• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.839-846
• /
• 2007

The objective of the present study was to investigate the effect of dietary supplementation of the ginseng by-product on growth performance and meat quality in finishing pigs. The animals used in the experiment were a total of 24 Landrace×Yorkshire and weighted 65.81±2.02kg. The experimental diets were basal diet(CON) and 2.5% ginseng by-product(GBP), which replaced lupin in basal diet. The pigs were allotted at 4 pigs per pen with three replicate pens per treatment by completely randomized design. In growth performance, ADFI was significantly lower(P<0.0001) in GBP than in CON. In plasma biochemical composition, total protein(P<0.01), blood urea nitrogen(P<0.03), glucose(P<0.01), albumin(P<0.02), calcium(P<0.01) and inorganic phosphate(P<0.01) were significantly higher in GBP than in CON. Carcass and meat quality were not significantly different between treatments. Total ginsenoside content on meat was significantly higher(P<0.0001) in GBP than in CON. TBARs was significantly lower in GBP than in CON for 6 days(P<0.03) and 12 days (P<0.06), respectively. Our research indicates that plasma biochemical composition, total ginsenoside content and TBARs were affected when replaced with ginseng by-product. Ginseng by-product in the pig diet increased pig muscle ginsenoside, indicating that ginseng by-product can be used as a feed additive.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.510-523
• /
• 2020

This study analyzed groundwater quality in hydroponic cultivation facilities. Through this study, the possibility of groundwater use was evaluated according to the quality of the groundwater for hydroponic cultivation facilities. Good groundwater quality, on average, is pH 6.61, EC 0.27 dS/m, NO3-N 7.64 mg/L, NH4+-N 0.80 mg/L, PO4-P 0.09 mg/L, K+ 6.26 mg/L, Ca2+ 18.57 mg/L, Mg2+ 4.38 mg/L, Na+ 20.85 mg/L, etc. All of these satisfy the water quality standard for raw water in nutrient cultivation. But in the case of farmers experiencing problems with groundwater quality, most of the items exceeded the water quality standard. As a result of the analysis, it was judged that purifying groundwater of unsuitable quality for crop cultivation, and using it as raw water, was effective in terms of water quality and soil purification. If an agricultural water purification system is constructed based on the results of this study, it is judged that the design will be easy because the items to be treated can be estimated. If a purification system is established, it can use groundwater directly in the facility and for horticulture. These study results will be available for use in sustainable agriculture and environments.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.2 s.2
• /
• pp.98-107
• /
• 2000

Increased use of computers in AEC (Architecture, Engineering and Construction) has expanded the amount of information gained from CAD (Computer Aided Design), PMIS (Project Management Information System), Structural Analysis Program, and Scheduling Program as well as making it more complex. And the productivity of AEC industry is largely dependent on well management and efficient reuse of this information. Accordingly, such trend incited much research and development on ITC (Information Technology in Construction) and CIC (Computer Integrated Construction) to be conducted. In exemplifying such effort, many researchers studied and researched on IFC (Industry Foundation Classes) since its development by IAI (International Alliance for Interoperability) for the product based information sharing. However, in spite of some valuable outputs, these researches are yet in the preliminary stage and deal mainly with conceptual ideas and trial implementations. Research on unveiling the process of the IFC application development, the core of the Design Information management system, and its applicable plan still need be done. Thus, the purpose of this paper is to determine the technologies needed for Design Information management system using IFC, and to present the key roles and the process of the IFC application development and its applicable plan. This system play a role to integrate the architectural information and the structural information into the product model and to group many each product items with various levels and aspects. To make the process model, we defined two activities, 'Product Modeling', 'Application Development', at the initial level. Then we decomposed the Application Development activity into five activities, 'IFC Schema Compile', 'Class Compile', 'Make Project Database Schema', 'Development of Product Frameworker', 'Make Project Database'. These activities are carried out by C++ Compiler, CAD, ObjectStore, ST-Developer, and ST-ObjectStore. Finally, we proposed the applicable process with six stages, '3D Modeling', 'Creation of Product Information', 'Creation and Update of Database', 'Reformation of Model's Structure with Multiple Hierarchies', 'Integration of Drawings and Specifications', and 'Creation of Quantity Information'. The IFCs, including the other classes which are going to be updated and developed newly on the construction, civil/structure, and facility management, will be used by the experts through the internet distribution technologies including CORBA and DCOM.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.1
• /
• pp.31-38
• /
• 2000

This study was conducted to evaluate changes in the lysine to digestible energy (DE) ratio on performance, apparent ileal and fecal nutrient digestibilities as well as blood urea nitrogen (BUN), and to estimate optimal lysine:DE ratios for growing pigs of different sexes. A total of 150 pigs ($(Landrace{\times}Yorkshire){\times}Duroc$, 16.78 kg average body weight, 75 barrows and 75 gilts) was randomly allotted into a $2{\times}3$ (sex by diet) factorial design. Three diets were formulated to contain a crude protein level of 19%, a DE level of 3.5 Mcal/kg with three lysine:DE ratios of 3.2 (low), 3.5 (middle) and 3.8 (high) g lysine/Mcal DE per kg diet for both barrows and gilts throughout the study. With increasing dietary lysine:DE ratio, the average daily gain (ADG) of barrows decreased but there was no significant difference among treatments (p>0.05). However, ADG was significantly higher in gilts fed the diet containing the high lysine:DE ratio (p<0.05), followed by the middle and low lysine:DE ratio dietary groups. No significant effects of lysine:DE ratios on feed intake (ADFI) and feed conversion (F/G) were observed for barrows and gilts during overall period (p>0.05), while the optimal F/G was found in barrows fed diets of low and in gilts fed high lysine:DE ratio. Blood urea nitrogen had a positive relationship with growth rate. The results showed that the optimal lysine:DE ratios were 3.2 and 3.8 g lysine/Mcal DE per kg diet for barrows and gilts of 16 to 57 kg body weight, respectively.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.6-6
• /
• 2017

농용트랙터의 전방차축 현가장치는 노면으로부터 발생하는 진동의 영향을 줄일 수 있기 때문에 트랙터의 대형화, 고속화의 추세에 맞춰서 승차감과 조향감을 향상시키는 데 중요한 역할을 한다. 전방차축의 현가장치는 트랙터의 차체 무게에 의한 부하가 크고, 또한 유압 펌프를 비롯한 유압시스템이 존재하기 때문에 유압식 회로로 구성하는 것이 바람직하다. 하지만, 현가장치의 유압회로를 개발하는데 있어서 실제 시스템을 구성하여 실제 실험을 통한 개발에는 비용과 시간이 많이 필요하다. 본 연구에서는 유압식 전방차축 현가장치에 필요한 유압회로부 개발을 위하여 시뮬레이션 기법과 요인시험 장치를 이용 적정 유압회로를 설계하고자 하였다. 이를 위하여 어큐뮬레이터, 가변 오리피스, 릴리프밸브, 체크밸브 등으로 구성된 유압 현가요인 시험 장치를 설계 제작하였으며, 현가 부품인 실린더 행정, 속도, 전달되는 힘을 측정하고, 유압 해석 프로그램인 SimulationX를 이용 구성된 유압회로 부품에 측정값을 입력하여 실제 조건과 유사한 동특성을 나타내는 전방차축 현가요인 시뮬레이션 모델을 개발하였다. 개발된 시뮬레이션 모델을 이용하여 실제 시험조건과 같은 가진 조건을 부여하여 개발 현가장치의 특성 값 변동에 따른 현가 성능을 구명하였다. 이를 위해 시뮬레이션 상에서 120 마력 트랙터 무게의 50% 수준에 해당하는 2,000 kg의 부하가 존재하는 상태에서 현가장치의 유/무에 따른, 감쇠 계수의 변화에 따른 스프링상 질량의 RMS 가속도를 비교하였다. 입력 가진으로는 1 Hz, 4 Hz, 8 Hz의 진동수에 각각 10 mm, 6.4 mm, 3.2 mm의 진폭을 인가하였다. 시뮬레이션 결과, 1 Hz에서는 현가장치가 있는 경우 최대 55.9% 개선되었고, 4 Hz에서는 최대 3.9 % 개선되었고, 8 Hz에서는 최대 61.4%까지 개선되었다. 이는 4 Hz의 경우에는 2,000 kg의 부하에 해당하는 고유 진동수 대역에 해당하기 때문에 그 감쇠 효과가 없는 것으로 나타났다. 하지만, 다른 주파수 대역에서는 현가장치가 효과적으로 작동하는 것을 나타내었다. 설계한 전방차축 현가 유압회로부를 시뮬레이션을 통하여 분석한 결과, RMS 가속도의 개선이 명확하게 이루어지는 것을 확인하였으며 입력 주파수 변화에 따라 감쇠특성도 나타나는 것을 확인하였다. 추후 연구에는 설계한 유압회로부와 관련 부품을 설계 제작하여 실제 트랙터에 장착 그 성능을 검증할 예정이며, 노면조건에 따라 감쇠성능을 유지하기 위한 반능동형 또는 적응형 현가장치 제어 기술을 적용하여 개선된 현가성능을 확보하기 위한 연구를 수행할 예정이다.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.58-73
• /
• 2006

The purpose of this study was to improve of fittness and coverage rate of exporting domestic clothing to China for Chinese Adult Female. For study, It was measured 1381 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1360 female women was seleted for development of apparel sizing system. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, correlation analysis, factor analysis, ANOVA(t-test and F-test), duncan's multiple test. The result was as follows: Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1:constitutional obesty and width size, factor 2: longistudinal body size, factor 3: shoulder form and size, factor 4: longistudinal upper body size, factor 5: under body size, factor 6: shoulder dropping. According to the Women's Wear Specifications(GB/T 1335.2-1997) by drop, body types of Chinese Adult female was classified into six types, it was Y, A, B, C and Z, D. In order, A type as standard somatotype(49.8%), B type(26.9%), Y type (18.8%), C type(2.9%). Y type had the average height and shoulder, bust girth. They were slimmer in overall terms. A type had a normal obesity and body size in height, shoulder, bust girth. They were average Chinese Women. B type had a smaller then A type. They were more obes and thick waist girth. C type had the highest obesity, the widest shoulder and bust girth, and thick waist girth. The characteristics of each body type following the body type structure factor are Y-type for slender type, A-type for standard type, B-type for slightly large type, and C-type for obese type. For each region, the Beijing area had in the order of A-type, Y-type, B-type and C-type, and the Shanghai area had in the order of A-type, B-type, Y-type and C-type.

• Journal of The Korean Association For Science Education
• /
• v.24 no.2
• /
• pp.357-374
• /
• 2004

This paper described the types and characteristics of educational programs in major natural history museums of the world. Data were collected from the websites, annual reports, and written materials of the Natural History Museum at London, Australian Museum at Sydney, Field Museum of Natural History at Chicago, Smithsonian Museum at Washington D.C, Royal Tyrrell Museum at Canada and American Museum of Natural History at New York. As the result of this study, we presented ten types of educational programs, which were moveable museums, workshops, lecture/courses, festival/events, discovery activities, scientific exploration/research projects, field trips, youth curators/internship, loan materials and camp/tours. We also described the examples equivalent to each program type. The characteristics of educational programs provided by museums as informal learning settings were analyzed in terms of their themes, participation levels, connection with exhibition, relation to curriculum, and learning activity levels. Information in this paper will assist science teachers, museum educators and curators: (1) to design and implement various types and contents of educational programs; (2) to use characteristics of educational programs to assess and develop them; (3) to make important contributions to science education that involves the introduction of various scientific aspects and collections to the public, and the use of programs for science learning and teaching coherent to existing curricula.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.3
• /
• pp.180-201
• /
• 2020

It has been widely known that the effect of diffracted waves at the tip of composite breakwater with finite length causes the change of standing wave height along the length of breakwater, the spatial change of wave pressure on caisson, and the occurrence of meandering damage on the different sliding distance in sequence. It is hard to deal with the spatial change of wave force on trunk of breakwater through the two-dimensional experiment and/or numerical analysis. In this study, two and three-dimensional numerical techniques with olaFlow model are used to approach the spatial change of wave force including the impulsive breaking wave pressure applied to trunk of breakwater, the effect of rear region, and the occurrence of diffracted waves at the tip of caisson located on the high crested rubble mound. In addition, it is thoroughly studied the mean wave height, mean horizontal velocity, and mean turbulent kinetic energy through the numerical analysis. In conclusion, it is confirmed that the larger wave pressure occurs at the front wall of caisson around the still water level than the original design conditions when it generates the shock-crushing wave pressure checked by not two-dimensional analysis, but three-dimensional analysis through the change of wave pressure applied to the caisson along the length of breakwater.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.390-395
• /
• 2002

Two experiments were conducted to study the performance and carcass characteristics of Hanwoo (Korean native beef cattle) steers (Experiment 1) and the nutrient digestibility of sheep (Experiment 2) when the animals fed diets containing four levels of dried wormwood (Artemisia sp.). For both experiments the animals were given a basal diet consisting of rice straw and concentrate mixed at 3:7 ratio (on DM basis). In Experiment 1, the treatments were designed as a completely randomized design with two feeding periods. Steers were allotted in one of four dietary treatments, which were designed to progressively substitute dried wormwood for 0, 3, 5 and 10% of the rice straw in the basal diet. Bodyweight gain and average daily gain (ADG) of Hanwoo steers fed diets containing the 5 and 10% wormwood inclusion were greater (p<0.05) than the 3% wormwood-feeding group. Total and daily intakes of roughage and concentrate were not altered by all levels of dried wormwood inclusion. However, the 10% dried wormwood inclusion led to increased total feed intake (p<0.05) compared with that of the 0 and 3% of dried wormwood inclusion. Carcass weight, carcass yield and backfat thickness were not altered by dried wormwood inclusion. The highest level of dried wormwood inclusion resulted in significantly increased (p<0.05) loin-eye area compared with the 0 and 5% levels of dried wormwood inclusion. Experiment 2 was designed by a $4{\times}4$ Latin square with four periods. Sheep were allocated in one of four dietary treatments as same as in Experiment 1. Digestibilities of DM and TDN were significantly increased (p<0.05) in sheep fed the diet containing all three levels of dried wormwood inclusion compared with the control treatment. Digestibilities of CP and crude fiber in the 5% dried wormwood inclusion highly increased (p<0.05) up to 8.2 and 5.5% respectively relative to the control treatment. The palatability was significantly improved (p<0.05) by the 5% dried wormwood inclusion compared with the control treatment. It is concluded that feeding diets containing dried wormwood substituted for equal weights of rice straw at 5 and 10% levels would be anticipated to provide better quality roughage for beef cattle production and higher income for beef cattle producers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1213-1220
• /
• 2010

This experiment evaluated the effects of dietary lysine restriction and energy density on growth performance, nutrient digestibility and meat quality of finishing pigs. A $2{\times}2$ factorial arrangement of treatments was utilized in a randomized complete block (RCB) design, and factor 1 was lysine restriction and factor 2 was energy density. The control diet was formulated to contain 3.265 Mcal of ME/kg, 0.75% lysine in the early-finishing phase and 3.265 Mcal of ME/kg, 0.60% lysine in the late-finishing phase and other nutrients met or exceeded NRC (1998) standards. Compared to the control diet (CON), lysine levels of experimental diets were restricted to 15% (treatment EL, EEL) or 30% (treatment ELL, EELL), whereas energy level of experimental diets was increased by 0.100 or 0.200 Mcal of ME/kg. A total of 100 crossbred pigs ([Yorkshire${\times}$Landrace]${\times}$Duroc), with average initial body weight of $58.47{\pm}1.42\;kg$, were allotted to 5 dietary treatments based on sex and body weight. Each treatment had 5 replicates with 4 pigs (two barrows and two gilts) per pen. ADG, ADFI and feed efficiency were calculated in an 8-week growth trial. In the late finishing period (5-8 weeks), pigs fed ELL or EELL diets had decreased ADG and feed efficiency (p<0.01), however, when the EEL diet was provided, a similar growth performance was observed compared to those fed the CON diet during the whole experimental period (p>0.05). In a metabolic trial, 15 pigs were used to evaluate the effect of dietary lysine restriction and energy density on nutrient digestibility. The digestibility of dry matter, crude fat and crude ash was not improved by restricting dietary lysine or energy density. However, crude protein digestibility was decreased (p<0.05) as dietary lysine was restricted. When dietary lysine was restricted, fecal nitrogen was increased whereas nitrogen retention was decreased. BUN concentration was affected by dietary lysine restriction; treatments ELL and EELL had higher BUN values than other treatments (p<0.01). Carcass characteristics and meat quality were measured when average body weight of pigs reached $107.83{\pm}1.50\;kg$. Treatment ELL had higher last rib backfat depth (p<0.05) than treatment CON, but ELL and EEL did not differ significantly. The ELL and EEL treatments had higher (p<0.05) subjective marbling score than treatment CON. Treatment EEL showed higher longissimus fat content than treatment EL and CON (p<0.01). The results indicated that finishing pigs fed a diet with 15% lysine restriction and 3.465 Mcal of ME/kg energy density had no detrimental effects on growth performance and N utilization, and could achieve substantial increases in marbling and longissimus fat content of pork.