• 산업공학
• /
• 제25권4호
• /
• pp.472-479
• /
• 2012

Before an aircraft is delivered to customers, manufacturers have to verify required reliability for the aircraft. In usual, reliability of electronic equipments in military aircraft are predicted based on MIL-HDBK-217. But the specification has not been revised since 1995. Some alternatives including SR-332 and 217PLUS are suggested in this study. The processes and methods specified in MIL-HDBK-217 are compared with those of SR-332. Additionally, the predicted reliability of aircraft electronic equipment between usage data and field data are investigated using MIL-HDBK-217. The results show that predicted reliability of MIL-HDBK-217 is more conservative (underestimated) than that of usage data and field data.

• Journal of Information Technology Applications and Management
• /
• 제19권2호
• /
• pp.217-231
• /
• 2012

In the past, companies should make enormous facility investment and acquire a right to do business in order to join communication markets, but now they can do business without important facilities, such as communication networks. Such a movement to ease regulations about companies which want to newly join the communication industry is expected not only to change a competition frame of the mobile communication market but also to greatly affect the entire communication industry. Through this study aiming to look into a way to calculate a reasonable wholesale price related to the government's introduction of the Mobile Virtual Network Operator (MVNO) system, I came up with a following result. I applied the operating profit percentage and the ratio of operating gain to cost to the cost plus model and retail minus model, respectively, to calculate the wholesale price and found that when I calculated with the cost plus model applying the operating profit percentage, I could get the highest wholesale price. On the other hand, I got the lowest wholesale price with the retail minus model by applying the operating profit percentage. Division of expenses and calculation of profit percentage are important factors in calculating the wholesale price and such results are expected to help accurate calculation of the MVNO wholesale price.

• 한국군사과학기술학회지
• /
• 제19권2호
• /
• pp.211-217
• /
• 2016

The fuel cell based auxiliary power unit (APU) is promising for power source of armed vehicles due to its silence and high efficiency. Especially, the on board hydrogen generation and fed to fuel cell system was core technology of this power system. In this study, we analyzed the performance of the Auto thermal reactor (ATR) that produce the hydrogen from the fuel, integrated High temperature polymer electrolyte fuel cell (HT-PEFC) by Aspen plus software. The fuel was designed as a n-dodecane for analysis of military fuel (JP-8).

• Journal of Ginseng Research
• /
• 제31권4호
• /
• pp.217-221
• /
• 2007

Ginseng has been widely used for the management of anxiety and emotional instability, but there is little experimental evidence supporting these clinical applications. The anxiolytic-like effect of ginseng saponin and polysaccharide fractions of white (WG) and red ginsengs (RG) was investigated using the elevated plus-maze test. The saponin (SF) and polysaccharide (PF) fractions were orally administered to male ICR mice for 3 days and behavioral test for the anxiolytic activity were performed. SF significantly increased the time-spent open arms and number into the in the open arm entries. However, PF weakly increased the time-spent in the open arms, but did not increase number into the open ann entries. The WG showed more potent anxiolytic-like effect than that of RG. The anxiolytic-like activities were antagonized by flumazenil, but not by esmolol. These findings suggest the saponin fractions of WG and RG promote the anxiolytic-like activity by antagonizing GABN/benzodiazepine receptors in mice.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제27권1호
• /
• pp.209-217
• /
• 2013

The objective of this study was to evaluate the bone regeneration capability of silk membrane plus 3% 4-hexylresorcinol (3% 4-HR plus SM) in a rabbit calvarial defect model. Twenty New Zealand white rabbits were used in this study. Bilateral round shaped defects were created in the parietal bone (diameter: 8.0 mm). And the defects were covered with (1) 3% 4-HR plus SM, (2) collagen membrane (CM), (3) no graft material. After surgery, the animals were sacrificed at 4 weeks and 8 weeks. Bone regeneration was analyzed in each section by micro-computerized tomography (${\mu}$-CT). And Hematoxylin and eosin stains were used for histological analysis. As measured by ${\mu}$-CT analysis 4 weeks after surgery, the average of new bone formation in animals treated with 3% 4-HR plus SM was greater than that of animals treated with CM. and the difference was statistically significant. And well organized lamella bones were observed in the histological view of the 3% 4-HR plus SM group. Therefore, more bone regeneration was seen in animals treated with 3% 4-HR plus SM than in those treated with CM or uncovered control.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권4호
• /
• pp.433-445
• /
• 2011

Duty cycle is determined as the ratio of operating time to total time. Duty cycle in reliability prediction is one of the significant factors to be considered. In duty cycle application, non-operating time failure rate has been easily ignored even though the failure rate in non-operating period has not been proved to be small enough. Ignorance of non-operating time failure rate can result in over-estimated system reliability calculation. Furthermore, utilization of duty cycle in reliability prediction has not been evaluated in its effectiveness. In order to address these problems, two reliability models, such as MIL-HDBK-217F and RIAC-HDBK-217Plus, were used to analyze non-operating time failure rate. This research has proved that applying duty cycle in 217F model is not reasonable by the quantitative comparison and analysis.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.212-217
• /
• 1999

The wear characteristics and wear mechanisms of dental composite resins were investigated. Composite resins such as Metafil, Silux Plus, Heliomolar and Palfique Estelite were selected as specimens and contents of filler in specimens in order to evaluate the effect of Prepolymerized Particle Fillers in friction and wear characteristics. Ball on flat wear tester was used for the wear test at room temperature. The friction coefficient of Metafil was quite high relatively, and the wear resistances of Silux Plus and Palfique Estelite were better than that of Metafil and Heliomolar at the same experimental condition. It was found that The main wear mechanism is plastic flow and abrasive wear by failure of filler's bond to the matrix.

• The Plant Pathology Journal
• /
• 제40권2호
• /
• pp.205-217
• /
• 2024

Brown rot disease, caused by Monilinia spp., poses a significant threat to pome and stone fruit crops globally, resulting in substantial economic losses during pre- and post-harvest stages. Monilinia fructigena, M. laxa, and M. fructicola are identified as the key agents responsible for brown rot disease. In this study, we employed the amplified fragment length polymorphism (AFLP) method to assess the genetic diversity of 86 strains of Monilinia spp. isolated from major stone fruit cultivation regions in South Korea. Specifically, strains were collected from Chungcheong, Gangwon, Gyeonggi, Gyeongsang, and Jeolla provinces (-do). A comparative analysis of strain characteristics, such as isolation locations, host plants, and responses to chemical fungicides, was conducted. AFLP phylogenetic classification using 20 primer pairs revealed the presence of three distinct groups, with strains from Jeolla province consistently forming a separate group at a high frequency. Furthermore, M. fructicola was divided into three groups by the AFLP pattern. Principal coordinate analysis and PERMANOVA were applied to compare strain information, such as origin, host, and fungicide sensitivity, revealing significant partition patterns for AFLP according to geographic origin and host plants. This study represents the utilization of AFLP methodology to investigate the genetic variability among M. fructicola isolates, highlighting the importance of continuous monitoring and management of variations in the brown rot pathogen.

• 항공우주시스템공학회지
• /
• 제18권2호
• /
• pp.21-28
• /
• 2024

최근 뉴스페이스 시대라고 불릴 만큼 우주 산업 분야는 점점 커져가고 있으며, 초소형 위성의 중요성도 또한 커지는 추세이다. 초소형 위성은 주로 COTS 부품을 사용하며 우주급 부품에 비해 낮은 신뢰도를 가지고 있지만 개발 기간, 비용, 성능 측면에서 장점을 가지고 있어 사용성이 확대되고 있다. COTS(Commercial Off-The-Shelf)는 상용으로 판매되는 제품을 가리키며, 이는 특정 조직이나 프로젝트에서 직접 제작하는 대신 시장에서 구입하여 사용되는 것을 의미한다. 위성은 발사되는 순간부터 수리가 불가능 하기 때문에 신뢰도 예측의 중요성은 크게 작용한다. 근래에는 신뢰도 예측 시 부품에 대한 인자 뿐만 아니라 시스템 level에서의 신뢰도를 예측하는 것이 더 중요하게 적용되고 있다. 따라서 본 연구에서는 신뢰도 예측 규격인 MIL-HDBK-217F와 업데이트된 RiAC-HDBK-217Plus와 FIDES를 비교해 본다. 그리고 FIDES 예측 기준에서 다양한 산업 분야에 적용될 수 있도록 구성한 제조업체의 품질 보증 요소를 세분화하여 우주 산업에 적합한 점수가 반영될 수 있도록 하였다.

• 한국광학회지
• /
• 제26권4호
• /
• pp.217-225
• /
• 2015

본 논문에서는 이중 색지움 렌즈와 삼중 색지움 렌즈의 종색수차 보정식을 이용하여 가시광선 전대역에서 수차를 보정할 수 있는 유리 조합을 연구하고 수차가 보정된 두 렌즈를 결합하여 산업 현장에서 광범위하게 이용되고 있는 비전검사용 텔레센트릭 렌즈를 설계하였다. 그 결과 매우 넓은 파장대역 380 nm ~ 780 nm에서 파면수차를 $0.057{\lambda}$ 를 갖는 광학적 성능을 확보하였으며, 이는 기존에 시판중인 486.1 nm ~ 656.2 nm에서 수차가 보정된 텔레센트릭 렌즈들보다 우수하다는 것을 볼 수 있었다.