• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2010

This study was carried out to investigate plow pan characteristics and to grasp the relationship between its particle size distribution fractal dimension ($D_m$) and water transport in paddy plow pan. Twenty four soil sampling sites with different management groups, ordinary and sandy-textured, were selected and investigated for physical properties of soils such as Yamanaka hardness in April, non-submerged condition, before rice seedling transplanting. The plow pan appearing depth and thickness was determined by penetration resistance profile. Undisturbed core samples with five replicates were sampled at plow pan layerwith 2 inch cores for measuring soil bulk density and saturated hydraulic conductivity. The particle size distribution fractal dimension ($D_m$) was calculated by the method following the procedure Tylerand Wheacraft (1992), using the USDA-based particle size analysis datawith fractions of 0-0.002, 0.002-0.053, 0.053-0.1, 0.1-0.25, 0.25-0.5, 0.5-1.0, and 1.0-2.0 mm. The plow pan of investigated fields appeared at a range from 5 to 30 cm depth, showing minimum value in sandy-textured management group and maximum value in ordinary management group. The thickness of plow pan were distributed from 5 to 17 cm, showing both minimum and maximum values in sandy-textured management group. Averagely, the plow appearing depth were deeper in ordinary management group than in sandy-textured management group, whereas the reverse in the thickness of plow pan. The particle size distribution fractal dimension ($D_m$) had higher value with finer textures, with higher fractality in coarser texture. Saturated hydraulic conductivities, $K_s$, of plow pan soils distributed from 0.5 to 1420 mm $day^{-1}$, having the highest value in sandy skeletal soils. The $K_s$ decreased with decreasing clay content and $D_m$, showing power function relationships. The coefficient of determination, $R^2$, of the fitted power functions were higher in $D_m$ as x-axis than in clay content. This means that $D_m$ could give us more effective estimation than clay content. Especially, sandy-textured paddy soils had higher $R^2$, compared to ordinary paddy soils. $K_s$ of relatively coarse-textured soils with less than 18%of clay content, therefore, was more dependent on particle size distribution than that of relatively fine-textured soils. From these results, it could be concluded that the fractal scaling gives us a unique quantity describing particle size distribution and then can be applied to estimate saturated hydraulic conductivity, especially more effective in coarse-textured soils.

• Journal of the Korean Ceramic Society
• /
• v.45 no.12
• /
• pp.772-776
• /
• 2008

The Korea Electric Power Research Institute (KEPRI) has been developing planar solid oxide fuel cells (SOFCs) and power systems for combined heat and power (CHP) units. The R&D work includes solid oxide fuel cell (SOFC) materials investigation, design and fabrication of single cells and stacks, and kW class SOFC CHP system development. Anode supported cells composed of Ni-YSZ/FL/YSZ/LSCF were enlarged up to $15{\times}15\;cm^2$ and stacks were manufactured using $10{\times}10\;cm^2$ cells and metallic interconnects such as ferritic stainless steel. The first-generation system had a 37-cell stack and an autothermal reformer for use with city gas. The system showed maximum stack power of about $1.3\;kW_{e,DC}$ and was able to recover heat of $0.57{\sim}1.2\;kW_{th}$ depending on loaded current by making hot water. The second-generation system was composed of an improved 48-cell stack and a prereformer (or steam reformer). The thermal management subsystem design including heat exchangers and insulators was also improved. The second-generation system was successfully operated without any external heat source. Under self-sustainable operation conditions, the stack power was about $1.3\;kW_{e,DC}$ with hydrogen and $1.2\;kW_{e,DC}$ with city. The system also recuperated heat of about $1.1\;kW_{th}$ by making hot water. Recently KEPRI manufactured a 2kW class SOFC stack and a system by scaling up the second-generation 1kW system and will develop a 5kW class CHP system by 2010.

• The KIPS Transactions:PartA
• /
• v.14A no.2
• /
• pp.85-90
• /
• 2007

This paper presents a facial animation and expression control method that enables the animator to select any facial frames from the facial expression space, whose expression transfer paths the system can setup automatically. Our system creates the facial expression space from approximately 2500 captured facial frames. To create the facial expression space, we get distance between pairs of feature points on the face and visualize the space of expressions in 2D space by using the Multidimensional scaling(MDS). To setup most suitable expression transfer paths, we classify the facial expression space into four field on the basis of any facial expression state. And the system determine the state of expression in the shortest distance from every field, then the system transfer from the state of any expression to the nearest state of expression among thats. To complete setup, our system continue transfer by find second, third, or fourth near state of expression until finish. If the animator selects any key frames from facial expression space, our system setup expression transfer paths automatically. We let animators use the system to create example animations or to control facial expression, and evaluate the system based on the results.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.9-16
• /
• 2007

This paper describe methodology that is distributed on 2-dimensional plane to much high-dimensional facial motion datas using Isomap algorithm, and user interface techniques to control facial expressions by selecting expressions while user navigates this space in real-time. Isomap algorithm is processed of three steps as follow; first define an adjacency expression of each expression data, and second, calculate manifold distance between each expressions and composing expression spaces. These facial spaces are created by calculating of the shortest distance(manifold distance) between two random expressions. We have taken a Floyd algorithm for it. Third, materialize multi-dimensional expression spaces using Multidimensional Scaling, and project two dimensions plane. The smallest adjacency distance to define adjacency expressions uses Pearson Correlation Coefficient. Users can control facial expressions of 3-dimensional avatar by using user interface while they navigates two dimension spaces by real-time.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.134-142
• /
• 2010

A comparative study on the trade-off between the drive current and the total gate capacitance in double-gate (DG) and triple-gate (TG) FinFETs is performed by using 3-D device simulation. As the first result, we found that the optimum ratio of the hardmask oxide thickness ($T_{mask}$) to the sidewall oxide thickness ($T_{ox}$) is $T_{mask}/T_{ox}$=10/2 nm for the minimum logic delay ($\tau$) while $T_{mask}/T_{ox}$=5/1~2 nm for the maximum intrinsic gate capacitance coupling ratio (ICR) with the fixed channel length ($L_G$) and the fin width ($W_{fin}$) under the short channel effect criterion. It means that the TG FinFET is not under the optimal condition in terms of the circuit performance. Second, under optimized $T_{mask}/T_{ox}$, the propagation delay ($\tau$) decreases with the increasing fin height $H_{fin}$. It means that the FinFET-based logic circuit operation goes into the drive current-dominant regime rather than the input gate load capacitance-dominant regime as $H_{fin}$ increases. In the end, the sensitivity of $\Delta\tau/{\Delta}H_{fin}$ or ${{\Delta}I_{ON}}'/{\Delta}H_{fin}$ decreases as $L_G/W_{fin}$ is scaled-down. However, $W_{fin}$ should be carefully designed especially in circuits that are strongly influenced by the self-capacitance or a physical layout because the scaling of $W_{fin}$ is followed by the increase of the self-capacitance portion in the total load capacitance.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.211-223
• /
• 1994

In fermentations with a 4-liter stirred tank bioreactor, a better than two-fold enhancement of the gas-liquid mass transfer coefficient$(k_La)$ in the celite-immobilized fungal cultures of Tolypocladium in flatum over the parallel conventional free-cell was observed at identical biomass concentrations, despite the higher specific oxygen uptake rate of the immobilized fungi during exponential growth. As a result oxygen sufficient conditions, i. e., dissolve oxygen(D.O.) concentrations exceeding 75% air saturation, could be maintained throughout exponential growth period of the immobilized culture, in contrast to the suspended fungal culture, whose D.O. levels fell below 50% air saturation. A linear monotonic dependence of $k_La$ upon impeller agitaion rate was found for both immobilized and conventional cultivation modes over a range of 250 to 550rpm, the slope being a function of biomass concentration for the free but not for the immobilized cell system In contrasts oxygen transfer rate was a much weaker function of aeration rate up to about 2.5 vvm for both culture configurations. Above this level, aeration rate had no further effect on the mass transfer. In addition, the immobilized cultures sustained good morphological and physiological states, leading to almost two times higher cyclosporln A (CyA) productivity overt the parallel free cell system. These experiments suggest that the celite-immobilized fungal system in a stirred tank reactor has considerable promise for scaling up cyclosporin A production in terms of high-density cultivation.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.53-58
• /
• 2018

Since the scaling-down of IC devices has been reached to their physical limitations, several innovative packaging technologies such as 3D packaging, embedded packaging, and fan-out wafer level packaging (FOWLP) are actively studied. In this study the fabrication of organic-inorganic dielectric material was evaluated for the use of multi-structured redistribution layers (RDL) in FOWLP. Compared to current organic dielectrics such as PI or PBO an organic-inorganic hybrid dielectric called polysilsesquioxane (PSSQ) can improve mechanical, thermal, and electrical stabilities. polysilsesquioxane has also an excellent advantage of simultaneous curing and patterning through UV exposure. The polysilsesquioxane samples were fabricated by spin-coating on 6-inch Si wafer followed by pre-baking and UV exposure. With the 10 minutes of UV exposure polysilsesquioxane was fully cured and showed $2{\mu}m$ line-pattern formation. And the dielectric constant of cured polysilsesquioxane dielectrics was ranged from 2.0 to 2.4. It has been demonstrated that polysilsesquioxane dielectric can be patterned and cured by UV exposure alone without a high temperature curing process.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.4
• /
• pp.281-288
• /
• 2010

In this study, we investigated anti-oxidative effects of Duchesnea indica extracts by using Oxygen Radical Absorbance Capacity (ORAC). The extracts were prepared with 0 %, 30 %, 50 %, 70 % and 100 % aqueous ethanol respectively. The 30 % EtOH D. indica extract showed higher ORAC activity than the other extracts. Therefore, we performed in vitro studies on cytotoxicity of NIH-3T3 cells and MMP-8 collagenase inhibition using by the 30 % EtOH extract. The 30 % EtOH extract showed no cytotoxicity and significant inhibition on MMP-8 collagenase. And we performed clinical studies for the anti-wrinkle effect of the Di-Wrinkle Free Cream. The cream formula was prepared with 2 % arbutin and 1 % D. indica extract. Twenty one healthy women volunteers, ages of 35 and 50, applied the cream on their faces twice a day for 8 weeks. The skin was evaluated with PRIMOS (phaseshift rapid in vivo measuring of human skin) system and analyzed by the student's paired t-test. The wrinkles on the eye region were reduced by 13 % based on the PRIMOS system after 8 weeks. In the safety study of the Di-Wrinkle Free Cream, no symptoms were observed such as erythema, edema, scaling, itching, stinging, burning, tightness and prickling by visual observation and medical examination of volunteers for 8 weeks. Moreover, there was no noticeable skin disorder during experience period. These results suggested that D. indica extracts could be applied as cosmeceuticals effective for anti-wrinkle.

• Journal of Periodontal and Implant Science
• /
• v.44 no.2
• /
• pp.71-78
• /
• 2014

Purpose: Host modulatory therapy has been proposed as a treatment for periodontal diseases. A class of herbal medicines, known to be immunomodulators, alters the activity of immune function through the regulation of informational molecules such as cytokines. In the current study, we tested the hypothesis that herbal immunomodulator drugs act as an adjuvant to scaling and root planing (SRP) in alleviating periodontal inflammation by improving clinical and biochemical parameters. Methods: Sixty healthy subjects (30 in each group) with moderate and severe chronic periodontitis were enrolled in a double-blind, placebo-controlled, double-masked randomised controlled trial. The control group was treated with SRP and a placebo, whereas the test group was treated with SRP followed by dietary supplementation of Septilin for 3 weeks. Periodontal clinical parameters and serum C-reactive protein (CRP) levels were evaluated for all patients at the baseline, 3 weeks, and 6 weeks. Results: Improved gingival index scores found in the test group as compared to the control group were found to be statistically significant only after 3 weeks (P<0.001). In contrast, the decrease in the sulcus bleeding index and pocket depth scores was statistically highly significant in the test group as compared to the control group after 3 weeks and 6 weeks (P<0.001). However, reduced clinical attachment level and CRP scores, as reflected in the test group as compared to the control group, were not found to be statistically significant after both 3 weeks (P>0.05) and 6 weeks (P>0.05). Conclusions: The results of this clinical-biochemical study suggest that dietary supplementation with herbal immunomodulatory agents may be a promising adjunct to SRP and may aid in improving periodontal treatment outcomes.

• The Korean Journal of Rehabilitation Nursing
• /
• v.6 no.2
• /
• pp.183-191
• /
• 2003

Purpose: To examine the effect of the solution-focused group counseling program on the nursing students' problem-solving capacity. Methods: The research design was one-group pretest-posttest design in quasi-experimental research. The subjects were 16 sophomore nursing students being in K university located in D city, Korea. The period of this research was from January 9 to February 20, 2002, from January 10 to February 21, 2003. The group counseling program that was developed by Kim, Hyeon Mi (2001) on the basis of the fundamental principles of solution-focused therapy of de Shazer, et al. (1986) and the solution-focused group counseling process proposed by Selekman (1991), LaFountain, et al. (1996) and Metcalf (1998) was used after being modified and complemented for the nursing students. The group counseling was carried out six times for 120 minutes per week. The instruments used for this study were the Problem Solving Inventory developed by Heppner and Petersen (1982) and Scaling question. Collected data were analyzed by paired t-test with SPSS program. Results: 1) Problem solving capacity increased after solution-focused group counseling program, but a significant difference was not revealed(t=0.835, p=0.057). 2) The scores of self-confidence with the problem-solving were significantly increased when it was compared with the 1st and the 6th(t=3.587, p=0.001). Conclusion: It seems that the solution-focused group counseling program should be considered as an effective nursing intervention program for the nursing students by improving self-confidence with the problem-solving. As a results, this study suggests that the specific techniques used in the solution focused therapy should be applied actively in areas of counseling and communication training for the nursing students and nurses.