• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.76-86
• /
• 2011

Objective: To investigate whether the accuracy of 3D laser scanning is influenced by the angles and number of scans. Methods: Using a 3D laser scanner, 10 manikins with facial markers were scanned at 7 horizontal angles (front view and at $20^{\circ}$, $45^{\circ}$, and $60^{\circ}$ angles on the right and left sides). Three-dimensional facial images were reconstructed by 6 methods differing in the number and angles of scans, and measurements of these images were compared to the physical measurements from the manikins. Results: The laser scan images were magnified by 0.14 - 0.26%. For images reconstructed by merging 2 scans, excluding the front view; and by merging 3 scans, including the front view and scans obtained at $20^{\circ}$ on both sides; several measurements were significantly different than the physical measurements. However, for images reconstructed by merging 3 scans, including the front view; and 5 scans, including the front view and scans obtained at $20^{\circ}$ and $60^{\circ}$ on both sides; only 1 measurement was significantly different. Conclusions: These results suggest that the number and angle of scans influence the accuracy of 3D laser scanning. A minimum of 3 scans, including the front view and scans obtained at more than $45^{\circ}$ on both sides, should be integrated to obtain accurate 3D facial images.

• The KIPS Transactions:PartB
• /
• v.18B no.1
• /
• pp.21-28
• /
• 2011

A 3D face shape derived from 2D images may be useful in many applications, such as face recognition, face synthesis and human computer interaction. To do this, we develop a fast 3D Active Appearance Model (3D-AAM) method using depth estimation. The training images include specific 3D face poses which are extremely different from one another. The landmark's depth information of landmarks is estimated from the training image sequence by using the approximated Jacobian matrix. It is added at the test phase to deal with the 3D pose variations of the input face. Our experimental results show that the proposed method can efficiently fit the face shape, including the variations of facial expressions and 3D pose variations, better than the typical AAM, and can estimate accurate 3D face shape from images.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.4
• /
• pp.288-293
• /
• 2004

Purpose: increased uptake of wrist and hand joints in three phase bone scintigraphy (TPBS) have been used in the detection of reflex sympathetic dystrophy syndrome (RSDS). TPBS frequently shows increased shoulder uptake in the hemiplegic RSDS patients. We investigated the significance of the shoulder uptake in the detection of these patients. Materials and Methods: Twenty three patients who had hemiplegia due to brain stroke and diagnosed as RSD were enrolled in this study (M:F=16:7, R:L=11:12). The mean age was $63{\pm}10$ yrs. Ter normal volunteer (mean age: $60{\pm}5$, M:F=1:9) data was used as control group. TPBS was performed $59{\pm}32$ days after stoke (acute stage). We obtained the count ratios of bilateral hands by drawing a region of interest (ROI) in three phase images and compared to the count ratios of shoulders in the delayed image. Hand ROI included an ipsilateral wrist. Sensitivity of detecting the affected limb was defined using the right/left count ratio of normal control. Results: Sensitivities using count ratios of hand blood flow, blood pool and delayed image were 45%, 76% and 78%, respectively. Sensitivity of shoulder count ratio was 74%. Log of right/left counts of hand delayed image and that of shoulder delayed image were correlated well with statistical significance (Spearman's R=0.824, p<0.001). Conclusion: Shoulder uptake showed good correlation with hand uptake in the delayed image of TPBS. Shoulder uptake maybe helpful in the diagnosis of reflex sympathetic dystrophy syndrome in patients with hemiplegia.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.135-138
• /
• 2001

본 논문에서는 3D 레이저 스캐너로 입력된 3차원 얼굴 영상에서 코의 특징 정보를 이용하여 얼굴을 인식하는 알고리즘을 제안하였다. 특히 3차원 영상은 주변의 조명 변화에 크게 영향을 받지 않는 장점이 있다. 이러한 정보를 이용하여, 제안된 알고리즘에서는 얼굴에서 가장 두드러지게 보이는 코의 3차원 정보를 이용하여 인식하는 알고리즘을 제안한다. 먼저 코를 추출한 다음, 회전된 3차원 영상에 대하여 정규화를 실시하고, 등고선을 이용한 영역기반의 방법과 특징기반의 방법을 이온하여 인식을 수행한다. 등고선을 이용한 영역기반은 3차원 얼굴 영상을 코끝의 좌표를 기준 점으로 등고선의 값이 10, 20, 30이 되는 영역을 추출 한 후 데이터 베이스 값들과 비교하여 각각의 차 영역에 대한 무게중심(X, Y), 픽셀 수, 분산을 구하여 순위가 가장 높은 것을 취한다. 특징 기반의 방법으로, 얼굴에 있어서의 실제의 코의 길이, 높이, 너비를 구하여 그 차가 가장 적은 것을 취한다. 위의 2가지 방법을 이용하여 인식을 수행 결과 100%의 인식률을 나타내었다.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.1-7
• /
• 2007

본 논문은 3차원 스캐너로 획득된 실제 얼굴 데이터를 햅틱 상호작용을 통해 직접 변형하고 재질감을 모델링 하는 알고리즘을 제안한다. 제안된 알고리즘은 그래픽 하드웨어 기반의 햅틱 렌더링 알고리즘을 기반으로 획득된 2.5D 얼굴 데이터를 mass-spring 모델을 적용하여 변형하고 얼굴의 재질감(탄성, 마찰, 거칠기) 정보를 모델링 하는 것이다. 햅틱 장치를 이용한 변형알고리즘은 변형 시 효율적인 변형 영역 탐색을 위하여 공간 분할방법인 k-d 트리 구조를 이용하여 최근방 탐색 알고리즘을 구현하였으며, 사실적인 힘 계산을 위하여 각 포인트 마다 mass-spring 모델을 적용하여 반력 연산 및 물체의 변형을 수행하였다. 아울러 재질감을 모델링 하기 위해 깊이 이미지 기반 표현(Depth Image Based Representation, DIBR)을 이용하여 가상 물체의 거칠기, 탄성, 및 마찰을 편집할 수 있는 방법론을 제시하고, 편집된 재질감을 직접 물체의 표면에 적용하여 렌더링 하는 알고리즘을 제안한다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2016-2017
• /
• 2007

본 논문은 와전류 탐상 시 출력되는 결과를 하나의 디스플레이로 결과를 비교하기 위하여 2D 및 3D의 그래프를 Labview를 통하여 구현하였다. 와전류센서에서 들어오는 아날로그 신호를 효과적으로 제어하여 그 데이터를 수집하고 수집된 데이터를 필요로 하는 결과 값으로 분리하여 분석이 용이하도록 프로그램을 구현하였다. 또한 와전류탐상에 쓰이는 스캐너를 제어함으로써 결함 검출 과정을 보다 쉽게 할 수 있었다. 그 결과로 결함의 위치 및 형태, 종류 등을 판단하는데 도움이 되도록 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2681-2690
• /
• 2010

This paper proposes 3D facial modeling system without using 3D scanner and camera or expensive software. This system enables efficient 3D facial modeling to cost reduction and effort saving for natural facial modeling. It detects edges of component of face using edge detection based on fuzzy logic from any 2D image of front face. It was mapped fitting position with 3D standard face model by detected edge more correctly. Also this system generates 3D face model more easily through floating and flexible control and texture mapping after fitting that connection of control point on detected edge from 2D image and mesh of 3D standard face model.

• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.15-26
• /
• 2022

With the recent increase in old and dangerous buildings, the demand for technology in the field of structure demolition is rapidly increasing. In particular, in the case of structures with severe deformation of damage, there is a risk of deterioration in stability and disaster due to changes in the load distribution characteristics in the structure, so rapid structure demolition technology that can be efficiently dismantled in a short period of time is drawing attention. However, structural deformation such as unauthorized extension or illegal remodeling occurs frequently in many old structures, which is not reflected in structural information such as building drawings, and acts as an obstacle in the demolition design process. In this study, as an effective way to overcome the discrepancy between the structural information of old structures and the actual structure, access to actual structures through 3D modeling was considered. 3D point cloud data inside and outside the building were obtained through LiDAR and drone photography for buildings scheduled to be blasting demolition, and precision matching between the two spatial data groups was performed using an open-source based spatial information construction system. The 3D structure model was completed by importing point cloud data matched with 3D modeling software to create structural drawings for each layer and forming each member along the structure slab, pillar, beam, and ceiling boundary. In addition, the modeling technique proposed in this study was verified by comparing it with the actual measurement value for selected structure member.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.85-101
• /
• 2019

Recently, thank to the popularization of light-weight drone through the significant developments in computer technologies as well as the advanced automated procedures in photogrammetry, Unmanned Aircraft Systems have led to a growing interest in industry as a whole. Documentation, maintenance, and restoration projects of large scaled cultural property would required accurate 3D phenomenon modeling and efficient visual inspection methods. The object of this study verify on the accuracies achieved of 3D phenomenon reconstruction as well as on the validity of the preservation, maintenance and restoration of large scaled cultural property by UAS photogrammetry. The test object is cltural heritage(treasure 1324) that is the rock-carved standing Bodhisattva in Soraesan Mountain, Siheung, documented in Goryeo Period(918-1392). This standing Bodhisattva has of particular interests since it's size is largest stone Buddha carved in a rock wall and is wearing a lotus shaped crown that is decorated with arabesque patterns. The positioning accuracy of UAS photogrammetry were compared with non-target total station survey results on the check points after creating 3D phenomenal models in real world coordinates system from photos, and also the quantified informations documented by Culture Heritage Administration were compared with UAS on the bodhisattva image of thin lines. Especially, tests the validity of UAS photogrammetry as a alternative method of visual inspection methods. In particular, we examined the effectiveness of the two techniques as well as the relative fluctuation of rock surface for about 2 years through superposition analysis of 3D points cloud models produced by both UAS image analysis and ground laser scanning techniques. Comparison studies and experimental results prove the accuracy and efficient of UAS photogrammetry in 3D phenomenon modeling, maintenance and restoration for various large-sized Cultural Heritage.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.2
• /
• pp.76-95
• /
• 2011

After dismantled, Mireuksajiseoktap(Stone pagoda of Mireuksa Templesite) is being in the stage of restoration design. Now, different ways - producing restoration model, a 3 dimension simulation - have been requested to make more detailed and clearer restoration design prior to confirmation of its restoration design and actual restoration carry-out. This thesis proposes the way to build the detailed model for better restoration plan using extensively-used Reverse Engineering technique and Rapid Prototyping. It also introduces each stage such as a 3-dimension actual measurement, building database, a 3-dimension simulation etc., to build a desirable model. On the top of that, this thesis reveals that after dismantled, MIruksaji stone pagoda's interior and exterior were not constructed into pieces but wholeness, so that its looks can be grasped in more virtually and clearly. Secondly, this thesis makes a 3-dimension study on the 2-dimension design possible by acquiring basic materials about a 3-dimension design. Thirdly, the individual feature of each member like the change of member location can be comprehended, considering comparing analysis and joint condition of member. Lastly, in the structural perspective this thesis can be used as reference materials for structure reinforcement design by grasping destructed aspects of stone pagoda and weak points of the structure. In dismantlement-repair and restoration work of cultural properties that require delicate attention and exactness, there may be evitable errors on time and space in building reinforcement and restoration design based on a 2-dimension plan. Especially, the more complicate and bigger the subject is, the more difficult an analysis about the status quo and its delicate design are. A series of pre-review, based on the 3-dimension data according to actual measurement, can be one of the effective way to minimize the possibility that errors about time - space happen by building more delicate plan and resolving difficulties.