• 해양환경안전학회지
• /
• 제24권3호
• /
• pp.295-301
• /
• 2018

This study compares optimization algorithms for efficient estimations of ship's hydrodynamic coefficients. Two constrained algorithms, the interior point and the sequential quadratic programming, are compared for the estimation. Mathematical optimization is designed to get optimal hydrodynamic coefficients for modelling a ship, and benchmark data are collected from sea trials of a training ship. A calibration for environmental influence and a sensitivity analysis for efficiency are carried out prior to implementing the optimization. The optimization is composed of three steps considering correlation between coefficients and manoeuvre characteristics. Manoeuvre characteristics of simulation results for both sets of optimized coefficients are close to each other, and they are also fit to the benchmark data. However, this similarity interferes with the comparison, and it is supposed that optimization conditions, such as designed variables and constraints, are not sufficient to compare them strictly. An enhanced optimization with additional sea trial measurement data should be carried out in future studies.

• 대한기계학회논문집B
• /
• 제24권10호
• /
• pp.1351-1358
• /
• 2000

Two dimensional aerosol dynamics considering the effects of particle generation, coagulation, thermophoresis, sintering and convection has been studied to obtain the growth of non-spherical silica particles in conjunction with determining flame temperature by performing combustion analysis of premixed flat flame. Heat and mass transfer analysis includes 16 species, 29 chemical reaction steps together with oxidation and hydrolysis of SiCl4. The effect of radiation heat loss has also been included. The predictions of flame temperatures and the evolution of particle size distributions were in a reasonable agreement with the existing experimental data.

• 한국유기농업학회지
• /
• 제24권1호
• /
• pp.1-15
• /
• 2016

This paper aims to analyze inequality of maize self-sufficiency rate among countries in 1970-2011. Utilizing sub-group consistency of Generalized Entropy and Atkinson inequality index, the estimated maize self-sufficiency rate inequality is further decomposed into two steps' separate country groups. First, lower and upper income groups and then lower, lower middle, upper middle and high income groups are used based on the national classification of the world bank. It is inferred that 1980s' policy intervention and 1990s' Uruguay Round negotiations have different effect on the inequality among four different country groups.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.279-284
• /
• 2016

Finite element analysis along with DOE scheme has been performed to obtain robust design of crankshaft assembly. This study focused on obtaining optimized fillet radius of crankshaft mainly by statistical approach. 27 design cases using 3 factors with 3 levels are constructed by design of experiment. Changes of design factors and noise factor may influence the durability of crankshaft system. General two stages of robust design may enhance the durability of crankshaft model. Increasing crank arm thickness was adopted as a shrink step and change of fillet radius was used as a shift step. By combining these two steps, the stress concentration at the fillet area is reduced and adequate fillet radius is determined for the robust design of crankshaft.

• 한국환경과학회지
• /
• 제24권7호
• /
• pp.955-960
• /
• 2015

A colorimetric chemosensors $Sn^{2+}$ have been designed and synthesized by three steps. The spirolactam ring-opening process of rhodamine B is one of the most useful mechanisms for controlling fluorescence properties. Herein, new fluorescent chemosensors 1 and 2 based on rhodamine B containing phenothiazine derivertive were synthesized. They exhibit selective fluorescence enhancement behaviour in the presence of $Sn^{2+}$ ion. Complexation between these compounds and the metal cations were confirmed through continuous variation method. It is observed that compounds 1, 2, and $Sn^{2+}$ ion are complexed by 1:1 formation. Especially the proposed compounds 1 and 2 exhibit quick, simple and facile synthetic route.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1978-1990
• /
• 2000

In this study, the free vibrations of the cantilever plate, which is one of the most frequently used elements in various machine structures, are analyzed and further the results are utilized to develop the methodology to predict and control the natural frequencies for designing stabilized systems. The proposed method has three major steps. The first step is the frequency response test to investigate the natural frequencies of some plates, then the database is constituted from experiments and the FEM, and finally the natural frequencies are predicted using the database to be cross-checked by the identification test. The result of this study will help design many different stable structures without any complicated calculations.

• 천문학논총
• /
• 제24권1호
• /
• pp.83-91
• /
• 2009

We have designed data processing server system to include data archiving, photometric processing and light curve analysis for KMTNet (Korea Microlensing Telescope Network). Outputs of each process are reported to the main photometric database, which manages the whole processing steps and archives the photometric results. The database is developed using ORACLE 11g Release 2 engine. It allows to select objects applying any set of criteria such as RA/DEC coordinate and Star ID, etc. We tested the performance of the database using the OGLE photometric data. The searching time for querying 70,000,000 records was under 1 second. The database is fully accessed using query forms via web page.

• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.115-122
• /
• 2011

The critical role played by manufacturing performance measurement systems in achieving competitive success is increasingly recognized. Developing an integrated performance measurement model is significant for strategic management. This study consist of several principal steps. Performance criteria from the literature and an questionnaire were utilized prior to building the performance model. The AHP(Analytic Hierarchy Process) is utilized to evaluate the weight of each criterion when generating the performance measurement model for Korea automobile parts manufacturing company. AHP analysis showed clear difference in the priority between 5 criteria and 24 sub-criteria in terms of manufacturing performance of Korean automobile parts manufacturing company. The result of priority evaluation in the 5 criteria of 2nd level was ranked quality, cost, delivery, employee, flexibility. And the critical sub-criteria in the 24 sub-criteria of 3rd level was ranked claim rate, process defect rate, outsourcing parts defect rate, ability to quality management innovation, claim cost, etc.

• 센서학회지
• /
• 제24권2호
• /
• pp.88-92
• /
• 2015

In order to study the semi-conductive characteristics of carbon black-filled ethylene-propylene-diene monomer (EPDM) composite film, which is used for measuring occlusal force, composite samples with volume ratios of carbon black to EPDM ranging from 30% to 70% were prepared. The process of making a composite film consists of two steps, which involve the preparation of a slurry composition and the fabrication of a thin film using solution casting and a lamination process. To prepare the slurry composition, we dispersed carbon black nanoparticles into an organic solvent before mixing with an EPDM solution in toluene. The mechanical and electrical properties of the resulting carbon black-filled EPDM film were then investigated, and the results showed that the electrical resistance of a film decreases with the increase in the carbon black content. Furthermore, improved elastic recovery was observed after cross-linking the EPDM.

• 소성∙가공
• /
• 제24권3호
• /
• pp.161-166
• /
• 2015

The finite element method has been widely used in the analysis of ring rolling. For ring rolling it requires a high computational expense due to the non-steady state material flow characteristics of the process. The high computational expense causes the finite element analysis to be impractical for industrial applications. In the current study, we aim to develop a practical implicit finite element modeling method for ring rolling. This method uses a step-wise steady state assumption and is called the “Stepped method”. The stepped method divides the whole process time of unsteady-state flow model into a finite number of steady-state models. It then solves the process at several specific time steps until convergence is reached. In order to confirm the performance and validity of the newly proposed stepped method, the result from the stepped method were compared to the results from a Lagrangian finite element method and to results from experiments reported in the literature.