• 한국자기학회지
• /
• 제19권3호
• /
• pp.113-119
• /
• 2009

sol-gel 방법을 이용하여 제작된 $^{57}Fe_xCu_{1-x}O$(x = 0.0, 0.02) 분말 시료들에 대한 결정구조 및 초미세 자기적 특성을 X-선 회절(XRD)과 $M{\ddot{o}}ssbauer$ 분광법을 이용하여 조사하였다. XRD 측정 결과 단사(monoclinic) 구조의 CuO 단일상 만이 나타났고, 열처리 온도 상승에 따라 격자상수 값들은 소폭 증가하였다. 또한, 열처리 온도 증가에 따라 $Fe^{3+}$ 스핀들의 정렬과 관련되는 산소 vacancy 농도가 증가하며, 이에 따라 상온에서의 강자성 상의 세기가 증가되었다. Jahn-Teller 효과에 의하여 왜곡된 팔면체 자리에 위치하는 $^{57}Fe$ 이온에 대하여 CuO의 Neel 온도보다 매우 낮은 17 K에서 사중극자 상호작용과 초미세 자기장 상호작용이 동시에 작용하는 조건을 적용하여 분석한 결과, 초미세 자기장 방향은 전기장 기울기 텐서의 세 주축에 대하여 ${\theta}=65^{\circ}$, ${\phi}=0^{\circ}$이고, 비대칭인자 ${\eta}=0.6$으로 나타났다. 그리고 Jahn-Teller 효과에 의한 왜곡으로 비교적 큰 사중극자 분열 ${\Delta}E_Q=-3.67\;mm/s$ 값이 나타났으며, 이성질체 이동 값은 $Fe^{3+}$에 대한 값인 0.32 mm/s으로 얻어졌다. $500^{\circ}C$에서 열처리를 통하여 얻어진 $^{57}Fe_{0.02}Cu_{0.98}O$ 시료에 대하여 17 K에서 취한 $H_{hf}$ 값은 426.94 kOe로 비교적 작은 값으로 얻어졌는데, 이것은 $H_{hf}$에 관계되는 세가지 항 $H_L$, $H_d$, $H_c$ 사이의 온도 의존성 차이에 기인하는 것으로 해석된다.

• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.218-226
• /
• 2018

PURPOSE. The aim of this study was to define a color space of non-vital teeth and to compare it with the color space of matched vital teeth, recorded in the same patients. MATERIALS AND METHODS. In a group of 218 patients, with the age range from 17 to 70, the middle third of the buccal surface of 359 devitalized teeth was measured using a clinical spectrophotometer (Vita Easyshade Advance). Lightness ($L^*$), chromatic parameters ($a^*$, $b^*$), chroma ($C^*$), hue angle (h) and the closest Vita shade in Classical and 3D Master codifications were recorded. For each patient, the same data were recorded in a vital reference tooth. The measurements were performed by the same operator with the same spectrophotometer, using a standardized protocol for color evaluation. RESULTS. The color coordinates of non-vital teeth varied as follows: lightness $L^*$: 52.83-92.93, $C^*$: 8.23-58.90, h: 51.20-101.53, $a^*$: -2.53-24.80, $b^*$: 8.10-53.43. For the reference vital teeth, the ranges of color parameters were: $L^*$: 60.90-97.16, $C^*$: 8.43-39.23, h: 75.30-101.13, $a^*$: -2.36-9.60, $b^*$: 8.36-39.23. The color differences between vital and non-vital teeth depended on tooth group, but not on patient age. CONCLUSION. Non-vital teeth had a wider color space than vital ones. Non-vital teeth were darker (decreased lightness), more saturated (increased chroma), and with an increased range of the hue interval. An increased tendency towards positive values on the $a^*$ and $b^*$ axes suggested redder and yellower non-vital teeth compared to vital ones.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권2호
• /
• pp.188-196
• /
• 2010

The objective of this study was to characterize the litter sizes in Huanghuai goats with high prolificacy (HP, five or more kids born per litter on at least one occasion), and to compare their peripheral blood concentrations of progesterone and estradiol with those of goats with poor prolificacy (PP, up to three kids born per litter on any occasion). The circulating concentrations of progesterone and estradiol were measured by radioimmunoassay from daily blood samples taken during natural estrus cycles and at 1-5 days after ovariectomy. Estrus was synchronized using two doses of a prostaglandin analog. Litter size for the HP goats increased up to a parity of five and decreased thereafter. The percentage of goats with litter sizes of $\geq$4 from parities 3 to 6 ranged from 44.5% to 58.3%. Although small differences in litter size were obtained for goats of parities three, four and six relative to five, parity five does had the highest mean litter size. Progesterone concentrations began to rise earlier and were higher in the HP than in the PP goats on most days of the luteal phase, but not during the follicular phase of the cycle or after ovariectomy. There was a significant difference between the two groups (p<0.05) in the magnitude of the progesterone plateau. Mean estradiol concentrations in the HP group remained significantly higher than in the PP group (p<0.05) during the estrus cycle. There were two estradiol peaks in the HP goats during the early luteal phase, but only one in the PP group. Measurements of individual corpora lutea (CL) in vitro showed that there was a greater prevalence of small CL (<6 mm in diameter) in the HP group than in the PP group (p<0.05). After ovariectomy, the estradiol level on day 1 was significantly higher than at the nadir during the estrus cycle in both the HP (p<0.01) and PP (p<0.05) goats, while levels decreased by 12.3% and 26.2% respectively compared with the mid-luteal period in HP and PP goats (p<0.05). The overall mean estradiol concentrations in HP goats were lower than in the PP group, but no significant differences were found between groups at 1-5 days after ovariectomy.

• 한국의학물리학회지:의학물리
• /
• 제15권1호
• /
• pp.1-8
• /
• 2004

방사선 치료과정에서 가장 중요한 것은 환자에게 조사된 흡수선량을 검증하는 것이다. IMRT에 사용되는 방사선의 물리적 특성을 결정하고 환자에 조사된 선량분포를 검증할 수 있는 정밀한 선량 측정 장치가 필요하다. 본 연구에서 2차원 광자선의 선량검증을 위해 만들어진 BInS (Beam Intensity Scanner)에 관하여 논의한다. BInS에 있는 Scintillator는 광자선이나 전자선에 조사되면 형광을 발생하는 Gd$_2$O$_2$S:Tb를 주성분으로 한다. Scintillator에서 발생된 형광은 디지털 비디오카메라에 의해 수집되어 디지털 신호로 바뀌고 자체 제작한 소프트웨어에 의해 분석되며 상대적인 선량 분포가 3차원 그림으로 표시된다. BInS가 IMRT에서 사용가능한지를 알아보기 위하여 치료에 관련된 몇 가지 측정을 하였다. IMRT의 주요 작동방식 중의 하나인 SMLC (static multileaf collimator) 방식에서는, leaf들의 동작을 통제하여 만들어지는 여러 개의 정적 조사면적(static portal)을 통하여 IMB (intensity modulated beam)이 만들어진다. 따라서 여러 개의 정적 조사면적이 연달아 맞닿아 있는 경우, 연속된 두 조사면적의 경계면에서 penumbra와 산란된 광자들이 겹쳐지고 따라서 hot spot이 생기게 된다. 이와 같이 SMLC 방식에서 나타나는 inter-step hot spot들의 존재를 BInS를 이용하여 측정하여 가시화하였고 또한 그것들을 제거하는 실험적 방법도 제시하였다. IMRT에서 사용되는 다른 주요한 작동방식인 DMLC (dynamic multileaf collimator)는 광자선이나 전자선을 제어하는 leaf의 작동방식이 다르기 때문에 SMLC 방식과는 다른 특성을 보인다. 따라서 BInS를 이용하여 SMLC와 DMLC 방식에 의해 실제로 target에 투사된 선량을 측정 비교하였다. 비록 같은 선량을 target 부위에 투사하기로 계획했을지라도, 실제로는 산란된 광자와 전자들 때문에 DMLC 방식에 의한 선량이 SMLC 방식에 의한 선량보다 14.8%나 큰 것으로 측정되었다.

• Journal of Biosystems Engineering
• /
• 제33권5호
• /
• pp.362-369
• /
• 2008

There is developing interest in precision agriculture in Korea, despite the fact that typical Korean fields are less than 1 ha in size. Describing within-field variability in typical Korean production settings is a fundamental first step toward determining the size of management zones and the inter-relationships between limiting factors, for establishment of site-specific management strategies. Measurements of rice (Oriza Sativa L) yield, chlorophyll content, and soil properties were obtained in a small (100-m by 30-m) Korean rice paddy field. Yield data were manually collected on 10-m by 5-m grids (180 samples with 3 samples in each of 60 grid cells) and chlorophyll content was measured using a Minolta SPAD 502 in 2-m by 2-m grids. Soil samples were collected at 275 points to compare results from sampling at different scales. Ten soil properties important for rice production in Korea were determined through laboratory analyses. Variogram analysis and point kriging with and without median polishing were conducted to determine the variability of the measured parameters. Influence of variogram model selection and other parameters on the interpretation of the data was investigated. For many of the data, maximum values were greater than double the minimum values, indicating considerable spatial variability in the small paddy field, and large-scale spatial trends were present. When variograms were fit to the original data, the limits of spatial dependency for rice yield and SP AD reading were 11.5 m and 6.5 m, respectively, and after detrending the limits were reduced to 7.4 m and 3.9 m. The range of spatial dependency for soil properties was variable, with several having ranges as short as 2 m and others having ranges greater than 30 m. Kriged maps of the variables clearly showed the presence of both large-scale (trend) variability and small-scale variability in this small field where it would be reasonable to expect uniformity. These findings indicate the potential for applying the principles and technology of precision agriculture for Korean paddy fields. Additional research is needed to confirm the results with data from other fields and crops.d similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• Journal of Nutrition and Health
• /
• 제30권2호
• /
• pp.155-169
• /
• 1997

This study investigated the effect of weight control by using the commercial appetite suppressant ((-)-hydroxycitric acid(HCA) formula) and nutrition education on 72 obese women over a period of 8 weeks. During the study it conducted nutritional education for women to control their weight, thus analyzed their changes in anthropometric variables. All obese women were randomized in a double-blind method to consume either HCA(HCA group : experimental group) or placebo(placebo group : control group). Two groups were also divided randomly into 2 groups combined with commercial formula diet in 1 meal a day(HD group and PD group : HCA + gormula diet and placebo + formula diet) or not(HO group and conducted with 4 groups(HD, HO, PD, and PO group). All subjects were assigned to consume 800-1500kcal/d balanced diet which is 500kcal less than their usual energy requirement. To evaluate the effect of the weight control program, weight, percent of body fat, waist and hip circumferences, and 5 skinfold thickness were measured up to 5 times in all obese women. The mean weight of the subjects at the onset of the study was 76.5$\pm$10.6kg. The mean body mass index(BMI) wa 30.1$\pm$3.8 and it was in the upper 5 percentile of mean BMI of Korean women. At the end of the program, mean weight loss was 3.5kg after 2 weeks(p<0.001), and 5.8kg after 4 weeks(p<0.001). The waist, hip ratio(WHR) and skinfold thickness measurements of biceps, triceps, subscapular, suprailiac and abdominum showed significant reduction over the entire study period(p<0.05). These outcome were evaluated by effect of nutritional education and counselling. The reduction of % of body fat was significantly different among the 4 groups. Women who administrated HCA demonstrated more change in weight, BMI than the placebo group. There was also significant reduction in body composition (% of body fat, WHR, and skinfold thickness) than the other groups. The HD group which was administrated HCA combined with formula diet was more decreased than other groups. It showed that this program using commercial HCA and formula diet induced not only a change in weight but also a change in body composition. The outcome of this study suggests that HCA has a more effctive change on weight control which is carried out with nutritional education and counselling.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• 대한원격탐사학회지
• /
• 제25권4호
• /
• pp.383-389
• /
• 2009

TerraSAR-X자료를 이용하여 고해상 X-밴드 SAR시스템을 이용한 조간대 갯벌 관측에의 적용 가능성을 시험하였다. 연구대상지 역은 강화도 남단과 영종도를 잇는 조간대이며, 단일편파자료와 이중편파자료를 이용하였다. 연구내용은 다음과 같은 세 가지로 분류된다. 첫째, X-밴드 영상에서의 연안의 레이더 반사도 특성 연구 및 waterline 추출 정밀도를 평가하였다. 연안지역의 waterline은 HH 편광자료의 레이더 반사도 특성을 통하여 추출하였을 때 가장 신뢰도가 높았으며, TerraSAR-X 시스템의 짧은 파장과 높은 궤도정밀도로 인하여 정밀한 지리좌표로의 변환이 가능하였다. 연구지역의 조간대 지형 경사도는 평균적으로 수평방향으로 60 m당 20 cm의 고도변화를 가지므로, TerraSAR-X HH 편광자료를 이용한 waterline 추출은 정밀한 조간대 DEM 추출로 응용될 수 있다. 둘째, 이중편파자료의 편파특성을 이용한 조간대 영생식물의 산란특성을 관측하였다. 조간대 수륙경계부에서 잘 관측되는 칠면초와 같은 염생식물은 해수면변화에 따른 조간대의 육지화 모니터링에 좋은 표적이 된다. TerraSAR-X 이중편파자료의 산란특성을 이용한 염생식물 관측결과는 2007년에 현장에서 취득된 실측자료와 비교하여 3 dB 이내의 정밀도로 일치하였다. 셋째, 단일편파자료의 레이더 간섭기법을 이용한 조간대 DEM작성을 시도하였다. 조간대 내에서 육지화가 진행된 지역은 표면에 염생식물이 발달하였음에도 불구하고 높은 간섭긴밀도를 나타내었다. 레이더 간섭기법을 통한 DEM의 제작은 일반적인 조간대에서는 적용이 제한적이며, TanDEM-X의 적용이 필요하다.

• 마이크로전자및패키징학회지
• /
• 제7권3호
• /
• pp.45-54
• /
• 2000

Stamped Leadframe에 전해연마를 적용하여 가공면에 존재하는 버어(burr)의 제거와 그에따른 잔류응력 완화효과를 보았다. 또한 표면 청정화에 따른 은(Ag)도금면 및 리드프레임 표면 품질의 향상이 있었다. 인산 60% 전해연마액에 고정 전류값 5A와 극간거리 3.0 cm의 조건하에 Alloy42 원소재 리드프레임은 $70^{\circ}C$에서 120초간, C194 원소재 리드프레임은 $50^{\circ}C$에서 90초간 전해연마 하였다. XRD 반가폭(FWHM)을 이용한 잔류응력 측정결과 전해 연마 처리후의 잔류응력값이 스탬핑 이전상태로 회복되었으며, AFM를 이용하여 표면 거칠기 측정결과 Alloy42원소재 리드프레임은 0.079 $\mu\textrm{m}$, C-194원소재 리드프레임은 0.014 $\mu\textrm{m}$의 R$_{근}$값으로 거칠기의 향상이 있었다. XRF를 이용한 도금두께 측정 결과 0.4~0.5 $\mu\textrm{m}$ 정도 두께편차 균일성의 향상이 있었으며, wire bonding온도에서의 bake test결과 금선(gold wire) 과의 접합강도를 높일수 있는 적절한 크기로의 결정립 성장이 관찰되었다 3차원 자동측정 및 표면 경도 측정 통하여 전해연마로 인한 리드프레임 중요부위 치수변화의 신뢰성을 확인할수 있었다.다.

• Biomolecules & Therapeutics
• /
• 제11권4호
• /
• pp.257-264
• /
• 2003

Carnitine, hydroxycitric acid, and soy peptide have been known to be anti-obesity agents. The purpose of this study was to evaluate the combined effects of carnitine, hydroxycitric acid, and soy peptide mixture as a potential anti-obesity supplement in overweight women. Overweight premenopausal women (n=33; PIBW>110; 20 to 39 years) were randomized into two groups: the placebo group and the functional beverage group (the test group). Functional beverage was composed of 2000 mg soy peptide, 20 mg L-carnitine and 300 mg garcinia(40% hydroxycitric acid). Body weight and 3 day food dimes, biochemical measurements and computerized tomography were measured at baseline and 8-week. After 8-week consumption of functional beverage with usual diet and exercise, body weight fell an average of 1.4 kg (2.1%). Visceral fat area reduced an average of 7.8% at L1($69.6{\pm}8.7\;vs\;64.2{\pm}7.5\;\textrm{cm}^2$) and 5.1% ($60.7{\pm}4.9\;vs\;57.6{\pm}4.8\;\textrm{cm}^2$, p<0.05) at L4level after weight loss in the test group. Calf fat area in the test group showed about 10% reduction ($31.0{\pm}2.7\;vs=\;27.7{\pm}1.7\;\textrm{cm}^2$, p<0.05) after weight loss. These reductions in fat areas were not shown in the placebo group. There were tendencies of increase in serum levels of $\beta-hydroxybutyrate$, acetoacetate, and total ketones in the test group. There were 7% and 17% insignificant increase in fasting free fatty acid (FFA) and response area of FFA during oral glucose tolerance test(OGTT), respectively, in this group. ill addition, little weight loss in the test group showed 8% but not significant reduction in insulin response area during OGTT. In conclusion, this study shows that taking a mixture of carnitine, hydroxycitric acid, and soy peptide as a potential anti-obesity supplement for 8-week produced advantageous changes in the weight and visceral fat accumulation of overweight women.