• ETRI Journal
• /
• v.28 no.1
• /
• pp.84-86
• /
• 2006

This letter presents a small-sized, high-power single-pole double-throw (SPDT) switch with defected ground structure (DGS) for wireless broadband Internet application. To reduce the circuit size by using a slow-wave characteristic, the DGS is used for the quarter-wave (${\lambda}$/4) transmission line of the switch. To secure a high degree of isolation, the switch with DGS is composed of shunt-connected PIN diodes. It shows an insertion loss of 0.8 dB, an isolation of 50 dB or more, and power capability of at least 50 W at 2.3 GHz. The switch shows very similar performance to the conventional shunt-type switch, but the circuit size is reduced by about 50% simply with the use of DGS patterns.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.116-120
• /
• 2013

This paper proposes a novel RF MEMS dc-contact switch with stiff membrane on a quartz substrate. The uniqueness of this work lies in the utilization of a seesaw mechanism to restore the movable part to its rest position. The switching action is done by using separate pull-down and pull-up electrodes, and hence operation of the switch does not rely on the elastic recovery force of the membrane. One of the main problems faced by electrostatically actuated MEMS switches is the high operational voltages, which results from bending of the membrane, due to internal stress gradient. This is resolved by using a stiff and thick membrane. This membrane consists of flexible meanders, for easy movement between the two states. The device operates with an actuation voltage of 6.43 V, an insertion loss of -0.047 dB and isolation of -51.82 dB at 2 GHz.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.411-414
• /
• 2014

A switch is one of the most useful circuits for controlling the path of signal transmission. It can be added to digital circuits to create a kind of gate-level device and it can also save information into memory. In RF subsystems, a switch is used in a different way than its general role in digital circuits. The most important characteristic to consider when designing an RF switch is keeping the isolation as high as possible while also keeping insertion loss as low as possible. For high isolation, we propose leakage signal cancellation and inductive switching for designing a singlepole double-throw (SPDT) RF switch. By using the proposed method, an isolation level of more than 23 dB can be achieved. Furthermore, the heterojunction bipolar transistor (HBT) process is used in the RF switch design to keep the insertion loss low. It is demonstrated that the proposed RF switch has an insertion loss of less than 2 dB. The RF switch operates from 1 to 8 GHz based on the $0.18-{\mu}m$ SiGe HBT process, taking up an area of $0.3mm^2$.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.207-214
• /
• 2005

This paper presents a channel structure for promising high performance pseudomorphic high electron mobility transistor(pHEMT) switching device for design and fabricating of microwave control circuits, such as switches, phase shifters, attenuators, limiters, for application in personal mobile communication systems. Using the designed epitaxial channel layer structure and ETRI's $0.5\mu$m pHEMT switch process, single pole double throw (SPDT) Tx/Rx monolithic microwave integrated circuit (MMIC) switch was fabricated for 2.4 GHz and 5 GHz band wireless local area network (WLAN) systems. The SPDT switch exhibits a low insertion loss of 0.849 dB, high isolation of 32.638 dB, return loss of 11.006 dB, power transfer capability of 25dBm, and 3rd order intercept point of 42dBm at frequency of 5.8GHz and control voltage of 0/-3V These performances are enough for an application to 5 GHz band WLAN systems.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.321-328
• /
• 2008

In this paper, variable gain amplifier(VGA) with a gain slope controller has been proposed and verified by circuit simulations and measurements. The proposed VGA has a gain control, gain slope switch and variable gain range. The input source coupled pair with diode connected load is used for VGA gain stage. The gain slope controller with switch can control VGA gain slope. The proposed VGA is fabricated in $0.18{\mu}m$ CMOS process for multi -standard wireless receiver. The proposed two stage VGA consumes min. 2.0 mW to max. 2.6 mW in gain control range and gives input IP3 of -3.77 dBm and NF of 28.7 dB at 1.8 V power supply under -25 dBm, 1 MHz input. The proposed VGA has 37 dB(-16 dB $\sim$ 21 dB) variable gain range, and 8 dB gain range control per 0.3 V control voltage, and can provide variable gain, positive and negative gain slope control, and gain range control. This VGA characteristics provide design flexibility in multi-standard wireless receiver.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.347-348
• /
• 2014

본 논문에서는 3D TV를 위한 다채널 전류평형 단일스위치 LED 구동회로를 제안한다. 제안된 구동회로는 각각의 LED 채널의 정전류 제어를 위해 별도의 전력단을 사용하는 대신에 2차 측에 단 1개의 switch를 추가하여 하나의 채널 전류를 정전류 제어하고 나머지 다른 채널의 전류를 캐패시터의 성질을 이용한 회로를 사용함으로써 모든 채널 전류의 정전류 제어 및 전류평형이 가능한 회로이다. 추가된 switch는 ZCS(Zero Current Switching) 동작하므로 스위칭 손실을 최소화하여 고효율화 시킬 수 있다. 또한, 여러 LED 채널의 정전류 제어를 별도의 LED Driver단을 사용하지 않고 캐패시터의 성질을 이용하여 구현하기 때문에 소형화 및 저가격화가 가능하다. 최종적으로 제안된 회로의 우수성과 이론적 분석의 타당성 검증을 위해 46" LED 3D-TV 구동회로를 위한 시작품을 제작하여 고찰된 실험 결과를 제시한다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.489-490
• /
• 2006

This paper presents a switch type 2.4/5.8 GHz dual band low-noise amplifier, designed with $0.13{\mu}m$ RF CMOS technology. Using MOS switch allows the LNA to have two different input transconductance and output capacitance modes. Given supply voltage of 1.2 V, the simulation exhibits gains of 8.1 dB and 17.1 dB, noise figures of 3.1 dB and 2.57 dB and power consumptions of 13.0 mW and 10.2 mW at 2.4 GHz and 5.8 GHz, respectively.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.436-438
• /
• 1989

Low inductance 4-channel spark gap switch was designed and performed. At NTP, self-breakdown voltage is 29kv, 43kv and 33kv when ratio of seperation($d_1$: $d_2$) is 1:1, 1:2 and 1:3 respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.3
• /
• pp.132-138
• /
• 2005

In this paper a DPDT(Double-Pole Double Through) switch with defected ground structure(DGS) is proposed. The equivalent circuit for the proposed switch structure is derived according to based on equivalent circuit of proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method. The on/off operation of the proposed switch is obtained by varying the capacitance of the varactor diode at the defected ground plane. In the case of ON state, the insertion loss of the fabricated DPDT was shown under 1dB. And in OFF state, we found the rejection characteristic over 20dB at the designed frequency 2.45GHz. The experimental results show excellent insertion loss at on state and isolation at off state.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.25-29
• /
• 2017

This paper presents a hetero-integration of electrostatically actuated RF MEMS Switch and step up DC-DC converter on a redistribution layer using commercial PCB process. RF characteristics of Duroid with $56{\Omega}$ impedance GCPW transmission line and that of FR4 with $59{\Omega}$ impedance CPW transmission line were analyzed. From DC to 6GHz, RF characteristics of Duroid were better than that of FR4, insertion loss was 2.08dB lower, return loss was 3.91dB higher, and isolation was 3.33dB higher.