• Korean Journal of Human Ecology
• /
• v.15 no.3
• /
• pp.481-490
• /
• 2006

Adjusting pressure level in the construction of athletes' tight-fitting garments by reducing the elastic knit pattern is a challenging subject, which influences the performance of the wearer directly. Therefore, in this study, relationship between the reduction rates of the basic pattern obtained from 3D human scan data and resultant clothing pressure was explored to improve the fit and pressure exerted by clothing. 3D scan data were obtained using Cyberware and they were transformed into a flat pattern using software based on Runge-Kutta method. Reduction rate was examined by subjective wear test as well as objective pressure measurement. As a result, difference in the length between the original 3D body scan data and the 2D tight-fitting pattern was 0.02$\sim$0.50cm (0.05$\sim$1.06%), which was within the range of tolerable limits in making clothes. Among the five garments, the 3T-pattern was superior in terms of subjective sensation and fit. The pressure of the 3T pattern was 2$\sim$4 gf/cm2 at five locations on the body, which is almost the same or a bit higher than that of Z-pattern. In the case of tight-fitting overall garment, the reduction rate of the pattern in the wale direction is more critical to the subjective sensation than the course direction. It is recommended that the reduction grading rules of course direction should be larger than that of Ziegert for a better fit of tight-fitting garments. In the case of wale direction, however, reduction grading rule should be kept the same as suggested earlier by Ziegert (1988).

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.2
• /
• pp.285-301
• /
• 2019

Let $p_1$ and $p_2$ be two distinct odd primes with gcd($p_1-1$, $p_2-1$) = 6. In this paper, we compute the linear complexity of the first class two-prime Whiteman's generalized cyclotomic sequence (WGCS-I) of order d = 6. Our results show that their linear complexity is quite good. So, the sequence can be used in many domains such as cryptography and coding theory. This article enrich a method to construct several classes of cyclic codes over GF(q) with length $n=p_1p_2$ using the two-prime WGCS-I of order 6. We also obtain the lower bounds on the minimum distance of these cyclic codes.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.457-467
• /
• 2016

This study aimed to develop functional underwear for elderly women in their sixties in terms of good fit, wear comfort and body temperature regulation. To satisfy elderly women's physical and metabolical needs, an automatic temperature control system via PCM treatment was applied. Underwear pattern was produced by producing body surface replica, which was derived from 3D body parametric model. Differential ratios of outline length and area between 3D surface and 2D plane were 1.4% and 0.5%, respectively. The reduction rate was determined as 10% through the expert's evaluation. PCM treated fabric showed higher Q-max, meaning that it can facilitate the thermal transition in hot situation. Moreover, it also showed higher insulation to preserve heat and keep warm microclimate in a cold weather. Heat distribution measurements on various body parts revealed that the temperature after PCM treatment was significantly higher. The clothing pressure after 10% pattern reduction showed higher before reduction, at the same time, even lower than the comfort clothing pressure range of $5{\sim}10gf/cm^2$, implying that experimental garment of this research is acceptable in terms of clothing pressure. Evaluation results on the comfort to move in various motions proved that adequate clothing pressure improved the wear comfort in various motions.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• Textile Coloration and Finishing
• /
• v.10 no.3
• /
• pp.10-19
• /
• 1998

This paper investigates the change of mechanical properties and thermal shrinkage in commercial multi-filament PET(polyethylene terephthalate) , namely, regular yarn, POY, DTY and composite yarn. To determine changing the effects of processing steps, these were examined at three steps process simulation conditions. The first step is sizing simulation$(S-1\;step\;:\;130^\circ{C}\times2\;min$., hot air treatment under 0.1 gf/d load), the second step is scouring simulation$(S-2\;step\;:\;100^\circ{C}\times20\;min$., boiling water treatment under free tension)and final step is setting simulation$(S-3\;step\;:\;180^\circ{C}\times2\;min$., hot air treatment under free tension). Regular yarn in multi-step treatment showed higher shrinkage at S-3 step and DTY showed higher in at S-1 step. While POY was relaxed at S-1 step, composite yarn showed different shrinkage properties depending on composite yarn type. Mechanical properties showed good relationship with shrinkage : high shrinkage makes initial modulus decrease and bleating strain increase. It also makes decreasing yield strain and yield stress decrease.

• Journal of Periodontal and Implant Science
• /
• v.36 no.3
• /
• pp.767-782
• /
• 2006

이 연구의 목적은 DNA microarray 분석법을 이용하여 건강한 사람치주인대섬유모세포, 건강한 사람치은섬유모세포, 복제노화된 사람치은섬유모세포, 염증성 사람치주인대 섬유모 세포의 유전자 발현 형태를 상호비교하고자 하였다. 환자의 동의하에 충치, 치주염이 없이 교정발치된 치아의 치주인대세포를 배양하여 건강한 치주인대섬유모세포로, 만성치주염으로 발거된 치아에서 채취하여 배양한 세포를 염증성 치주인대섬유모세포로 선정하였다. 구강에서 채취한 치은결체조직에서 배양한 사람치은섬유모세포를 일차 배양한 후 계대배양을 통해 복제 노화를 유도하였다. $-198^{\circ}C$의 액화질소에 저장되어 있던 2, 4, 8, 15, 16세대 세포를 실험에 이용하였다. 위의 모든 세포들은 60 mm 배양접시에서 세포들이 80-90%의 밀생이 될 때까지 5% $CO_2$, $37^{\circ}C$, 100% 습도의 배양기에서 2일 간격으로 10% FBS가 함유된 DMEM 세포 배양액을 교체하면서 세포를 배양하였다. Trizol Reagent (Invitrogen, USA)를 이용하여 제조회사의 지시에 따라 total RNA를 추출하였다. 18S RNA와 28S RNA를 확인한 후 DNA microarray 분석을 실시하였다. 4배수 이상의 변화양상을 비교시 상호 유전자 발현의 차이를 나타내었다. 건강한 사람치은섬유모세포(2세대)와 노화된 치은섬유모세포에서 가장 높은 발현변화를 나타낸 반면 DMC1 dosage suppressor of mck1 homolog, meiosis-specific homologous recombination,은 건강한 치은섬유모세포에서 가장 높게 나타났다. 염증성 치은인대섬유모세포와 건강한 치주인대 섬유모세포를 비교시, Regucalcin은 염증성 치주인대섬유모세포에서 가장 높게 나타났고, Vascular cell adhesion molecule 1도 두 번째로 높게 나타났다. 건강한 치주인대섬유모 세포와 건강한 치은섬유모세포를 비교시, IL-11과 periostin이 치주인대섬유모세포에서 높은 발현을 나타낸 반면, Prostaglandin D2 synthase 21kDa과 Thioredoxin interacting protein은 치은섬유모세포에서 높은 발현을 나타내었다. 염증성 치주인대섬유모세포와 노화된 치은섬유모세포(15세대 이상)를 비교시 149개의 유전자가 유사한 발현 수준을 나타내었다. 이 연구는 노화, 염증, 세포 형태에 따라서 유전자 수준에서 가장 높거나 높은 수준 변화를 보이는 유전자가 다를 수 있음을 나타낸다. 향후, 치주염 환자들에서, 노염, 염증, 세포 특이성에 관한 유전자 표시지를 이용하여 진단하거나 치료에 응용하기 위해서는 더 많은 연구가 필요하리라 사료된다.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.103-110
• /
• 2000

To examine the physical properties of POY through the microstructure control, the crystal structure such as the crystallinity, the crystallite size, the orientation, the shrinkage, the tensile properties, and the thermal stress of POY(80/48, SD) were examined at different draw ratios and annealing temperatures. From the examination following conclusions were obtained : 1. The crystallinity was more effected by the heat setting temperature than by the draw ratio. The increasing rate was greatest at the heat setting temperature range of $170~190^\circ{C}$. 2. The crystallite size perpendicular to the fiber axis was more effected by the annealing temperature at lower draw ratios. On the other hand, the crystal and amorphous orientations were more effected by the heat setting at higher draw ratios. 3. The boiling shrinkage did not change significantly, but the total shrinkage showed 13% at the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$. 4. The maximum thermal stress increased with increasing the draw ratio and decreasing the heat setting temperature in the temperature range of $170~210^\circ{C}$. At the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$, the maximum thermal stress found was 1.1gf/d. 5. In the heat setting temperature above $170^\circ{C}$ after the drawing, the crystallinity, the crystallite size, the orientation, and the strength increased with increasing temperature, but the shrinkage and the maximum thermal stress decreased with increasing temperature.

• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.39-48
• /
• 2004

This experiment was conducted to investigate the effect of continuous feeding of probiotics on growth performance, nutrient digestibility, blood urea nitrogen(BUN) and immune responses in pigs. Treatments were 1) Control(basal diet), 2) P-O.l(basal diet + 0.1% probiotics) and 3) P-0.2(basal diet + 0.2% probiotics). In growth trial, a total of sixty pigs(6.17 $\pm$ 0.45 kg average body weight) weaned at 21 days of age were used. All pigs were assigned according to sex and body weight, and each treatment had 5 replicates of 4 pigs per pen in a randomized complete block(RCB) design. During 0${\sim}$8 weeks, there was no significant difference in average daily gain(ADG), average daily feed intake(ADFI) and gain:feed ratio(GfF) among treatments. During 9 - 20 weeks, ADG was improved significantly in pigs fed P-O.I or P-0.2 diets when compared to the pig fed control diet(P <0.05), but there was no significant difference in ADFI and GfF ratio. During overall period, ADG, ADFI and GfF ratio were not significantly different among treatments. In the first metabolic trial(17.93 $\pm$1.45kg average body weight), apparent digestibility of OM, protein, fat in pigs fed P-O.l and P-0.2 diets were greater than in pigs fed control diet(P <0.05) and ash digestibility in pigs fed P-0.2 diet was significantly higher than in pigs fed control diet(P <0.05). Calcium digestibility in pigs fed P-0.2 diet was significantly higher than in pigs fed control and P-O.I diets(P <0.05). Fecal-N excretion was lower in pigs fed P-O.! and P-0.2 diets than in pigs fed control(P <0.05). In the second metabolic trial(41.80 $\pm$ 2.68kg average body weight), there was no significant difference among treatments in apparent digestibility of nutrients and N-retention. In blood assay for the BUN and immune responses investigations, there was no significant difference among treatments during overall period of experiment. Therefore, this experiment suggested that probiotics supplementation could improve growth performance and nutrient digestibility of pigs.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.2
• /
• pp.107-115
• /
• 2000

Preservative effects of natural preservatives, citric acid and salt on chopped garlic were investigated. Bacterial multiplying and browning of chopped garlic were very effectively repressed by 0.5-1% citric acid. Salt had an effect on the repression of bacteria multiplying and browning of chopped garlic except for 1% NaCl. Synergistic effect between citric acid and NaCl was also very good for decreasing bacteria multiplying and maintaining Hunter color of chopped garlic. Compounded effect of the GF. citric acid. and ascorbic acid was somewhat proper in the sensory evaluation of chopped garlic. And the sensory evaluation score was the highest in chopping size 3mm(diameter) and viscosity 4500cp. of chopped garlic.

• The Korea Journal of Herbology
• /
• v.36 no.5
• /
• pp.93-99
• /
• 2021

Objective : Caryophylli Flos has been used in Korean medicine to relieve vomiting and pains caused by chills that make fluid circulation difficult. This study was designed to investigate the protective effect of ethanol extract of Caryophylli Flos (CF) in hydrogen peroxide (H₂O₂)-induced apoptotic cell death in human keratinocyte HaCaT cells. Methods : CF was prepared by extracting 200 g of Caryophylli Flos in 2 L of ethanol for 48 h. Cell viability was measured by MTT assay, and the protein expression was monitored by Western blot analysis. Apoptosis was determined by terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) assay. Reactive oxygen species (ROS) was measured using fluorescent dye, and reduced glutathione (GSH) was determined with a colorimetric commercial kit. Results : CF protected HaCaT cells from cell death caused by oxidative stress after H₂O₂ treatment. H₂O₂ amplified generation of ROS and induced depletion of GSH, whereas these changes in ROS and GSH were inhibited by GF treatment. In addition, H₂O₂ resulted in apoptosis as assessed by TUNEL assay and the expression of apoptosis regulator proteins. However, cells treated with CF showed a decrease in TUNEL-positive cells and restored the reduced expression of procaspase-9, -3 and PARP. Conclusion : This study showed cytoprotective effects of CF by anti-apoptotic activity while exerting antioxidative activity in H₂O₂-treated HaCaT cells. These results suggest that CF could be beneficial in skin damage caused by oxidative stress.