• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.46-52
• /
• 2011

In the paper, MIMO antenna for LTE 13 band, LTE 7 band wireless communication service is proposed. The proposed antenna is designed where on the top of FR-4(${\epsilon}_r=4.4$, thickness=-.8mm). In proposed structure, two Planar Inverted F Antennas (PIFAs) using meander and folded structure are symmetrically designed for the miniaturization. The isolation between two antennas was also improved by using two slits on the ground plane. The isolation values of the fabricated antenna exhibits -18 dB, -13dB at LTE 13 and LTE 7 band, respectively. The average gain and efficiency are - 4.1 dBi, 41% on LTE 13 band, -1 dBi, 81% on LTE 7 band, respectively. Thus the proposed antenna can be applied to the LTE system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.12
• /
• pp.691-698
• /
• 2014

An L-band single side band(SSB) mixer with CMOS switches and a C-band quadrature voltage-controlled oscillator(QVCO) have been developed using the TowerJazz 0.18-um RFCMOS process. The SSB mixer exhibits a conversion gain of 6.6 ~ 7.5 dB with a 70-dBc image rejection ratio and 65-dBc port isolation. The oscillation frequency range of the QVCO is 6.2 ~ 6.7 GHz with an output power of 4~6 dBm. For measurement, 1.8 V supply voltage is used while drawing 36 mA for the mixer and 23 mA for the QVCO.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.324-329
• /
• 2009

In this paper, a novel Snowflake-shaped microstrip patch antenna for application in the WLAN(5.2/5.8GHz) band is designed and fabricated. The size of antenna is $21.2{\times}16mm^2$ and substrate is used Taconic-RF30. To obtain sufficient bandwidth in Return loss <-10dB and dual resonance characteristic, the Short-pin is inserted on the patch and the coaxial probe source is used. The measured results of fabricated antenna show 220MHz and 135MHz bandwidth in Return loss <-10dB referenced to the WLAN(5.2/5.8GHz) band. The measured antenna gain is $4.7{\sim}6.9dBi$ in the WLAN(5.2/5.8GHz) band. The experimental 3-dB beam width in I-plane and H-plane are $73.2^{\circ}/82.75^{\circ}$ for 5.1500Hz, $74.56^{\circ}/83.63^{\circ}$ for 5.3500Hz, and $86.24^{\circ}/85.15^{\circ}$ for 5.7850Hz, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.89-93
• /
• 2020

In this paper, Ku-band Receiver for compact doppler radar has been designed and fabricated. It composed of MWR(Microwave Receiver) and IFR(Intermediate Frequency Receiver) which have 5 receive path. We applied limiter circuit to protect MWR from Tx leakage power and maximum 2 W. IFR can change the Rx path to broad band or narrow band by MSC(Mode Selection Switch). It is observed that fabricated receiver performs 68 dB gain and 3.7 dB noise figure, 93 ns limiter recovery time. Proposed Ku-band receiver is expected to apply for Ku-band compact doppler radar.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.473-478
• /
• 2015

In this paper, we suggest a flexible multiband antenna which can be equipped on an inflatable life-jacket. The antenna can send distress alert and location data of survivors to assist rescue operation when crew or people are in distress. The antenna operate in three frequency bands such as VHF-DSC band (156MHz), COSPAS-SARSAT band (406MHz) and GPS band (1,575MHz). The GPS band is implemented with a square ring-slot planar antenna, the COSPAS-SARSAT band and the VHF-DSC band antenna is implemented by monopole type. In order to give flexibility of substrate to be equipped on life-jacket, FR4-epoxy substrate of thickness 0.2mm is used to make antenna. The reflection coefficients of the fabricated antenna are -8.8dB, -20.4dB and -10.7dB at each bandwidth like VHF-DSC, COSPAS-SARSAT and GPS band, respectively, when people are wearing life-jacket integrated multiband antenna.

• Korean Journal of Materials Research
• /
• v.19 no.10
• /
• pp.522-526
• /
• 2009

Graphene has been effectively synthesized on Ni/SiO$_2$/Si substrates with CH$_4$ (1 SCCM) diluted in Ar/H$_2$(10%) (99 SCCM) by using an inductively-coupled plasma-enhanced chemical vapor deposition. Graphene was formed on the entire surface of the 500 nm thick Ni substrate even at 700 $^{\circ}C$, although CH$_4$ and Ar/H$_2$ gas were supplied under plasma of 600 W for 1 second. The Raman spectrum showed typical graphene features with D, G, and 2D peaks at 1356, 1584, and 2710 cm$^{-1}$, respectively. With increase of growth temperature to 900 $^{\circ}C$, the ratios of the D band intensity to the G band intensity and the 2D band intensity to the G band intensity were increased and decreased, respectively. The results were strongly correlated to a rougher and coarser Ni surface due to the enhanced recrystallization process at higher temperatures. In contrast, highquality graphene was synthesized at 1000 $^{\circ}C$ on smooth and large Ni grains, which were formed by decreasing Ni deposition thickness to 300 nm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.401-410
• /
• 2014

This paper presents a high-efficiency concurrent dual-band Class-E power amplifier(PA) that is based on a multi-harmonic matching network(MHMN). The proposed MHMN controls the impedance at 1.3 GHz, 2.1 GHz, and their second and third harmonics, respectively, by using transmission lines only rather than switches or lumped components. The dual-band Class-E PA is implemented using Avago ATF-50189 GaAs p-HEMT. The PA exhibits a measured output power of 27.1 dBm and 25.7 dBm, a power gain of 6.1 dB and 4.7 dB, and a drain efficiency of 71.2 % and 60.1 % at 1.3 GHz and 2.1 GHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.933-939
• /
• 2010

In this paper, modified spiral monopole printed antenna for dual band operation in GPS(1.57~1.577 GHz) and WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz) is proposed. To control the frequency ratio of the antenna for dual band operation freely, distance between inner lines of the spiral is diversified by using the different current distribution between basic resonance frequency of spiral monopole antenna and harmonic resonance frequency$(3\lambda_H/4)$. And also the branch line is inserted. Bandwidth(-10 dB) of the antenna is measured 140 MHz(1.47~1.61 GHz) in basic resonance frequency and 420 MHz(2.29~2.71 GHz) in harmonic resonance frequency$(3\lambda_H/4)$. The peak antenna gains are measured 2.825 dBi in GPS(1.57 GHz), and 3.65 dBi in WiBro(2.35 GHz), and 4.564 dBi in WLAN(2.44 GHz).

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.4005-4010
• /
• 2011

We investigated thermal behavior of spin-coated films of P(HB-co-HHx)/PEG blends by using infraredreflection absorption (IRRAS) spectroscopy and 2D correlation spectroscopy. Based on 2D IRRAS correlation spectra, we could determine the sequence of spectral intensity changes with increasing temperature that PEG band changes first and then a band for crystalline component of P(HB-co-HHx) changes before a band for amorphous component. The intensities of bands for PEG and amorphous P(HB-co-HHx) were changed greatly as PEG weigh % of P(HB-co-HHx)/PEG blends increased. Transition temperatures of P(HB-co-HHx)/PEG blends were successfully determined by 2D gradient mapping method. The transition temperature of spincoated films of 98/2 and 90/10 P(HB-co-HHx)/PEG blends and 80/20 P(HB-co-HHx)/PEG blend determined by 2D gradient map are, respectively, about 137.5 and $132.5^{\circ}C$. Furthermore, P(HB-co-HHx)/PEG blends show an additional transition temperature that have been interpreted in terms of different lamellar thicknesses in spin coated films.

• Korean Journal of Weed Science
• /
• v.8 no.2
• /
• pp.199-207
• /
• 1988

The study was intended to know any relations between the rice tolerance to oxyfluorfen and varietal speciation in seed protein composition or any enzymatical allelies with or without chemical treatment. Rice varieties used were Chokoto, Aichiasahi, Agabyeo, IR 3941 and Tablei as the tolerant group, and Mushakdanti, Weld Pally, HP 1033, HP 857, and HP 907 as the susceptible, respectively. Electrophoretic methods used were SDS-PAGE for seed protein, 7% PAGE for isozymes (acid phosphatase and peroxidase from rice seedling) and changes in isoenzyme activity (malate dehydrogenase, peroxidase and esterase) as affected by oxyfluorfen treatment ($10^{-4}M$) was also studied. The results are summarized as follows. -Among 19 bands separated in seed proteins, two different rice groups selected in terms of tolerance were clustered in dissimilarity. This was based on 2 facts in that G band was not present in susceptible varieties and that less activity of H, N, O, P, Q, Rand S band was shown. -Among 4 bands separated in acid phosphatase, the presence of (band and lower activity of B band was specific for tolerant varieties. For 4 minor bands separated in peroxidase, the tolerant varieties had no activity in B band and higher activity in A, C, D bands. -Time-course study of isozymes as affected by $10^{-4}M$ oxyfluorfen showed that Chokoto, the tolerant varieties, had little activity in A band and consistently higher activities in Band C bands for malate dehydrogenase. For 5 bands separated in peroxidase, B band was not found in Chokoto while A, C, D, and E bands were consistently present. Esterase was separated into about 4 bands in which Chokoto had maintained higher activities in A, C and D bands.