabric showed higher Q-max, meaning that it can facilitate the thermal transition in hot situation. Moreover, it also showed higher insulation to preserve heat and keep warm microclimate in a cold weather. Heat distribution measurements on various body parts revealed that the temperature after PCM treatment was significantly higher. The clothing pressure after 10% pattern reduction showed higher before reduction, at the same time, even lower than the comfort clothing pressure range of $5{\sim}10gf/cm^2$, implying that experimental garment of this research is acceptable in terms of clothing pressure. Evaluation results on the comfort to move in various motions proved that adequate clothing pressure improved the wear comfort in various motions.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.124-133
• /
• 2016

Currently the fashion industry is developing to create a novel culture due to the very sensitive and knowledge-oriented advancement of the IT industry. With fast turnover of information, consumers have come to have a more diverse desire for purchasing. Cubical expression techniques, which empathizes formativeness, can be a creative expression method adjusting into the trend of this era. Along with functional aspects of consumers, even in a textile manufacturing sector, new materials are required to meet sensitive and emotional aspects. Consumers' desire for new and creative designs and the development and adoption of new materials are essential to meet their emotions. The IT industry and fashion industry are forced to combine and a 3D apparel CAD system has been developed, enabling virtual clothing to be represented within a computer virtual space. All processes such as design, pattern creation, sewing and simulation are possible in 3D level. Digital clothing can shorten the production process time and is very effective in that it can reduce clothing waste generated during the sample production. This paper reviewed the works of Dutch designer, Iris van Herpen, who has developed formative designs. She tries to build, construct, and sculpt employing diversified materials other than soft textile materials, as shown in her series of fashion shows. The materials include films, 3D printed polymers, stiff and sheer organza, and artificial leather textiles. A few characteristics of her works have been selected in order to prepare patterns exhibiting the traits. The paper further focused on the physical features of the textile materials used to express similar techniques and its various forms were reviewed.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.963-970
• /
• 2013

The purpose of this study was to develop torso pattern of underweight female in their 20s~30s by using Clo 3D virtual garment simulation system. The results were as follows; first, as a result of analyzing torso somatotype, underweight women showed lower average than average values of whole women in their twenties and thirties in the items such as length, width, circumference, thickness except for height. Second, by using 3D virtual garment simulation, new torso pattern considered underweight female was development. The basic numerical formula were as follows ; bust girth B/2+3.5, armhole depth B/4+0.5, front waist girth W/4+0.5+0.7, back waist girth W/4+0.5-0.7, front hip girth H/4+1+0.5, back hip girth H/4+1-0.5, chest width B/6+3.1, back width B/6+4.5, neck width B/12+0.2 and neck depth B/12+1.7. Third, by reducing hollowed amount of front, back, and side line, and hollowed amount of back center line, the reduced quantity was included to darts amount. Number of dart was adjusted to two pieces so that darts amount was equally distributed to two darts. Forth, according to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern was appropriate for the underweight women. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.2
• /
• pp.312-327
• /
• 2024

In this study, a rehabilitation 3D printed wearable device was developed by combining an assembly-type robot hand and an integral-type robot hand through fused deposition 3D printing manufacturing with various hardness TPU (Thermoplastic Polyurethane) filaments. The hardware configuration of the robot hand includes a controller designed with four motors, one small servo motor, and a circuit board. In the case of the assembly-type robot hand model, a 3D printed robot hand was assembled using samples printed with TPU of hardness 87A and 95A. It was observed that TPU with a hardness of 95A was suitable for use due to shape stability. For the integrated-type robot hand model, the external sample using TPU of hardness 95A could be modified through a cutting method, and the hardware configuration is the same as the assembly-type. The system structure of the 3D printed robot hand was improved from an individual control method to a simultaneous transmission method.Furthermore, the system architecture of an integrated 3D printed robotic hand rehabilitation device and the application of the rehabilitation device were developed.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.59-66
• /
• 2019

The purpose of this study was to develop slacks pattern of elderly women aged over 60s by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, By using 3D Virtual Garment Simulation, new slacks pattern considered elderly women was development. The basic numerical formula were as follows, front waist girth W/4+2+1.5, back waist girth W/4+1.5+0.5, front hip girth H/4+0.75, back hip girth H/4+1.5, front crotch extension H/16-0.5, back crotch extension H/8-1.3, front dart amount 2 and back dart amount 1.5. Second, according to the results of the new slacks pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new slacks pattern is appropriate for the elderly women. Also, new slacks pattern was evaluated to allow proper space length of waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• Journal of the Korean Home Economics Association
• /
• v.44 no.2 s.216
• /
• pp.127-135
• /
• 2006

This paper suggests guidelines for virtual clothes modeling and draping software suitable for clothes designers. We first analyze Maya Cloth, which is widely used in game and animation fields, and which has been adopted by Pad System as a 3D cloth draping system. We then discuss what functions and procedures would improve Maya Cloth to assist designers in being able to create the clothes they have conceptualized. While Maya Cloth has many good functions and features forvirtual cloth modeling and draping, it treats input 2D patterns as approximat and it creates 3D clothes by considering other factors such as the 3D body model. As a result, it is hard for clothes designers to control the shape of the 3D clothes by changing 2D patterns. Furthermore, Maya Cloth does not handle seamlines satisfactorily. We suggest that the following new features should be added to Maya Cloth : respecting the input 2D patterns, handling seamlines, and controlling the shape of the clothes in 3D space.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.2
• /
• pp.211-223
• /
• 2018

In global apparel product development, flat is one of the most important key factor for technical design communication. Proportionally correct flats based on correct scaled human body figures are imperative to be successful in the fashion business. In this study the researchers were to develop body templates for flats for Korean women body types using data from 'Size Korea 2004 (5th)', which is a Korean government apparel sizing project to analyze women's body measurements (age range 7-49). We measured 13 height measurements, 6 width measurements, 8 circumference measurements, 6 length measurements, 3 angle measurements and 5 body measurements. A body figure (i.e., schema) for each group was created by Pattern Design Software (PAD) System 4.1. Muscle was added to the schema created by Adobe Illustrator to ensure a better visualization and convenience for industry uses for flats. Developed body figure template of representative type had the largest difference in height level compared to exiting figures. It had a bigger head, lower crotch level, and longer crotch depth and hip length than existing figures.

• The Research Journal of the Costume Culture
• /
• v.28 no.3
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.