• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.92-101
• /
• 1997

In this paper, modeling methods for 2D joints are proposed. Earlier methods for modeling 2D joints that use geometric relationships may not consider irregularities or dynamic effects of joints. In any case, it is important to consider irregularities or dynamic effects. To consider those, methods that use dynamic contacts are proposed. With the method, 2D joints that have irregularities or dynamic effects amy be model- ed and analyzed. 2D joints that are developed are revolute, translational, gear and point-follower joint.

• Computers and Concrete
• /
• 제15권5호
• /
• pp.807-831
• /
• 2015

In the previous analytical studies on 2D reinforced concrete (RC) beam-column joints, the modified compression field theory (MCFT) and the strut-and-tie method (STM) are usually employed. In this paper, the limitations of these analytical models for RC joint applications are reviewed. Essentially for predictions of RC joint shear behaviour, the MCFT is not applicable, while the STM can only predict the ultimate shear strength. To eliminate these limitations, an improved STM is derived and applied to some commonly encountered 2D joints, viz., interior and exterior joints, subjected to monotonic loading. Compared with the other STMs, the most attracting novelty of the proposed improved STM is that all critical stages of the shear stress-strain relationships for RC joints can be predicted, which cover the stages characterized by concrete cracking, transverse reinforcement yielding and concrete strut crushing. For validation and demonstration of superiority, the shear stress-strain relationships of interior and exterior RC beam-column joints from published experimental studies are employed and compared with the predictions by the proposed improved STM and other widely-used analytical models, such as the MCFT and STM.

• 한국강구조학회 논문집
• /
• 제8권4호통권29호
• /
• pp.3-17
• /
• 1996

The purpose of this paper is to investigate experimentally and theoretically the strength and deformation of K-joints in welded Warren-type square hollow structural section truss. There are 2 types in K-joints in K-joints having one compression bracing member and one tension bracing member. One type is KP-series that brae members are rotated to $45^{\circ}$, another type is KS-series that are not rotated. Principal parameters are the ratio of the chord width to thickness (D/T=33.3, 25, 16.7), the ratio of brace width to chord width(d/D=0.4, 0.5, 0.67, 0.83, 1.0) and the ratio of eccenticity to chord height (e/D=0.25, 0.125, 0, -0.125, -0.25, -0.375, -0.5). The important results obtained from the experiments are as follow ; The strength of K-joints increase proportionally as the D/T ratio decreases, and the d/D ratio increases. But the e/D ratio has no correlation with the strength of K-joints. Generally the strength and ductility ratio of KP-series increase more than a current type(KS-series) in full ${\beta}$range.

• 복식문화연구
• /
• 제8권4호
• /
• pp.587-601
• /
• 2000

The purpose of this study : 1. The total 56 range measurements of active dynamic motion of 40 subjects (20's and 30's) were measured using 3-D dynamic motion analysis system. 2. Various comparisons were performed for the right and left side, male, age groups (20's, 30's, and 40's ∼ 60's) using previous studies. The results were compared with the other studies in the aspects of age. In this study, the 3-D motion analysis system based on photogrammetry was established and used to analyze the human's motion and posture. The system consists of VICON 140, data acquisition system, and data analysis program (KRISSMAS). The result of this study were as follows : 1. Comparing 20's with 30's the result shows that 30's have larger ROM at some joints, which is inconsistent with the previous result. The reason is that female subjects in 20's were improperly sampled according to the representatives of anthropometry characteristics. 2. There are significant differences in some joints related with age. 20's male subjects have more flexible joints in the neck while 30's male subjects have more flexibility in their shoulder joint and elbow joint. But most of the significances were not high (p〈0.05). The prediction that the right side of Korean bodies would be more flexible was not a good hypothesis. And the joints flexibilities are not correlated with Rohrer's Index.

• 지질공학
• /
• 제31권3호
• /
• pp.357-366
• /
• 2021

암석의 절리면 거칠기 형상에 따른 전단거동은 지반 및 암반 구조물 안정성에 큰 영향을 미칠 수 있다. 암반 구조물에 대한 설계를 효율적으로 하기 위해서는 절리에 의한 전단거동을 이해하고 정확하게 전단강도를 산정하는 것이 필요하다. 이 연구에서는 암석 절리면 거칠기의 전단거동을 알아보기 위해 Barton and Choubey(1977)가 제안한 10가지 형태의 표준 절리 프로파일 중 절리면 거칠기가 매끄러운 1번(JRC-1)과 거칠기 비교적 큰 7번(JRC-7)과 9번(JRC-9)에 대해 PFC2D를 이용한 수치전단시험을 수행하였다. 그 결과 최대 전단응력은 절리면의 거칠기 진폭이 큰 JRC-7과 JRC-9가 매끈한 JRC-1보다 약 3.2~5.0배 크게 나타났다. 최대 전단변위는 첫 번째 수직응력일 때가 두 번째일 때보다 약 4.1~5.8배 크게 나타났다. 절리면 마찰각은 절리면의 거칠기 진폭이 큰 JRC-7과 JRC-9가 매끈한 JRC-1보다 약 1.8~3.9배 크게 나타났다. 결론적으로 절리면의 거칠기가 커질수록 최대 전단응력과 절리면 마찰각은 증가하는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.555-572
• /
• 2015

This paper presents an experimental study of three two-dimensional (2D/planar) steel reinforced concrete (SRC) T-shaped column-RC beam hybrid joints and six 3D SRC T-shaped column-steel beam hybrid joints under low cyclic reversed loads. Considering different categories of steel configuration types in column cross section and horizontal loading angles for the specimens were selected, and a reliable structural testing system for the spatial loading was employed in the tests. The load-displacement curves, carrying capacity, energy dissipation capacity, ductility and deformation characteristics of the test subassemblies were analyzed. Especially, the seismic performance discrepancies between planar hybrid joints and 3D hybrid joints were intensively compared. The failure modes for planar loading and spatial loading observed in the tests showed that the shear-diagonal compressive failure was the dominating failure mode for all the specimens. In addition, the 3D hybrid joints illustrated plumper hysteretic loops for the columns configured with solid-web steel, but a little more pinched hysteretic loops for the columns configured with T-shaped steel or channel-shaped steel, better energy dissipation capacity & ductility, and larger interlayer deformation capacity than those of the planar hybrid joints. Furthermore, it was revealed that the hysteretic loops for the specimens under $45^{\circ}$ loading angle are generally plumper than those for the specimens under $30^{\circ}$ loading angle. Finally, the effects of steel configuration type and loading angle on the seismic damage for the specimens were analyzed by means of the Park-Ang model.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.157-162
• /
• 2010

This paper describes the thermal fatigue life prediction models for 95.5Sn-4.0Ag-0.5Cu solder joints of Flip chip package considering Under Bump Metallurgy(UBM). A 3D Finite element slice model was used to simulate the viscoplastic behavior of the solder. For two types of solder bump pitches, simulations were analyzed and the effects of underfill packages were studied. Consequently, it was found out that solder joints with underfill had much better fatigue life than solder joints without underfill, and solder joints with $300{\mu}m$ bump pitch had a longer thermal fatigue life than solder joints with $150{\mu}m$ bump pitch. Through the simulations, flip chip with lead-free solder joints should be designed with underfill and a longer bump pitch.

• Steel and Composite Structures
• /
• 제1권2호
• /
• pp.245-268
• /
• 2001

The analysis of steel-concrete composite joints presents some particular aspects that increase their complexity when compared to bare steel joints. In particular, the influence of slab reinforcement and column concrete encasement clearly change the moment-rotation response of the joint. Starting from an energy approach developed in the context of steel joints, an extension to composite joints is presented in this paper that is able to provide closed-form analytical solutions. In addition, the possibility of tri-linear or non-linear component behaviour is also incorporated in the model, enabling adequate treatment of the influence of cracked concrete in tension and the softening response of the column web in compression. This methodology is validated through comparison with experimental tests carried out at the University of Coimbra.

• 한국정보통신학회논문지
• /
• 제19권5호
• /
• pp.1199-1206
• /
• 2015

본 논문은 위상분석 기법을 이용하여, 스켈레톤의 크기, 조인트의 개수, 조인트 이름이 다른 모션들에 대한 유사도를 자동으로 계산하는 알고리즘을 제안한다. 제안하는 알고리즘은 스켈레톤의 계층구조와 기본포즈를 분석하여 k 개의 조인트 그룹으로 자동 분류하며, 분류된 조인트 그룹은 조인트의 전역 위치를 이용한 포인트 클라우드로 변환된다. 이 때, 비교 대상이 되는 각 그룹의 포인트 클라우드 내 포인트의 위치는 스켈레톤의 크기를 고려하여 자동으로 조정되며, 포인트 개수 또한 자동으로 일치하게 된다. 비교 대상이 되는 두 포인트 클라우드들은 유사도 계산을 위해 거리 값을 최소로 하는 최적의 2D변환 행렬을 구하게 되며, 이 행렬을 적용 후 나타나는 포인트 간의 거리의 합을 최종 유사도 값으로 결정한다. 실험을 통해, 제안하는 알고리즘은 스켈레톤의 크기, 조인트의 개수, 조인트 이름에 상관없이 유사도 값을 계산해 줌을 알 수 있었다.

• 한국동물생명공학회지
• /
• 제37권4호
• /
• pp.246-254
• /
• 2022

Current studies have revealed the capacity of mesenchymal stem cells (MSCs) in term of immunomodulatory properties, and this distinct potential is downgraded according to the disease duration of patients-derived MSCs. In order to enhance the immunomodulatory and anti-tumorigenic properties of the rheumatoid arthritis (RA) joints-derived MSCs, we aggregate synovial fluid-derived MSCs from RA joints (RA-hMSCs) into 3D-spheroids by the use of hanging drop culture method. Cells were isolated from synovial fluids of RA joints with longstanding active status over 13 years. For aggregation of RA-hMSCs into 3D-spheroids, cells were plated in hanging drops in 30 μL of advanced DMEM (ADMEM) containing 25,000-30,000 cells/drop and cultured for 48 h. To analyze the comparative immunomodulatory effects of 3D-spheroid and 2D monolayer cultured RA-hMSCs and then cells were cultured in ADMEM supplemented with 20% of synovial fluids of RA patients for 48 h and were evaluated by qRT-PCR for their expression of mRNA levels of inflammatory and anti-inflammatory markers. Cellular aggregation of RA-hMSCs was observed and cells were aggregate into a single sphere. Following treatment of RA patient's synovial fluids into the RA-hMSCs, spheroids formed RA-hMSCs showed significantly (p < 0.05) higher expression of TNFα stimulated gene/protein 6 (TSG-6) than the monolayer cultured RA-hMSCs. Therefore, the 3D-spheroid culture methods of RA-hMSCs were more effective than 2D monolayer cultures in suppressing inflammatory response treated with 20% of RA-synovial fluids by expression of TNFα (TSG-6) according to the immune response and enhanced secretion of inflammatory factors.