• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.856-860
• /
• 2007

In this paper, we propose a microstrip antenna with sufficient impedance bandwidths and gains for the 2.65GHz antenna which used in the satellite digital multimedia broadcasting. The proposed 2.65GHz S-DMB bandwidth microstrip antenna on a substrate, which is small enough to be installed in practical mobile phones, and described simulation feature using by CST Microwave Studio program. The measured result is similar with commercial antenna and acceptable frequency band is found that more wide than the existing products.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2217-2226
• /
• 2007

In this paper, we propose a microstrip antenna with sufficient impedance bandwidths and gains for the 2.65GHz antenna which can be used in the satellite digital multimedia broadcasting. The prposed 2.65GHz satellite DMB bandwidth microstrip antenna is implemented on a substrate, which is small enough to be installed in practical mobile phones, and described simulation feature using by CST MicroWave Studio program. And also, we measured the antenna performance between the proposed antenna and the commercial antenna. From the analysis, it was found that the radiation pattern of proposed antenna is superior to the commercial antenna and an acceptable frequency band is more wider than the existing products.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.87-92
• /
• 2004

In this paper, a microstrip slot antenna with a fork-shaped feedline is designed and fabricated. To obtain a broadband characteristic of a wide slot antenna a feedline is transformed into a shape of a fork, and a size of the slot and offset - length is varied. As the characteristics of the slot antenna as the function of design parameters are analyzed, a broadband microstrip slot antenna is designed. The microstrip slot antenna with a fork-shaped feedline is fabricated and its measured bandwidth is from 1.65 GHz to 6.20 GHz for VSWR$\leq$2.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.93-98
• /
• 2016

The purpose of this study is to design for MOB antenna attached on safety helmet using microstrip patch antenna. The patch antenna is fabricated in 0.2 mm FR-4 substrate with $64{\times}64mm$ size. The proposed antenna is based on a slot-ring design which cover Inmarsat (1.52 ~ 1.65 GHz) and GPS (1.575 GHz) frequency band. To obtain the optimized parameters, HFSS simulator is used, and antenna is designed by optimized parameters. After antenna was etched, SMA connector was attached to the microstrip feeding line and the result between antenna simulation and measurement was analyzed. Proposed antenna is satisfied the -10 dB bandwidth requirement while simultaneously covering the 1.53 ~ 1.65 GHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.82-86
• /
• 2009

In this paper, we have studied on the microstrip antenna for satellite DMB from 2.63 to 2.65 GHz. Microstrip patch antenna was designed using HFSS simulation program and fabricated by FR4 substrate that has substrate thickness of 1.6mm, metal thickness of $17{\mu}m$, and dielectric constant of 4.4, respectively.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.665-669
• /
• 2018

In this paper, we design an antenna for LTE / Wi-Fi communication that operates in 2.65 GHz and 5 GHz band for small-sized broadband communication antenna that can be used in the sea. Microstrip patch antennas were chosen to improve the bandwidth. The slot width, length, and transmission line width were calculated using the theoretical formula for each step. In addition, we designed a microstrip antenna using CST Microwave Studio 2014 program that can design 3D. Simulation results show that the reflection lossis -12.712 dB at 2.65 GHz and -16.583 dB at 5 GHz. The gain was 1.738 dBi at 2.65 GHz and 3.284 dBi at 5 GHz. In this paper, we propose a dual-band antenna for LTE / Wi-Fi, which can be used in maritime environments, which is worse than terrestrial communication, because of differences in communication speed and communication stability compared with those used on land.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.581-585
• /
• 2013

A technique to expand the operating impedance bandwidth of a microstrip patch antenna is presented. The antenna is fed by a truncated T-shaped microstrip line on the ground plane with the rectangular slot. The proposed microstrip patch antenna offers wide bandwidth characteristics with the rectangular slot which has optimized size and position on the ground plane. The simulation result shows a fractional bandwidth of 127.8 %(0.65 to 2.95 GHz) at VSWR 2:1.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.151-155
• /
• 1999

We proposed the beam tilted antenna by aperture coupled microstrip array, found out the values of design parameters by using Ensemble 5.1 of Ansoft Co., and analysed the performance of fabricated antenna. In order to point to the fixed satellite on the nothern hemisphere, 3 dB beamwidth of this antenna is 25$^{\circ}C$ to 65$^{\circ}C$. Operation bandwidth is 2.51GHz to 2.59GHz. The structure of this antenna is composed by 3 types of squared patches; reflector, driver, and director. The maximum antenna gain is 6.2dB at 2.56GHz and elevation angle of 42$^{\circ}C$. Front-to-Back ratio is more than 13dB at the same condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.65-67
• /
• 2015

In this paper, small WLAN antenna was designed and investigated. Proposed antenna was configured for microstrip patch antenna ($29mm{\times}29mm$) that was mounted on RF4 dielectric substrate (relative permittivity 4.4, thick 1.6mm, tangent loss 0.025) with $45mm{\times}45mm$. In order to obtain a wide band characteristic, the cutting process was 3.2mm diagonal corners of the patch antenna located on the top of the substrate. Antenna feeding position for 50 ohm impedance matching was decided to be 5.1mm at the central axis in the horizontal direction. As a result, frequency bandwidth satisfying the condition of VSWR<2dB was 2.365-2.45GHz (85MHz, 3.53%) for considering WLAN.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.563-567
• /
• 2010

In this paper, circularly polarized micro-strip GPS of 1.57 GHz and DMB of 2.63~2.65GHz antenna have been studied. In order to improve of frequency properties, parameters such as patch size, corner truncated type, and feed positions were simulated using HFSS program. GPS and DMB antenna were fabricated and characteristics were measured using network analyzer.