• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.333-339
• /
• 2007

The purpose of this study was to enhance bond performance between recycled PET (polyethylene telephthalat) fiber and cement composites through hydrophilic treatment using maleic anhydride grafted polypropylene(mPP). The mPP with various concentration of 0%, 5%, 10%, 15% and 20% to determine effect on bond behavior of recycled PET fiber were applied as experimental variables. Dog bone shaped specimens according to JCI SF-8 was applied to evaluate the bond strength and pullout energy. The results showed increased bond strength and pullout energy as concentration of mPP. Concentration of 15% mPP showed the most effective results while 20% showed reduced performance results. Because 15% mPP ensures perfect coating while 20% makes thick coating area that resulted in crack propagation and consequent separation of PET fiber and coated area during pullout load occurred. Enhancement mechanism of bond performance of recycled PET fiber and cement composites with each concentration of mPP could be conformed through investigation of microstructure of fiber surface.

• Journal of Korea Foresty Energy
• /
• v.7 no.1
• /
• pp.1-10
• /
• 1987

This study was carried out to estimate the aboveground biomass of Cryptomeria japonica and Chamaecyparis obtusa which was planted in Changsong district, the southern part of the Korean peninsula. Nine sample trees at each plot(20m x 20m drom C. japonica of 20-year-old and C. obtusa of 25-year-old, according to DBH distribution. were felled to measure the dry weights of stem, branches and leaves sectioned respectively. Since it is very difficult to separate leaves from twigs. all green parts including pure leaves and twigs were tentatively treated as 'leaves'. 1. The logarithmic regression equations between dry weight of each component (stem. branches. leaves land the variable of $(DBH)^2{\cdot}H$ were obtained (Table 6). The aboveground standing crops was estimated 108. 75ton/ha in C. japonica and 112.56 ton/ha in C. obtusa. Percentage of each part based on the aboveground standing crop in stand was and in order of stem >leaves>branches for C. japonica and in order of stem> branches> leaves for C. obtusa repectively. 2. Net production of each stand was estimated as 1:3.32ton/ha/yr in C. japonica and 11.69ton/ha/yr in C. obtusa. and its composition was in order of stem>leaves>branches for both species. 3The net assimilation rate was estimated as 1.10 and 1.2lkg/kg/yr, the efficiency of leaves to produce stem was 0.71 and 0.75 kg/kg/ha and biomass accumulation ratio was 8.16 and 9.63kg/kg/yr in each stand of C. japonica and C. obtusa respectively.

• Structural Engineering and Mechanics
• /
• v.57 no.2
• /
• pp.357-367
• /
• 2016

This paper illustrates an experimental study on a self compacting polymer concrete called isobeton made of polyurethane foam and expanded clay. Several experiments were conducted to characterize the physic-mechanical properties of the considered material. Application of the Linear Elastic Fracture Mechanics (LEFM) and determining the toughness of two isobetons based on Belgian and Italian clay, was conducted to determine the stress intensity factor $K_{IC}$ and the rate of releasing energy $G_{IC}$. The material considered was tested under static and dynamic loadings for two different samples with $10{\times}10{\times}40$ and $10{\times}15{\times}40cm$ dimensions. The result obtained by the application of the Linear Elastic Fracture Mechanics (LEFM) shows that is optimistic and fulfilled the physic-mechanical requirement of the study.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.66-73
• /
• 1985

Factors affecting isolation and fusion of protoplasts of three Quercus species were investigated and procedures for isolation, purification and fusion of protoplasts of the three species were also established. Unhardened leaves and rapidly growing callus cultures were good source of viable protoplasts. The optimum composition of enzyme mixture for rapid isolation of protoplasts from leaf mesophyll tissues and calli was Cellulase Onozuka R-10 (20g/l, Macerozyme R-10(10g/l), Pectinase(250 units/l, $CaCl_2$, $2H_2O$(14mM), $MgSO_4{\cdot}7H_2O$(1.8mM), $KNO_3$(1.0mM), $H_3BO_3$(1.0mM), $KH_2PO_4$(0.2mM), KI($1.0{\mu}M$), 1,4-dithiothreitol (0.1mM) and mannitol (0.6M). Optimum density of protoplasts for maximum fusion was $2{\times}10^5/ml$ which was the highest protoplast density given in this study. Optimum concentration and duration of PEG 1450 treatment for inducing fusion appeared to be 29%(W/V) final PEG 1450 concentration and 5-10 minutes, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.4
• /
• pp.259-267
• /
• 2002

We present a novel 3D fabrication method with single X-ray process utilizing an X-ray mask in which a micro-actuator is integrated. An X-ray absorber is electroplated on the shuttle mass driven by the integrated micro-actuator during deep X-ray exposures. 3D microstructures are revealed by development kinetics and modulated in-depth dose distribution in resist, usually PMMA. Fabrication of X-ray masks with integrated electrothermal xy-stage and electrostatic actuator is presented along with discussions on PMMA development characteristics. Both devices use $20-\mu\textrm{m}$-thick overhanging single crystal Si as a structural material and fabricated using deep reactive ion etching of silicon-on-insulator wafer, phosphorous diffusion, gold electroplating, and bulk micromachining process. In electrostatic devices, $10-\mu\textrm{m}-thick$ gold absorber on $1mm{\times}1mm$ Si shuttle mass is supported by $10-\mu\textrm{m}-wide$, 1-mm-long suspension beams and oscillated by comb electrodes during X-ray exposures. In electrothermal devices, gold absorber on 1.42 mm diameter shuttle mass is oscillated in x and y directions sequentially by thermal expansion caused by joule heating of the corresponding bent beam actuators. The fundamental frequency and amplitude of the electrostatic devices are around 3.6 kHz and $20\mu\textrm{m}$, respectively, for a dc bias of 100 V and an ac bias of 20 VP-P (peak-peak). Displacements in x and y directions of the electrothermal devices are both around $20{\;}\mu\textrm{m}$at 742 mW input power. S-shaped and conical shaped PMMA microstructures are demonstrated through X-ray experiments with the fabricated devices.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.4
• /
• pp.34-42
• /
• 2012

In this paper, a wide-input range CMOS multi-mode rectifier for wireless power transfer system is presented. The output voltage of multi-mode rectifier is sensed by comparator and switches are controlled based on it. The mode of multi-mode rectifier is automatically selected by the switches among full-wave rectifier, 1-stage voltage multiplier and 2-stage voltage multiplier. In full-wave rectifier mode, the rectified output DC voltage ranges from 9 V to 19 V for a input AC voltage from 10 V to 20 V. However, the input-range of the multi-mode rectifier is more improved than that of the conventional full-wave rectifier by 5V, so the rectified output DC voltage ranges from 7.5 V to 19 V for a input AC voltage from 5 V to 20 V. The power conversion efficiency of the multi-mode rectifier is 94 % in full-wave rectifier mode. The proposed multi-mode rectifier is fabricated in a $0.35{\mu}m$ CMOS process with an active area of $2500{\mu}m{\times}1750{\mu}m$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.175-180
• /
• 1992

For the effective utilizing of polyunsaturated lipids in filefish viscera wasted from marine manufactory the conditions of degumming, deacidification, decoloring and deodorization for the processing of refined viscera oil were investigated. In the process of refining degumming with 20$m\ell$ of 4% oxalic acid per 100$m\ell$ of crude filefish viscera oil resulted in the lowest residual phosphorus content as 115.8 ppm and optimal condition to neutralize the filefish viscera oil was treating for 30min at 60$^{\circ}C$ with 0.5% excess of 4M sodium hydroxide solution. Decoloring was optimized by adding 10% bleaching earth and treating for 20min at 60$^{\circ}C$ under vacuum, and deodorizing was done by steam distillation at 180$^{\circ}C$ under 4 torr of vacuum.

• Research in Plant Disease
• /
• v.18 no.3
• /
• pp.250-254
• /
• 2012

In July 2011, hundreds of garden cosmos (Cosmos bipinnatus) were found to be infected with a white smut in Namyangju. Further surveys in central Korea showed that the disease occurred in all the nine localities visited, with disease incidence rate of >50%. Symptoms manifested as pale-green to chlorotic areas on the leaves, followed by white mildew development on lesions. The lesions usually coalesced and became necrotic, considerably reducing the aesthetic value. Caespituli were initially hypophyllous but later epiphyllous as well. Conidiophores were 10-40 in moderately dense fascicles, hyaline throughout, mostly guttulate, $20-45{\times}2-4{\mu}m$, obtuse at the apex, and had inconspicuous conidial scars. Conidia were solitary, botuliform, hyaline, aseptate, mostly guttulate, apex rounded, base rounded to truncate, $17-24{\times}3.5-5{\mu}m$, hilum inconspicuous, unthickened, and not darkened. Sori were rounded to elongated, resulting in first white and later brown leaf spots. Teliospores embedded in the leaf tissue were subglobose to ellipsoidal, subhyaline to pale yellowish-brown, $12.5-20{\times}10-15{\mu}m$. These morphological characteristics corresponded with those of Entyloma cosmi V$\acute{a}$nky, Horita & Jage. This is the first report of white smut disease of garden cosmos due to infection of E. cosmi in Korea.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.701-709
• /
• 2011

This study was performed to establish an effective extraction method of pig placenta extract that could be used for a putative functional food supplement with immunomodulatory effects. In the present study, we used different temperatures (4, 37, 60, 80, and $100^{\circ}C$) and different solvents (chloroform, NaOH, and phosphate buffered saline [PBS]) to extract the pig placenta. Among the different placenta extracts yielded by the different extraction methods, placenta extract (PE) in PBS at $80^{\circ}C$ for 30 min (referred to as PE-PBS80) showed a significant increase of nitric oxide production of up to 22.97 ${\mu}M/10^5$ cells at a 1 mg/mL dose (p<0.05 ) in J774A.1 cells than other extracts and control tested. Using PE-PBS80, further animal challenges were performed to identify the immune-enhanced effects. As a result, orally administered PE-PBS80 showed a significant increase in blood T and B cell activities and immunoglobulin (IgG and IgM) production. IgG and IgM levels increased to 41.53 mg/mL at a 20 mg dose on day 7 and to 27.38 mg/mL at a 10 mg dose on day 14, respectively (p<0.05). Furthermore, PE-PBS80 was also able to significantly enhance the immune modulator cytokine levels (p<0.05) compared to the control and vehicle treatments. Among the evaluated cytokines, the tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) level increased to 28.89 pg/mL at extract doses of 20 and 50 mg, the interleukin-$1{\beta}$ (IL-$1{\beta}$) level increased to 21.52 pg/mL at extract doses of 10, 20, 50 and 75 mg and the interferon (IFN)-${\gamma}$ level increased to 18.24 pg/mL at extract doses of 10, 20, and 50 mg. Therefore, this study presents an effective method for extracting pig placenta extracts and also demonstrates that pig placenta extracts had significant immunomodulatory effects not only at the cellular level but also in a mouse model, suggesting that this material could be used as an excellent candidate functional food supplement.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.1-9
• /
• 2017

Forest harvest as large scale artificial disturbance makes edge environment in both clear-cutted and forested habitat. To clarify the development and recovery process of forest edge after disturbances is essential to understand vegetation responses and landscape level consequences such as edge-distance. In Korea, after clear-cutting, edge-related changes of environment and vegetation was not clarified yet. In Korean red pine (Pinus densiflora) forest, by applying space-for-time approach (sites with undisturbed and 1, 3, 10, 16 yr after cutting), the edge-related change of plant abundance and abiotic factors were determined for 20 line-transect (60 m) and 340 ($1m{\times}5m$) quadrats, and clarified depth and duration of the disturbance. Immediately after edge formation, within 15m form the edge, biotic and abiotic factors such as cover, richness, canopy openness, temperature and moisture content exhibited larger changes compared to forest interior. Plant abundance and abiotic variables were stabilized at the level of forest inside within 16 yr and 10 yr after edge creation, respectively. Woody (tree and shrub) species generally was showed larger increment with proximity to edge than did herb or graminoid species. In addition, negative interactions between woody and herbaceous species were detected during the period of forest edge closure. Our results suggested that depth of forest edge formed by clear-cutting of Korean red pine forest was at least from 15 m to 20 m and edge effect were likely sustained more than 16 years. As the first empirical study on edge-distance between two contrast habitats of clear-cutted and adjacent forest in South Korea, the analytical reality on landscape structure and habitat patches can be improved.