• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2021

To investigate the effect of freshwater discharge on the seawater circulation in the semi-closed harbor, a 3-D hydrodynamic model was applied to the International Ferry Terminal (IFT). The model run is conducted for 45 days (from May 15 to June 30, 2020), and the reproducibility of the model for time-spatial variability of current velocity and salinity was verified by comparison with model results and observation data. There are two sources of freshwater towards inside of the IFT: Han River and water reservoir located in the eastern part of IFT. In residual current velocity results, the two-layer circulation (the seaward flow near surface and the landward flow near bottom)derived from the horizontal salinity gradient in only considering the discharge from a Han River is more developed than that considering both the Han River and water reservoir. This suggests that the impact of freshwater from the reservoir is greater in the IFT areas than that from a Han River. Additionally, the two-layer circulation is stronger in the IFT located in southern part than Incheon South Port located in northern part. This process is formed by the interaction between tidal current propagating into the port and freshwater discharge from a water reservoir, and flow with a low salinity (near 0 psu) is delivered into the IFT. This low salinity distribution reinforces the horizontal stratification in front of the IFT, and maintains a two-layer circulation. Therefore, local sources of freshwater input are considered to estimate for mass transport process associated with the seawater circulation within the harbor and It is necessary to perform a numerical model according to the real-time freshwater flow rate discharged.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.67-79
• /
• 2020

This study analyzed the start-up education curriculum and start-up education programs of seven universities in the U.S. to find out what courses are provided, what various programs exist, and what the characteristics of start-up education in each university are. California State University, San Bernardino / University of California, Irvine / Drexel University / Oklahoma State University / Florida State University / San Diego State University / University of Southern California where entrepreneurship education based on the Entrepreneurship Degree Course is being established based on the Entrepreneurship Center of seven universities in the United States, which is not well introduced in Korea. This study examined how the start-up education courses and start-up support systems at seven universities in the U.S. are progressing at the undergraduate, MBA, master's and doctoral levels, and comparative levels. Through the case studies of the universities presented, the primary analysis was carried out to explore the various characteristics of American university start-up education. The implications of start-up education at American universities in this study are as follows. First, in order for universities to take the initiative in providing start-up education, they should be organized to suit the course of start-up education suitable for the characteristics of universities and introduce support programs. Second, it is necessary to establish an independent center within domestic universities to be operated autonomously. Third, the start-up education of universities should include building university-industry partnerships, operating entrepreneurship degree courses and collaboration between departments of universities. Fourth, the independent center should lead the active participation of alumni and local start-ups and start-up-related programs should be operated based on this. Fifth, Differentiated programs for each university's characteristics should be introduced and applied to universities. Although case studies have limitations that cannot be generalized, they can provide a useful framework. Therefore, it is necessary to design a systematic start-up education that reflects the correct design direction and characteristics of each university.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.167-187
• /
• 2020

Currently, Korea is changing into an ultra-aging society, and office workers retire at the age of 49.5 on average from their main jobs, and the national pension is delayed from 62 years old to 65 years old by 2034, so research is needed to prepare for the aging of office workers after retirement. The purpose of this study is to examine the factors affecting the intention to start a business after retirement and the mediating effect of another sense of success expectation on life after retirement, targeting office workers nationwide. Changes in individual attitudes and systematic institutional support are needed to prepare for a sustainable job until the age of 100 after retirement, that is, a start-up utilizing wisdom and experience in work life. As a result of the study, the ability to perform the goal as job performance, economic preparation for retirement preparation, preparation for external relations, and future anxiety have a positive effect on the entrepreneurial will, and the ability to use new technologies as job performance, and physical preparation for retirement. Preparation and preparation for internal relations were found to have no effect. In the influencing relationship between preparation for external relations and the will of start-up, and future anxiety and will of start-up, another sense of success was confirmed to have a partial mediation effect. In the relationship between economic preparation and willingness to start a business, the effect of complete mediation was confirmed. In order to increase the will to start a business after retirement, it was confirmed that another sense of expectation for success was an important variable. Introducing a government-sponsored education system in the company to reduce the government's financial burden due to super-aging and achieve corporate growth through employee training while potential founders, office workers, are employed, and entrepreneurship and goals for the three life goals of office workers By introducing a performance improvement program, we were able to get implications that would be a solution to the growth of individuals and businesses and reducing the government's financial burden.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.280-301
• /
• 2021

Chogak has been regarded as originating from the paintings decorating building elements. Various curved shape drawings that were first seen in the paintings of Goguryeo tomb murals evolved into the vine patterned Dancheong of Geuklakjeon in Bongjeongsa. Cheomcha of Geuklakjeon was chiseled with Yeonhwadusik relievo at the bottom on top of Dancheong, and this was the beginning of Cheomcha-Chogak. Also, Cheomcha, which was carved with a preliminary vine patterned Chogak in Daeungjeon in Bongjeongsa, opened the era of engraving Chogak directly on the surface of structural elements. Since then, vine patterned Chogak was a significant decoration technique for the Cheomcha of traditional wooden construction for a long time. Because Jeongjagak is a structure that was continuously built between the end of the Japanese invasion of Korea in 1592 and the late Joseon Dynasty, the transition of Cheomcha-Chogak over time can be seen through Jeongjagak architecture. The early Cheomcha-Chogak presents stems that climb up (Upbound-type) towards the headpiece on a column, while stems of Chogak later reversed direction to descend (Downbound-type) from the headpiece. This study examined the transition process and reasons for the change, with a focus on the findings above, and identified a new type of Chogak that is unrelated to the direction type and was adopted during the transition from Upbound-type to Downbound-type. The new type appeared when the Jeongjagaks for the Royal Tomb of Kyeongjo and those of the Injo were built, and it matches with the transitional period wherein lotus vanishes from Hwaban-Chogak. The study also inferred that the direction change of Cheomcha-Chogak stems was caused by the separation of vine patterned Chogak, carved with a two-stepped inner Ikgon, into both upward and downward from the headpiece, and this led to the changes that manifested as the inside of Choikgong being the Downbound-type Chogak and the variegated vine patterned Chogak of Choikgong affecting the direction of Cheomcha-Chogak. This is the follow-up study of "A Study on the Hwaban-Chogak of the Neungwon-Jeongjagak," a paper published in 2018, and is limited in n that Cheomcha, the focus of the research, is just one of the construction elements of Jeongjagak. The entirety ofChogak cannot be understood only by observing Cheomcha.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.135-154
• /
• 2020

This paper analyzes the 5,521 samples of the small and medium-sized businesses(SMBs) obtained from the Korea Credit Guarantee Fund. From January 2014 to September 2019, 85% of the SMBs have 5 or fewer full-time employees. The proportion of SMBs is overwhelmed by the elderly men, and most founders are the CEO. Also, about 87% of the workplace types are rented, while 64% of the CEO's residence types are owner-occupation. 47% of the financial grade score is less than 10 points out of 100 and 80% of SMBs have less than 200 million won of the loan guarantee. In particular, the total guarantee loan amount or the days of net guarantee have significantly positive relations with the working period of the CEO in the same industry, the number of employees, the operation period of SMBs, and the corporate business type. In the case of the financial grading score which has the highest weight in overall credit rating gets higher with the higher number of employees, the longer the operation period, and the corporate business type. However, the quantified non-financial grading score has no significant relationship with other explanatory variables, except for the corporate business type. This implies that a non-financial grade score is measured by other determinants that are not observed by the Korea credit guarantee fund. The pure non-financial grade score has positive relations with the working period of the CEO. Overall, this paper would help Korean SMBs upgrade their credit ratings and expand the money supply when there is no standardized credit rating model or no publicly available evaluation criteria for SMBs. We expect this paper provides important insights for further research and policy-makers for SMBs. In particular, to address the financial needs of thin-filers such as SMBs, technology-based financial services (TechFin) would use alternative data to evaluate the financial capabilities of thin-filers and to develop new financial services.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.27-42
• /
• 2020

Startup accelerators have emerged as new investment entities that help early startups, which are not easy to survive continuously due to lack of funds, commercialization capabilities, and experiences. As their positive performance on early startups and the ecosystem has been proven, the number of early startups which want to receive their investment is also increasing. However, they are vaguely preparing to attract accelerators' investment because they do not have any information on what factors the accelerators consider important. In addition, researches on startup accelerators are also at an early level, so there are no remarkable prior studies on factors that decide on investment. Therefore, this study aims to help startups prepare for investment attraction by looking at what factors are important for accelerators to invest, and to provide meaningful implications to academia. In the preceding study, we derived five upper level categories, 26 lower level accelerators' investment determinants through the qualitative meta-synthesis method, secondary data analysis, observation on US accelerators and in-depth interviews. In this study, we want to derive important implications by deriving priorities of the accelerators' investment determinants. Therefore, we used AHP that are evaluated as the suitable methodology for deriving importance and priority. The analysis results show that accelerators value market-related factors most. This means that startups that are subject to investment by accelerators are early-stage startups, and many companies have not fully developed their products or services. Therefore, market-related factors that can be evaluated objectively seem to be more important than products (or services) that are still ambiguous. Next, it was found that the factors related to the internal workforce of startups are more important. Since accelerators want to develop their businesses together with start-ups and team members through mentoring, ease of collaboration with them is very important, which seems to be important. The overall priority analysis results of the 26 investment determinants show that 'customer needs' and 'founders and team members' understanding of customers and markets' (0.62) are important and high priority factors. The results also show that startup accelerators consider the customer-centered perspective very important. And among the factors related to startups, the most prominent factor was the founder's openness and execution ability. Therefore, it can be confirmed that accelerators consider the ease of collaboration with these startups very important.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.1
• /
• pp.29-33
• /
• 2021

Purpose Plasma renin activity (PRA) test is important for the diagnosis of primary aldosteronism. PRA is an easily deformed substance in vitro and affected by temperature changes. Laboratory of ASAN medical center has consistently found that there was a difference between the initial and re-experimental results. We compared and analyzed the differences in PRA test results according to the sample storage status. Materials and Methods The measurement of PRA was performed by using the radioimmunoassay. From August to September 2020, 43 PRA re-test samples were tested with different sample storage condition. The first group was re-examined by freezing the plasma-separated samples at -18℃, and the second group was re-examined with refrigerated EDTA sample. Also, additional tests were conducted on 13 PRA samples to verify the effect on thawing temperature differences in plasma-separated samples. The same samples were divided into two parts and stored frozen at -18℃, respectively, and thawing samples in room temperature and those in refrigerator were were conducted. Each result was compared and analyzed based on the initial experimental results. Results The results of re-examination after frozen storing plasma separation samples showed a lower correlation than the results of re-examination with EDTA plasma samples in refrigerator. When calculating the percentage based on the initial test results, the average percentage of each was 404.9% and 133.8%. The correlation coefficient was also R=0.8501 and R=0.9966, respectively, showing a higher correlation between plasma in the refrigerated sample EDTA tube. In comparison experiments with differences in thawing temperature, average percentage of the results of initial test and room temperature thawing was 94.3% and the average percentage of the results of refrigerated thawing was 88.0%. After again freezing the sample, the average percentage of the second room temperature thawing result is 107.5%, and the second refrigerated thawing group is 112.7%. Both groups showed an increase from first thawing. Conclusion A comparative analysis of retesting according to differences in sample storage methods in PRA tests showed a higher correlation between the results of retesting of the refrigerated EDTA plasma. And repeated freezing and melting of plasma separation samples, regardless of temperature during defrosting, has been shown to affect results. Therefore, retest of PRA should re-collect plasma from original EDTA plasma to increase reproducibility.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.217-232
• /
• 2021

This study calculated the productivity and cost of extraction and processing of logging residues by cut-to-length (CTL) and whole-tree (WT) harvesting methods. In addition, the comparative analysis of the characteristics of wood chip fuel to examine whether it was suitable for the fuel conditions of the energy facility. In the harvesting and processing system to produce the wood chips of logging residues the system productivity and cost of the CTL harvesting system were 1.6 Gwt/SMH and 89,865 won/Gwt, respectively. The productivity and cost of the WT harvesting system were 2.9 Gwt/SMH and 72,974 won/Gwt, respectively. The WT harvesting productivity increased 1.3times while harvesting cost decreased by 18.7% compared to the CTL harvesting system. The logging residues of wood chips were not suitable for CTL wood chips based on International Organization for Standardization (ISO 17225-4:2021) and South Korea standard (NIFoS, 2020), but the quality (A2, Second class) was improved through screening operation. The WT-unscreened wood chips conformed to NIFoS standard (second class) and did not conform to ISO but were improved through screening operation (Second class). In addition to the energy facility in plant A, all wood chips except CTL-unscreened wood chips were available through drying processing. The WT-unscreened wood chips were the lowest at 99,408 won/Gwt. Plants B, C, and D had higher moisture content than plant A, so WT-unscreened wood chips without drying processing were the lowest at 57,204 won/Gwt. Therefore, the production of logging residues should improve with operation methods that improve the quality of wood chips required for applying the variable biomass and energy facility.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.358-364
• /
• 2021

This study was conducted to select a desiccant and determine its concentration for safe usage to improve the harvesting efficiency of soybeans. Soybeans were treated with a desiccant (non-selective herbicide) before and after the maturation stage. The drying effect of the desiccant was higher at earlier treatment times than at the maturation stage, but the difference was not statistically significant. The higher efficacy might be related to the drying process of the leaves and stems, with most of the leaves and stems having already been dried by the time of hand harvesting. Desiccant treatments had no adverse effects on soybean yield, weight of 100 grains, seed quality, or seed germination rate compared with the untreated control. Pesticide residue analysis showed minimum residue concentration to be lower than the tolerance level of pesticide residues. In conclusion, it was confirmed that the desiccant was effective in drying soybean, and that there was no damage to the quality of soybean seeds. In addition to the drying effect, the dessicant treatment also facilitates the removal of weeds that interfere with the mechanical harvest and improves harvesting efficiency through the drying of the growth imbalanced individual. The desiccant treatment is expected to shorten the mechanical harvesting time by 1-2 weeks. It is thought that the selection of the proper cultivation period for other crops after soybean cultivation will be more advantageous.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.392-402
• /
• 2021

The present study investigated the effects of tillage practices (deep cultivation [DC] and conventional tillage [CT]) and extended planting dates (mid-June to July) for maize-onion rotation in paddy fields. The silage corn (Zea mays L.) cultivar 'Kwangpyeongok' and the waxy corn cultivar 'Ilmichal' were planted on June 14, July 3, and July 15 in 2019. In both maize, the plant height of June 14 planted was up to 100 cm greater than that of July 15 planted on August 16 and up to 40 cm on August 30. At 30 Days after planting, the leaf area index (LAI) of silage corn planted on July 3 and 15 greater than that of corn planted on June 14 due to high temperature in the early season; however, there were no differences in the LAI of waxy corn according to the planting date. Despite favorable temperature, plants sown on July 3 and 15 experienced high moisture stress during the seedling stage due to consistent rainfall, and waxy corn was highly sensitive to high moisture stress. The total yield of silage corn was 1,232 (845 in TDN), 860 (598 in TDN), and 765 (508 in TDN) DW kg·10a^-1 for plants sown on June 14, July 3, and July 15, respectively. The fresh marketable ear yield of waxy corn was 872, 814, and 525 FW kg·10a^-1 for plants sown on June 14, July 3, and July 15, respectively. After the completion of maize cultivation, onion seedlings (Allium cepa L.) were transplanted on November 12, 2019, and harvested on May 27, 2020. Neither summer tillage nor maize planting date affected onion growth or yield. The marketable onion yield was 8,305 and 7,848 kg·10a^-1 with DC and CT, respectively. In conclusion, DC did not improve maize growth or yield under paddy conditions. Mid-June to early July is a practical window for maize planting for growers in this region.