• 제목/요약/키워드: 2D band

검색결과 2,933건 처리시간 0.035초

HWE 방법에 의한 $AgGaS_2$/GaAs epilayer 성장과 특성 (Study of characteristics of $AgGaS_2$/GaAs epilayer by hot wall epitaxy)

  • 홍광준;정준우;방진주;진윤미;김소형;여회숙;양해정
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
    • /
    • pp.84-91
    • /
    • 2002
  • The stochiometric composition of $AgGaS_2$/GaAs polycrystal source materials for the $AgGaS_2$/GaAs epilayer was prepared from horizontal furnace. From the extrapolation method of X-ray diffraction patterns it was found that the polycrystal $AgGaS_2$/GaAs has tetragonal structure of which lattice constant an and Co were 5.756 $\AA$ and 10.305 $\AA$, respectively. $AgGaS_2$/GaAs epilayer was deposited on throughly etched GaAs(100) substrate from mixed crystal $AgGaS_2$/GaAs by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $590^{\circ}C$ and $440^{\circ}C$ respectively. The crystallinity of the grown $AgGaS_2$/GaAs epilayer was investigated by the DCRC (double crystal X-ray diffraction rocking curve). The optical energy gaps were found to be 2.61 eV for $AgGaS_2$/GaAs epilayer at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation, then the constants in the Varshni equation are given by $\alpha=8.695{\times}10^{-4}$ eV/K, and $\beta=332K$. From the photocurrent spectra by illumination of polarized light of the $AgGaS_2$/GaAs epilayer, we have found that crystal field splitting ${\Delta}Cr$ was 0.28 eV at 20 K. From the PL spectra at 20 K, the peaks corresponding to free and bound excitons and a broad emission band due to D-A pairs are identified. The binding energy of the free excitons are determined to be 0.2676 eV and 0.2430 eV and the dissociation energy of the bound excitons to be 0.4695 eV.

  • PDF

마우스에서 고려 홍삼의 구강내 섭취를 통한 소음성 난청의 예방효과 (The Protective Effect of Orally Ingested Korean Red Ginseng on the Noise Induced Hearing Loss in Mice)

  • 안중호;김태수;정하나;이나영;정종우
    • Journal of Ginseng Research
    • /
    • 제33권2호
    • /
    • pp.104-110
    • /
    • 2009
  • 고려 홍삼이 소음성 난청에서 청력 보호 및 회복에 관여하는 지를 밝히기 위하여 마우스에서 홍삼을 투여 후 소음에 노출시켜 청력 역치의 변화 및 와우의 활성 산소 유리기에 대한 노출 정도를 보았다. 영구적 청력 역치 이동의 경우에 홍삼은 청력 보호 및 회복에 관여하지 못했다. 하지만 일과성 청력 역치 이동의 경우에는 홍삼이 어느 정도의 농도 이상으로 투여 된다면 청력 회복에 효과적으로 작용하는 것으로 밝혀졌다. 향후 홍삼의 난청 억제 효과에 대해 적정 농도 및 투여 방법 등에 대한 후속연구가 뒤따라야 하겠고 인간에서 발생하는 소음성 난청에의 적합성 판정을 위해 보다 장깆거인 소음 노출 기간과 장기적인 홍삼 복용에 대한 연구가 필요하겠다. 또한 홍삼내의 여러 활성물질에 관한 연구를 통하여 보다 효과적인 화합물을 찾기 위한 노력도 동반되어야 할 것이다.

하이퍼스펙트럴영상 분류에서 정준상관분류기법의 유용성 (Usefulness of Canonical Correlation Classification Technique in Hyper-spectral Image Classification)

  • 박민호
    • 대한토목학회논문집
    • /
    • 제26권5D호
    • /
    • pp.885-894
    • /
    • 2006
  • 본 논문의 의도는 하이퍼스펙트럴 영상의 다량의 밴드를 사용하면서도 효율적인 분류기법의 개발에 초점을 두고 있다. 본 연구에서는 하이퍼스펙트럴 영상의 분류에 있어 이론적으로 밴드수가 많아질수록 분류정확도가 높을 것이라 예상되는, 다변량 통계분석기법중의 하나인 정준상관분석을 적용한 분류기법을 제안한다. 그리고 기존의 대표적인 전통적 분류기법인 최대 우도분류 방법과 비교한다. 사용되는 하이퍼스펙트럴 영상은 2001년 9월 2일 취득된 EO1-Hyperion 영상이다. 실험을 위한 밴드수는 LANDSAT TM 영상에서 열밴드를 제외한 나머지 데이터의 파장대와 일치하는 부분을 감안하여 30개 밴드로 선정하였다. 지상실제데이터로서 비교기본도를 채택하였다. 이 비교기본도와 시각적으로 윤곽을 비교하고, 중첩분석하여 정확도를 평가하였다. 최대우도분류의 경우 수역 분류를 제외하고는 전혀 분류기법으로서의 역할을 하지 못하는 것으로 판단되며, 수역의 경우도 큰 호수 외에 작은 호수나 골프장내 연못, 부분적으로 물이 존재하는 작은 영역 등은 전혀 분류하지 못하고 있는 것으로 나타났다. 그러나 정준상관분류결과는 비교기본도와 형태적으로 시각적 비교를 해볼 때 골프장잔디를 거의 명확히 분류해 내고 있으며, 도시역에 대해서도 고속도로의 선형 등을 상당히 잘 분류해내고 있음을 알 수 있다. 또한 수역의 경우도 골프장 연못이나 대학교내 연못, 기타지역의 연못, 웅덩이 등 까지도 잘 분류해내고 있음을 확인할 수 있다. 결과적으로 정준상관분석 알고리즘의 개념상 트레이닝 영역 선정시 시행착오를 겪지 않고도 정확한 분류를 할 수 있었다. 또한 분류항목 중에서 잔디와 그 외 식물을 구분해 내는 능력과 수역을 추출해 내는 능력이 최대우도분류기법에 비해 우수하였다. 이상의 결과로 판단해 볼 때 하이퍼스펙트럴영상에 적용되는 정준상관분류기법은 농작물 작황 예측과 지표수 탐사에 매우 유용하리라 판단되며, 나아가서는 분광적 고해상도 영상인 하이퍼스펙트럴 데이터를 이용한 GIS 데이터베이스 구축에 중요한 역할을 할 수 있을 것으로 기대된다.

전구체 프로합토글로빈과 성숙 합토글로빈의 시알산 함량 및 헤모글로빈-결합력 비교 (Differential Sialic Acid Content and Hemoglobin-binding Activity of Precursor Prohaptoglobin and Mature Haptoglobin)

  • 이주현;오미경;김인숙
    • 생명과학회지
    • /
    • 제27권6호
    • /
    • pp.632-639
    • /
    • 2017
  • 성숙 합토글로빈(haptoglobin, Hp)은 혈장 당단백질로서 혈중의 유리 헤모글로빈(hemoglobin, Hb)을 제거하고 항산화 작용을 한다. 프로합토글로빈(prohaptoglobin, proHp)은 Hp 전구체이며 혈중에 낮은 농도로 존재하지만 그 생리적 기능은 아직 확실하지 않다. 본 연구에서는 proHp와 Hp의 구조적, 기능적 차이를 연구하기 위하여 재조합 proHp를 제조하여 시알산과 Hb-결합력을 조사하고 성숙 Hp와 비교하였다. 비환원 조건의 Western blot 분석에서 proHp1은 약 130 kD의 하나의 밴드를 보였고 proHp2는 200 kDa 이상의 다중 밴드를 보였는데 이것은 대응되는 성숙 Hp1-1과 Hp2-2와 각각 동일한 양상이었다. 하지만 비환원 및 비변성 조건 하에서 수행된 전기영동에서는 proHp가 Hp보다 더 느리게 이동하였다. 렉틴을 이용한 ELISA 분석에서 proHp는 Hp보다 산성 당인 시 알산 함량이 더 낮음을 알 수 있었다. 또한 proHp는 Hb과의 결합력도 더 낮았다. 이러한 결과들로부터 proHp는 Hp와 같은 양상으로 중합체를 형성하지만 시알산 함량과 Hb-결합력이 Hp와 다름을 알 수 있었고 혈중에서 전구체인 proHp는 Hp와 다른 기능을 수행할 것임을 시사한다.

전이구간 부호화를 이용한 2.4 kbit/s 다중모드 음성 부호화 방법 (Method of a Multi-mode Low Rate Speech Coder Using a Transient Coding at the Rate of 2.4 kbit/s)

  • 안영욱;김종학;이인성;권오주;배문관
    • 대한전자공학회논문지SP
    • /
    • 제42권2호
    • /
    • pp.131-142
    • /
    • 2005
  • 현재 개발된 4 kbit/s이하의 저 전송율 음성부호화 시스템은 STC(Sinusoidal Transform Coding)나 MBE (Multi-band Excitation Coding)에 바탕을 두고 있다. 이러한 저 전송율 부호화기들은 대표적인 전이구간 신호인 유성음의 시작점과 끝점에서의 혼합신호(onset signal, offset signal), 비주기적인 신호(non-period signal) 등은 정확히 표현하지 못하기 때문에 자연스런 음질을 만들어 내지 못한다. 본 논문에서는 유성음에는 하모닉 모델, 무성음에서는 스토케스틱 모델, 전이구간에는 하모닉 기반의 비주기적인 펄스의 위치를 추적하는 방식을 사용하여 효과적으로 전이구간을 모델링 하는 방법과 2.4 kbit/s 다중모드 부호화방법을 제안한다. 제안한 방법은 원본신호에서 선형예측 부호화 방법으로 추출된 잔여신호를 신호의 성격에 따라 모델을 달리하는 방법이며, 자각의 신호의 성격에 따라 좋은 성능을 나타내는 모델을 사용하였다. 또한 효율적인 전이구간 모델링 방법의 도입으로 저 전송율에서 CELP(Code Excitation Linear Predictive) 부호화 방식에 의해 시간축에서 합성되는 여기신호와 선형위상을 이용한 하모닉 부호화 방식에 의해 주파수축에서 합성되는 여기신호를 효율적으로 결합이 가능하다는 것이 제안된 2.4 kbit/s 다중모드 부호화기의 장점이다. 제안된 방법의 2.4kbit/s 다중모드 부호화기는 미국 연방 표준부호화기인 2.4 kbit/s MELP(Mixed Excitation Linear Prediction) 부호화기보다 더 좋은 성능을 나타낸다.

암세포에서 Retroviral Vector를 이용한 종양괴사인자 유전자 이입후 획득된 종양괴사인자 내성의 기전 (The Mechanisms of Resistance to TNF in TNF-Sensitive Cancer Cells Transfected with TNF-$\alpha$ Gene Using Retroviral Vector)

  • 이혁표;오연목;유철규;김영환;심영수;한성구
    • Tuberculosis and Respiratory Diseases
    • /
    • 제44권3호
    • /
    • pp.547-558
    • /
    • 1997
  • 연구배경 : 종양괴사인자(tumor necrosis factor ; TNF)는 다양한 생물학적 기능을 가지고 있는바, 그 중 생체외에서 증명된 뚜렷한 항암효과로 말미암아 최근 항암유전자요법의 중요한 대상으로 관심을 모으고 있다. 그러나 유전자 이입의 기술적 문제로 생체외에서 암세포에 유전자 이입을 시행한 후 이를 다시 환자의 생체내로 이식하는 방법이 연구의 주종을 이루고 있다. 그러나 저지들의 과거의 연구를 포함한 여러 연구에서 TNF가 이입된 암세포는 TNF에 대해 내성을 보이는 것으로 증명되었다. 이 획득내성의 기전을 밝히는 것이 종양생물학의 이해를 넓히고 보다 효과적인 항암유전자 요법을 개발하기 위한 매우 중요한 과제로 생각된다. 저자들은 TNF 유전자 이입에 따른 암세포의 TNF에 대한 획득 내성에 새로운 방어단백질의 합성이 관여하는 지를 규명하고자 본 실험을 수행하였다. 방 법 : TNF에 감수성을 보이는 생쥐 섬유육종 세포주인 WEHI164에 TNF-$\alpha$ 유전자를 retroviral vector를 이용하여 이입하고 TNF의 발현을 시도하여 PCR, ELISA, MTT assay로 확인하였고, TNF 유전자가 이입된 세포(WEHI164-TNF)는 TNF에 내성을 보이는지 역시 MTT assay로 검증하였다. WEHI164-TNF세포를 transcription 억제제인 actinomycin D와 translation 억제제인 cycloheximide로 처리한 후 역시 MTT assay로 TNF에 대한 감수성에 변화를 보이는지 확인하였다. 결 과 : 1) TNF-$\alpha$ 유전자 이업 및 발현 확인 PCR을 시행한 결과 TNF 유전자가 이입된 WEHI164-TNF 세포주는 790 base pair 크기의 진한 DNA band를 보인 반면 모세포주는 보이지 않아서 retroviral vector를 이용한 유전자 이입이 DNA 수준에서 이루어졌음을 확인할 수 있었다. 그리고 WEHI164-TNF의 배양상층액에서 TNF양을 ELISA와 MTT assay로 측정한 결과, 생물학적 활성을 지닌 TNF를 $10.9{\pm}1.47ng/24hr/10^6cells$ 생산함을 알 수 있었다. 2) TNF 유전자 이입 전후, 암세포의 TNF에 대한 감수성 비교 TNF 농도 100ng/ml 에서 모세포는 $73{\pm}5%$의 세포독성을 보인 반면 WEHI164-TNF 세포는 $3{\pm}2%$의 세포독성을 보여 통계적으로 유의하게 (p < 0.00) TNF에 대한 내성을 획득함을 알 수 있었다. 3) TNF 유전자 이입 후 획득된 TNF에 대한 내성의 기전 WEHI164-TNF 세포를 actinomycin D로 처리한 경우 TNF 농도 10ng/ml과 100ng/ml에서 각각 $24{\pm}7%$, $44{\pm}6%$의 세포독성을 보여 control의 $6{\pm}2%$, $17{\pm}2%$보다 통계적으로 유의하게(p < 0.01) TNF에 대한 감수성이 부분적으로 회복됨을 관찰할 수 있었다. 그러나 cycloheximide로 처리한 경우에서는 TNF에 대한 감수성에 변화를 관찰할 수 없었다. 결 론 : TNF에 감수성을 보이는 암세포주인 WEHI164에 TNF 유전자를 이입하여 TNF를 발현하게 하였을 때 그 세포 자신은 TNF에 대해 내성을 획득하게되며 이에는 미지의 방어단백질의 합성이 일부 관여할 것으로 판단된다.

  • PDF

Quantum Confinement Effect Induced by Thermal Treatment of CdSe Adsorbed on $TiO_2$ Nanostructure

  • Lee, Jin-Wook;Im, Jeong-Hyeok;Park, Nam-Gyu
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.213-213
    • /
    • 2012
  • It has been known that quantum confinement effect of CdSe nanocrystal was observed by increasing the number of deposition cycle using successive ionic layer adsorption and reaction (SILAR) method. Here, we report on thermally-induced quantum confinement effect of CdSe at the given cycle number using spin-coating technology. A cation precursor solution containing $0.3\;M\;Cd(NO_3)_2{\cdot}4H_2O$ is spun onto a $TiO_2$ nanoparticulate film, which is followed by spinning an anion precursor solution containing $0.3\;M\;Na_2\;SeSO_3$ to complete one cycle. The cycle is repeated up to 10 cycles, where the spin-coated $TiO_2$ film at each cycle is heated at temperature ranging from $100^{\circ}C$ to $250^{\circ}C$. The CdSe-sensitized $TiO_2$ nanostructured film is contacted with polysulfide redox electrolyte to construct photoelectrochemical solar cell. Photovoltaic performance is significantly dependent on the heat-treatment temperature. Incident photon-to-current conversion efficiency (IPCE) increases with increasing temperature, where the onset of the absorption increases from 600 nm for the $100^{\circ}C$- to 700 nm for the $150^{\circ}C$- and to 800 nm for the $200^{\circ}C$- and the $250^{\circ}C$-heat treatment. This is an indicative of quantum size effect. According to Tauc plot, the band gap energy decreases from 2.09 eV to 1.93 eV and to 1.76 eV as the temperature increases from $100^{\circ}C$ to $150^{\circ}C$ and to $200^{\circ}C$ (also $250^{\circ}C$), respectively. In addition, the size of CdSe increases gradually from 4.4 nm to 12.8 nm as the temperature increases from $100^{\circ}C$ to $250^{\circ}C$. From the differential thermogravimetric analysis, the increased size in CdSe by increasing the temperature at the same deposition condition is found to be attributed to the increase in energy for crystallization with $dH=240cal/^{\circ}C$. Due to the thermally induced quantum confinement effect, the conversion efficiency is substantially improved from 0.48% to 1.8% with increasing the heat-treatment temperature from $100^{\circ}C$ to $200^{\circ}C$.

  • PDF

$CuGaSe_2$ 단결정 박막 성장과 광전류 특성 (Growth and Photocurrent Properties of $CuGaSe_2$ Single Crystal)

  • K.J. Hong
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.81-81
    • /
    • 2003
  • The stochiometric mixture of evaporating materials for the CuGaSe$_2$ single crystal thin films were prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal CuGaSe$_2$, it was found tetragonal structure whose lattice constant no and co were 5.615$\AA$ and 11.025$\AA$, respectively. To obtains the single crystal thin films, CuGaSe$_2$ mixed crystal was deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were 61$0^{\circ}C$ and 45$0^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5${\mu}{\textrm}{m}$/h. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by pizoelectric scattering in the temperature range 30K to 150K and by polar optical scattering in the temperature range 150K to 293K. The optical energy gaps were found to be 1.68eV for CuGaSe$_2$ single crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation then the constants in the Varshni equation are given by a=9.615$\times$ 10$^{-4}$ eV/K, and $\beta$=335K. From the photocurrent spectra by illumination of polarized light of the CuGaSe$_2$ single crystal thin films. We have found that values of spin orbit coupling ΔSo and crystal field splitting ΔCr was 0.0900eV and 0.2498eV, respectively. From the PL spectra at 20K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be 0.0626eV and the dissipation energy of the acceptor-bound exciton and donor-bound exciton to be 0.0352eV, 0.0932eV, respectively.

  • PDF

아말감 와동의 파절에 관한 3차원 유한요소법적 연구 (A STUDY ON AMALGAM CAVITY FRACTURE WITH THREE DIMENSIONAL FINITE ELEMENT METHOD)

  • 김한욱;엄정문;이정식
    • Restorative Dentistry and Endodontics
    • /
    • 제19권2호
    • /
    • pp.345-371
    • /
    • 1994
  • Restorative procedures can lead to weakening tooth due to reduction and alteraton of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus and depth are very important. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional. finite element models were made by serial photographic method and cavity depth(1.7mm, 2.4mm) and isthmus (11 4, 1/3, 1/2 of intercuspal distance) were varied. linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B, G and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. G model(Gap Distance: 0.000001mm) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). When compression occurred along the interface, the forces were transferred to the adjacent regions. However, tensile forces perpendicular to the interface were excluded. R model was assumed non-connection between the restoration and cavity wall. No force was transferred to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, von Mises stress, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as follows: 1. G model showed stress and strain patterns between Band R model. 2. B model and G model showed the bending phenomenon in the displacement. 3. R model showed the greatest amount of the displacement of the buccal cusp followed by G and B model in descending order. G model showed the greatest amount of the displacement of the lingual cusp followed by B and R model in descending order. 4. B model showed no change of the displacement as increasing depth and width of the cavity. G and R model showed greater displacement of the buccal cusp as increasing depth and width of the cavity, but no change in the displacement of the lingual cusp. 5. As increasing of the width of the cavity, stress and strain were not changed in B model. Stress and strain were increased on the distal marginal ridge and buccopulpal line angle in G and R model. The possibility of the tooth fracture was increased. 6. As increasing of the depth of the cavity, stress and strain were not changed in B and G model. Stress and strain were increased on the distal marginal ridge and buccopulpal line angle in R model. The possibility of the tooth fracture was increased.

  • PDF

강자성공명을 이용한 $Co_{84}\;Hf_{16}$ 박막의 자기적 성질 연구 (The Magnetic Properties of $Co_{84}\;Hf_{16}$ Thin Films by FMR)

  • 김기현;장재호;김영호
    • 한국자기학회지
    • /
    • 제7권4호
    • /
    • pp.191-195
    • /
    • 1997
  • DC magnetron sputtering 방법에 의해 $Co_{84}$H $f_{16}$ 박막 (1300 .angs. , 2150 .angs. )을 제작하였다. 박막의 자기적 특성을 조사하기 위해서 J-band (7.42 GHz) 마이크로파 영역의 강자성 공명 (ferromagnetic resonance) 장치를 이용하였다. 측정된 공명 흡수선의 주 모드(main mode)로부터 계산된 분광학적 분리상수 g 값은 1300 .angs. , 2150 .angs. 일 때 각각 2.06과 2.07이었으며, 상온에서의 유효 자화(4 .pi. $M_{eff}$)값은 10385 emu/$cm^{3}$,10770 emu/$cm^{3}$였다. 자기 이방성을 조사하기 위해 VSM(vibrating sample magnetometer)을 이용하여 측정된 포화자화(4 .pi. $M_{s}$ )값은 16409 emu/$cm^{3}$와 14222 emu/$cm^{3}$였다. 유효 이방성 자기장 $H_{A}$ (effective anisotropy field)과 일축 이방성상수 $K_{u}$ (uniaxial anisotropy constant)는 각각 6024 Oe, 3452 Oe와 3.93 * $10^{6}$ erg/$cm^{3}$, 1.95 * $10^{6}$erg/$cm^{3}$였다. 77K에서 상온까지 온도에 따른 유효 포화 자화(4 .pi. $M_{eff}$)값을 측정하였으며, 포화자화의 온도의존성은 Bloch 법칙을 잘 만족시켰다. 이 포화자화곡선을 최적화하여 Bloch 상수 B, C를 구하였고, 77K에서 0K까지 외삽법으로 구한 $M_{eff}$(0)는 각각 894 erg/$cm^{3}$, 891 erg/$cm^{3}$였으며, 스핀파 경도 상수 D값과 교환 경도 상수 $A_{eff}$는 각각 148 meV .angs. $^{2}$, 103.8 meV .angs. $^{2}$와 1.77 * $10^{-6}$ erg/cm, 0.67 * $10^{-6}$ erg/cm 였다.다.

  • PDF