• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.92-97
• /
• 2008

In this Paper, we present a scaling theory for dual material surrounding gate (DMSGTs) MOSFETs, which gives a guidance for the device design and maintaining a precise subthreshold factor for given device parameters. By studying the subthreshold conducting phenomenon of DMSGTs, the effective conductive path effect (ECPE) is employed to acquire the natural length to guide the design. With ECPE, the minimum channel potential is used to monitor the subthreshold behavior. The effect of ECPE on scaling factor significantly improves the subthreshold swing compared to conventional scaling rule. This proposed model offers the basic designing guidance for dual material surrounding gate MOSFETs.

• Journal of Korea Foundry Society
• /
• v.1 no.2
• /
• pp.2-9
• /
• 1981

Graphite spheroidization and scaling resistance of cast iron containing 5-10% Al were investigated. It is impossible to obtain spheroidal graphite in cast iron containing Al with 8 % and over, but possible to obtain spheroidal graphite even in cast iron with an Al content of about 10 % by increasing Si content. In the scaling test carried out under the heating condition of $950^{\circ}C$ in air for total of 50 hours, the scaling resistance of cast iron containing Al with 8 % and over was remarkably superior, and also spheroidal graphite cast iron was superior to flake graphite cast iron. The scale became thinner more compacts and more protective with increasing Al content.

• The Journal of the Korea Contents Association
• /
• v.9 no.5
• /
• pp.166-173
• /
• 2009

The purpose of this study was to examine the satisfaction level of patients with oral health care provided by a dental hospital, especially scaling, and their oral health behavior. The subjects in this study were 263 college students who were in their 20s and selected from among patients who visited D university dental hospital in Gangwon Province during the oral prophylaxis practice of dental hygiene sophomores and juniors. The findings of the study were as follows: 1. Whether the selected students had ever had their teeth scaled was checked, and those who had outnumbered the others who hadn't. The rates of the former and latter respectively stood at 61.2 percent and 38.8 percent. Regarding places where they got their teeth scaled, the majority of the students that represented 75.2 percent did that at dental clinics. By gender, 34.4 percent of the male students did that at schools, which were larger than 11.8 percent of the female students who did. 88.2 percent of the female students did that at dental clinics, which were larger than 65.5 percent of the male students who did. Gender made significant differences to that(x2=10.79, p<.01). 2. As for satisfaction level with scaling by gender, the male students (38.7%) who had no specific idea outnumbered the female students (26.5%) who did. The female students(57.4%) who felt no pain during scaling outnumbered the male students(55.9%) who did. Gender made a significant difference to their responses. (x2=6.38, p<.05). 3. Concerning the use of oral hygiene supplies, most of the students who represented 72.2 percent had never flossed their teeth, and as many as 86.3 percent had never used a tongue cleaner. But the gaps between them and the others were not statistically significant.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.796-803
• /
• 2008

In this paper, we present a depth scaling method for multiview images that could provide an 3D depth that a user prefers. Unlike previous works that change a camera configuration, the proposed method utilizes depth data in order to carry out the scaling of a depth range requested by users. From multivew images and their corresponding depth data, depth data is transformed into a disparity and the disparity is adjusted in order to control the perceived depth. In particular, our method can deal with multiview images captured by multiple cameras, and can be expanded from stereoscopic to multiview images. Based upon a DSCQS subjective evaluation test, our experimental results tested on an automultiscopic 3D display show that the perceived depth is appropriately scaled according to user's preferred depth.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.69-79
• /
• 1994

The conventional machine vision system which has uniform rectangular grid requires tremendous amount of computation for processing and analysing an image especially in 2-D image transfermations such as scaling, rotation and 3-D reconvery problem typical in robot application environment. In this study, the imaging system with nonuiformly distributed image sensors simulating human visual system, referred to as Ploar Exponential Grid(PEG), is compared with the existing conventional uniform rectangular grid system in terms of image resolution and computational complexity. By mimicking the geometric structure of the PEG sensor cell, we obtained PEG-like images using computer simulation. With the images obtained from the simulation, image resolution of the two systems are compared and some basic image processing tasks such as image scaling and rotation are implemented based on the PEG sensor system to examine its performance. Furthermore Fourier transform of PEG image is described and implemented in image analysis point of view. Also, the range and heading-angle measurement errors usually encountered in 3-D coordinates recovery with stereo camera system are claculated based on the PEG sensor system and compared with those obtained from the uniform rectangular grid system. In fact, the PEC imaging system not only reduces the computational requirements but also has scale and rotational invariance property in Fourier spectrum. Hence the PEG system has more suitable image coordinate system for image scaling, rotation, and image recognition problem. The range and heading-angle measurement errors with PEG system are less than those of uniform rectangular rectangular grid system in practical measurement range.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.

• Explosives and Blasting
• /
• v.9 no.1
• /
• pp.3-13
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2334-2337
• /
• 2022

Deuterium-tritium reaction is the most promising one in term of the highest nuclear fusion cross-section for the reactor. So it is one of urgent issues to develop materials and components that are simultaneously resistant to high heat flux and high energy neutron flux in realization of the fusion energy. 2.45 MeV neutron production was reported in D-D reaction in KSTAR and regarded as beam-target is the dominant process. The feasibility study of KSTAR to wide area neutron source facility is done in term of D-D and D-T reactions from the empirical scaling law from the mixed fast and thermal stored energy and its projection to cases of heating power upgrade and DT reaction is done.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.9
• /
• pp.993-1004
• /
• 2004

We propose the method for kinematic and dynamic modeling and Path-tracking of four-wheeled mobile robots with 2 d.o.f having the limited drive-torques. Controllability of wheeled-mobile robots is revealed by using the kinematic model. Instantaneously coincident coordinate system, force/torque propagation and Newton's equilibrium law are used to induce the dynamic model. When drive-torques generated by inverse dynamics exceed the limitation, we make wheeled-mobile robots follow the reference path by modifying the planned reference trajectory with time-scaling. The controller is introduced to compensate for error owing to modeling uncertainty and measurement noise. And simulation results prove that the method proposed by this paper is efficient.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.990-992
• /
• 1996

The design of I/O scaling factors for fuzzy controller system is proposed in this paper. The proposed method is for nonlinear input scaling factor and variable output scaling factor. The fuzzy controller is evaluated by computer simulation on the 1st order process and 2nd order process. Simulation results showed robust characteristics for variable reference signal.