• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.86-90
• /
• 2016

A 3D ultrasonic anemometer measures the direction and velocity of wind in a 3D space. The 2D ultrasonic anemometers developed by different manufacturers do not differ significantly in terms of their form or structure. The 3D ultrasonic anemometers, on the other hand, have more diverse forms than their 2D counterparts depending on the measurement algorithms and methods. Designing and reviewing the structure at the initial stage and defining its performance objectives are time-consuming processes. The process can be made cost-effective and time-saving if the validity is tested by model design and structural interpretation, and the structure is designed to withstand high wind velocities. This study presents the results of a 3D ultrasonic anemometer on real sample data by using a 3D modeling program, CATIA, for ultrasonic anemometer modeling.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.527-536
• /
• 2007

This paper proposes a 3D fashion design system that generates a 3D clothes model by using 2D patterns of clothes and drapes the 3D clothes model on a 3D human model. In the proposed system, 2D patterns of clothes are designed by selecting comer points of 2D mesh. After designing 2D patterns, a 3D clothes model is designed by describing the control points to be connected between 2D patterns. The proposed system reads a 3D human body model file and the designed 3D clothes model and creates a 3D human model putting on the clothes by using the mass-spring model based physical simulation. It calculates collision and reaction between the triangles of human body model and those of clothes for realistic simulation. Because the number of triangles is very large, the collision and reaction processing need a lot of time. To solve this problem, the proposed system decreases the number of collision and reaction processing by using the Octree space subdivision technique. It took a few seconds for generating a 3D human model putting on the designed 3D clothes.

• KIEAE Journal
• /
• v.2 no.3
• /
• pp.3-10
• /
• 2002

The objectives of this research are to find the problems in the courtyards of the elementary schools and to provide the new design guidelines on the environmental design applicable to the court yard of the elementary schools. To analyze the current usage condition of the court yards of the elementary schools, sixty-three elementary schools in Seoul were investigated through the architectural drawings, and then nineteen of them were selected for the detailed investigations. The survey findings testified that the orientation of the courtyard's open direction and D/H ratio would be critically important for the architectural design of the courtyard in elementary schools. From these analyses, the following guidelines would be proposed on the courtyards for the improved elementary school design. Firstly, to increase the environmental condition of the courtyard, the orientation of the courtyard's open side would not be north. Secondly, to make the environmentally friendly courtyard, it is necessary to increase the D/H ratio. Sooner or later, the courtyard of the elementary schools would be introduced very largely. Thus, it is important to figure out the elements of the environmental design of the courtyard in elementary schools. The continuous research on the elements of the environmentally friendly design of the courtyard will provide the proper direction for the better design of the elementary schools.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.8
• /
• pp.54-65
• /
• 1992

A huge amount of multiplications is required for 2-D filtering on the image data, making it difficult to implement a real-time quincuncial interpolator. In this paper, efficient design technique and VLSI structures for 2-D multipleierless filter are presented. In the filter design, by introducing an efficient scheme for discretizing the frequency response of the prototype filter, it is shown that a significant amount of the computational burden required in the conventional techniques, such as local search, branch and bound techniques, could be saved. In the case of 5$\times$5 filter, it is found that the design technique described in this paper could save about 80% of the computation time, compared to the conventional methods, while providing a comparable performance. For a hardware implementation, two different VLSI structures for 2-D multiplierless filter are also introduced in the paper : One is for block parallel processing and the other for scan-line parallel processing. In both structure, the AP(area-period) figure improves over Wu's structure[4].

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.7
• /
• pp.597-604
• /
• 2014

High efficiency production requires the improved performance of CAD/CAM system. Although the CAD and CAM have been significantly developed over the last three decades, they must still study on the reuse of information during process. In this study, we developed a new integrated CAD/CAM system which can reuse the information generated in previous processes, in order to improve its performance. In addition, the developed system was verified by comparing with working-time, and system reproducibility was also examined with tolerance in the unmanned operation. Experimental results showed 58% reduction in working-time of 2D Auto-CAM module, 80% in case of 3D Auto-Exchange module, and 54.5% in case of Auto-Design module.

• IE interfaces
• /
• v.25 no.2
• /
• pp.216-228
• /
• 2012

BIM-based 4D simulation makes people easily understand complex construction process using 3D graphics model and helps them review and identify the construction schedule in each phase of the construction process. Moreover, 4D simulation can be used as reference data to determine the validity of the process in the design phase and will be utilized as a measure for checking the construction process. Therefore 4D simulation of construction improves efficiency of project management. However, current commercial applications available for 4D simulation do not provide sufficient functions for connection of 3D models and process information. In this paper, we propose an automated generation method through the definition of the process based on a work method template and developed the template based schedule generation system (TSGS).

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.2
• /
• pp.85-91
• /
• 2005

To understand the basic relationship between 3D curved surface model and 2D pattern, simplified torso model was generated by commercial CAD program (IDEAS). 3D torso model was then divided into different blocks and unfolded into a flat pattern as in ordinary works of clothing item design. As results, 2D pattern development of different part of 3D torso model was attempted and analyzed mathematically. It was found that different height, radius and tangent slope of 3D blocks resulted in different 2D pattern. The relationships between the shape parameters of 3D torso blocks and those of 2D patterns were analyzed using regression equations. Direct way of drawing a 2D pattern of corresponding 3D torso block was also illustrated for the convenience of pattern making using conventional measurements of upper/ lower radii and height of 3D torso block.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.05a
• /
• pp.72-73
• /
• 2001

• Journal of Fashion Business
• /
• v.25 no.3
• /
• pp.71-89
• /
• 2021

The purpose of this study was to design posture braces for rounded shoulders by examining characteristics of incorrect postures of rounded shoulders. The review of information in literature on rounded shoulder postures, correction exercise methods, and posture correction devices, has prompted this study to determine the design and material of a proper posture brace for rounded shoulders. In order to develop the pattern of a posture brace for rounded shoulders for women, the study carried out a comfort evaluation of the braces based on the 2D patterns through drafting method by utilizing the body measurements and relational formulae associated with the major body measurement such as bust circumference and on the 3D patterns of the brace which were obtained from 3D human model of women in their early 20s in Korea. Differences in angles were noted when 2D and 3D patterns of shoulder posture braces were compared. The side neck point was relocated farther outside in the 3D pattern to allow additional flexibility in the back-neck area, and the shoulder band was lowered by 14.8°, increasing armhole area comfort. The upper hemline of the front panel was found to rotate upward at an angle of 22.0° as the underarm point of the 3D pattern moved upwards than the underarm point of the 2D pattern, which enhanced comfort in the abdomen area. The 3D designs of shoulder posture brace was preferred in this study, as they significantly improved comfort while conducting fit evaluation compared to the 2D patterns of shoulder posture brace.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.256-264
• /
• 2006

Currently, it is necessary to share and exchange drawing information between 2D and 3D data in AEC(Architecture, Engineering & Construction) fields. The authors suggest an information model framework to express IFC(Industry Foundation Classes)-based drawing of 3D AEC products as 2D drawing. In this study, 1) an information framework has been developed to enable sharing and exchange of AEC product model by adding various information factors, 2) standardized APIs and an IFC2DBrowser are developed.