• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.1
• /
• pp.7-13
• /
• 2005

In this paper, we propose the time synchronization module on fiber optic repeater to use optic line delay for obtaining time synchronization between up-link and down-link, in the 2.3 GHz WiBro network using TDD/OFDM (Time Division Duplex/Orthogonal Frequency Division Multiplexing) Generally, when we use fiber optic repeater to remove the shade area, it occurs transmission delay which is caused by optic transmission between RAS (Radio Access Station) and fiber optic repeater and inner delay of fiber optic repeater. Because the WiBro system is adopting a TOO method and there exists the difference of switching time which is caused by these delay between up-link and down-link, it occurs ISI (Inter Symbol Interference), ICI (Inter Carrier Interference). These interference results in the reduction of the coverage. And the inconsistency between Up-Link and Down-Link switching time maybe gives rise to the interruption of communication. In order to prevent these cases, we propose synchronization module using analog optic line delay as the one of synchronizing up-link and down-link. And we propose the consideration factor for the designing time synchronization module and the feature of optic line of analog method. The measurement result of optic line time synchronization module of structure proposed is as follows, the delay error of $0.5{\mu}g$ and the insertion loss value below maximum 4.5dB in range of $0{\sim}40{\mu}s$. These results fully meet the specification of WiBro System.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2151-2156
• /
• 2006

Beamforming for underwater acoustic communication (UAC) is affected by the broadband feature of UAC signal, which has relatively low currier frequency as compared to the signal bandwidth. The narrow-band assumption does not hold good in UAC. In this paper, we discuss a broadband FIR beamformer for UAC using the baseband equivalent way signal model. We consider the broadband FIR beamformer for QPSK UAC with carrier frequency 25kHz and symbol rate 5kHz. Array geometry is a uniform linear way with 8 omni-directional elements and sensor spacing is the half of the carrier wavelength. The simulation results show that the broadband n beamformer achieves nearly optimum signal to interference and noise ratio (SINR) and outperforms the conventional narrowband beamformer by SINR 0.5dB when two-tap FIR filter is employed at each sensor and the inter-tap delay is a quarter of the symbol interval. The broadband FIR beamformer performance is more degraded as the FIR filter length is increased above a certain value. If the inter-tap delay is not greater than half of the symbol period, SINR performance does not depend on the inter-tap delay. More training period is required when the inter-tap delay is same as the symbol period.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.6-8
• /
• 2009

In this paper. we propose receiver algorithms for VHF(Very High Frequency) digital link mode-2(VDL Mode-2) systems. Unlike conventional digital communication systems using the root raised cosine filter as a transmit and receive filter, raised cosine filter is used as a transmit filter in VDL Mode-2 systems. Hence, it is crucial to design and implement the optimum lowpass receive filter by considering the amount of inter-symbol interference and noise performance. On the other hand, due to the short preamble pattern, it is crucial to develop an efficient packet detection algorithm for reliable communication link. In this paper, we design the optimum receive filter and packet detection algorithm and evaluate the performance of receiver adopting the proposed receive filter and packet detection algorithm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.11-16
• /
• 2017

Multi-level holographic data storage requires modulation codes for avoiding two dimensional inter-symbol interference (2D-ISI). Modulation codes can remove the fatal ISI pattern of neighboring the largest and the smallest symbols. In this paper, we propose a 4-level 4/6 modulation code and its trellis encoding for error correction. The proposed 4/6 modulation code prevents that the symbol 0 and 3 are not adjacent in any direction. Also, we compare the proposed modulation code with the same code rate modulation codes for four-level holographic data storage.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.10-14
• /
• 2015

In holographic data storage systems, data is recorded and read by page on a volume of storage medium, and it can increase transmission rate and storage capacity because of two-dimensional page-oriented data processing by charge-coupled devices. However, HDS suffers two-dimensional intersymbol interference unlike conventional data storages. In this paper, we propose a preprocessing method of decreasing ISI before read data in HDS pass to detector. This method has some advantage when we collaborate with the preprocessing for reducing misalignment error and modulation code.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.1-5
• /
• 2012

At the present time when the limits of the magnetic storage systems appear, the holographic data storage (HDS) devices with high data transfer rate and high recording density are emerging as attractive candidates for next-generation optical storage devices. In this paper, to effectively improve the detection performance that is degraded by the two-dimensional inter-symbol interference under the HDS channel environment and the pixel misalignment, an iterative two-dimensional equalization scheme is proposed based on the contraction mapping theorem. In order to evaluate the performance of the proposed scheme, for various holographic channel environments we measure the BER performance using computer simulation and compare the proposed one with the conventional threshold detection scheme, which verifies the superiority of the proposed scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.3-8
• /
• 2013

Bit patterned media (BPM) storage is one of the promising technologies to overcome the limitations of the conventional magnetic recording. However, there are some problems in a high areal density BPM storage, inter-track interference, inter-symbol interference and noise which are severely degrading performance of the system with reducing the bit error rate. In this paper, we present a simple iterative two-dimensional equalizer based on the contraction mapping theorem to mitigate these adverse effects. Furthermore, we examine that the channel characteristics of the proposed two-dimensional equalizer satisfies the convergence conditions. In the simulation we demonstrate the bit separation characteristics of the one-dimensional equalizer and the two-dimensional equalizer and evaluate the BER performance of the proposed equalizer comparing with the conventional equalizers. According to the results of experiments, the proposed equalizer is an promising equalizer with maintaining proper complexity for a high areal density BPM storage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.669-677
• /
• 2003

A new Modem technique - 8SQAM(8-state Superposed Quadrature Amplitude Modulation) - for use in power and bandwidth limited digital communication system is proposed. 8SQAM is free of inter-symbol interference(ISI) and generates output signals which have a smooth and continuous phase transition and a reduced envelope fluctuation by keeping correlation between amplitudes and phases of two subsequent symbols. Accordingly, 8SQAM, as compared with a conventional 8PSK, is influenced a little by ISI and inter-modulation(IM) caused by nonlinear distortions. In this paper, the performance of the 8SQAM system, in a nonlinearly amplified channel impaired by additive white Gaussian noise(AWGN), ISI and IM, is analyzed via computer simulation. The simulation result shows that 8SQAM outperforms 8PSK with roll-off value of $\alpha$=0.25 by 2.5dB in CNR to maintain BER=1$\times$10$^{-4}$ when input back-off(IBO) of HPA is 3dB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.10
• /
• pp.28-33
• /
• 2009

In this paper, we propose the receiver algorithms suitable for the VHF (Very High Frequency) digital link mode-2(VDL Mode-2) system. Unlike conventional digital communication systems using the root raised cosine filter as a transmit and receive filter, raised cosine filter is used as a transmit filter in the VDL Mode-2 system. Hence, it is crucial to design and implement the optimum lowpass receive filter by considering inter-symbol interference and noise performance. On the other hand, due to the short preamble pattern, it is crucial to develop an efficient packet detection algorithm for reliable communication link for the VDL Mode-2 system. Also, frequency offset due to the carrier frequency difference between transmitter and receiver and doppler frequency shift must be estimated and compensated for reliable communication. In this paper, the optimum receive filter, packet detection and frequency offset compensation algorithms are proposed and the performance of the VDL system employing the proposed algorithms are evaluated.