• 자원환경지질
• /
• 제18권3호
• /
• pp.225-237
• /
• 1985

Mineralization of Daehwa and Donsan W-Mo deposits can be devided into three distinct depositional stages on the basis of mineral paragenesis and flnid inclusion studies; stage I, deposition of oxides and silicates ; stage II, deposition of base-metal sulfides and sulfosalts with carbonates; stage III, deposition of barren calcite and fluorite. Tungsten, molybdenum and tin mineralization occurred in stage I. Fluid inclusion studies reveal that ore fluid of stage I were homogeneous $H_2O-CO_2$ fluids containing 3.5~14.6 mol % $CO_2$. Minimum temperature and pressure of stage I ore fluids were $240^{\circ}C$ and 500 bars respectively. Salinities of aqueous type I inclusions in minerals of stage I range from 3.7 to 7.6 wt. % equi. NaCl. whereas those of $CO_2$-containing type III inclusions range from 0.3 to 4.4 wt. %. Temperatures of stage II ore fluids range from 200 to $305^{\circ}C$ on the whole and salinities were in the range of 3.2~7.2 wt. %. Homogenization temperatures of fluid inclusions in calcite and fluorite of stage III range from 114 to $186^{\circ}C$ and salinities were in the range of 0.9~4.3 wt. %. Sulfur fugacities during stage II deduced from mineral assemblages and tamperature data from fluid inclusions declined from earlier to later in the range of $10^{-11}{\sim}10^{-18}atm$. Fluid inclusion evidences suggest that the dominance of $CO_2$ in ore fluid during W-Mo mineralization is the characteristic features of Cretaceous W-Mo deposits of central district of Korea compared to those of Kyeongsang basin district.

• 한국농공학회지
• /
• 제24권4호
• /
• pp.69-79
• /
• 1982

The objective of this study is to contribute to drainage planning in the most realistic and economical way by establishing the relationship between rice yield reduction and overhead flooding by muddy water of each growth stage of paddy, which is the most important factor in determining optimum drainage facilities. This study was based on the data mainly from the experimental reports of the Office of Rural Development of Korea, Reduction Rate Estimation for Summer Crops, published by Ministry of Agriculture and Forestry of Japan and other related research documenta- tion. The results of this study are summarized as follows 1. Damages by overhead flooding are highest in heading stage and have the tendency of decrease in the order of booting stage, panicle formation stage, tillering stage, and stage just after transplanting. Damages by overhead flooding of each growing stage are as follows: a) It is considered that overhead flooding just after transplanting gives a little influence on plant growth and yield because the paddy has sufficient growth period from floo ding to harvest time. b) Jt is analyzed that according to the equation y=11 12x 0.908 which is derived from this study, damages by overhead flooding during tillering stage for 1, 2, 3 successive days are 11.1 %, 20.9%, and 30.2% respectively. c) Damages by overhead flooding after panicle formation stage are very serious because recovering period is very short after damage and ineffective tillering is much. Acc- ording to the equation y=9. 58x+10. Ol derived from this study, damages by overhead flooding fal 1,2,3,5 successive days are 19.6%, 29.2%, 38.8%, 57.9% respectively. d) Booting stage is the very important period in which young panicle has grown up almost completely and the number of glumous flower is fixed since reduction division takes place in the microspore mother cell and enbryo mother cell. According to the equation y=39. 66x 0.558 derived from this study, damages by overhead floodingfor 0.5, 1, 3, 5 successive days are 26.9%, 39.7%, 72. 2% and 97.4%, respectively. Therefore, damages by overhead flooding is very serious during the hooting stage. e) When ear of paddy emerges, flowering begins on that day or the next day; when paddy flowers, fertilization will be completed 2-3 hours after flowering. Therefore overhead flooding during heading stage impedes flowering and increases sterilizing percentage. From this reason damages of heading stage are larger than that of booting stage. According to the equation y-41 94x 0.589 derived from this study, damages by overhead flooding for 0.5, 1, 3, 5, successive days are 27.9%, 63.1 %, 80.1%, and 100% 2. Considering that temperature of booting stage is higher than that of beading stage and plant height of booting stage is ten centimeters shorter than that of heading stage, booting stage should be taken as a critical period for drainage planning because possi- bility of damage occurrence in booting stage is larger than that of heading stage. There-fore, it is considered that booting stage should be taken as critical period of paddy growth for drainage planning. 3. Overhead flooding depth is different depending on the stage of growth. In case, booting stage is adopted as design stage of growth for drainage planning, it is conside red that the allowable flooding depth for new varieties and general varieties are 70cm and 80cm respectively. 4. Reduction Rate Estimation by Wind and Flood for Rice Planting of the present design criteria for drainage planning shows damage by overhead flooding for 1 to 2, 3 to 4, 5 to 7 consecutive days; damages by overhead flooding varies considerably over several hours and experimental condition of soil, variety of paddy, and climate differs with real situation. From these reasons, damage by flooding could not be estimated properly in the past. This study has derived the equation which shows damages by flooding of each growth stage on an hourly basis. Therefore, it has become possible to compute the exact damages in case duration of overhead flooding is known.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.63-72
• /
• 2013

The main purpose of this study is to analyze the collection characteristics of multi-layer multi-stage porous plate system with ionizer and dielectric-substance experimentally. The experiment is carried out to analyze the characteristics of pressure drop and collection efficiency for the present system with experimental parameters such as applied voltage, inlet velocity, stage number and inlet particle concentration, etc. In results, for multi-layer multi-stage porous plate system of inflow type, at 5 stage and $v_{in}$=2.58 m/s, the pressure drop becomes lower 15 $mmH_2O$ as 95 $mmH_2O$ than that of non-inflow type system. It is estimated that for the present system with ionizer and dielectric-substance, the collection efficiency represents 98.5% showing higher 5.2% comparing to that of multi-layer multi-stage porous plate system without ionizer and dielectric-substance at 5 stage, $v_{in}$=2.58 m/s and inlet concentration $3g/m^3$(fly ash).

• 한국전자통신학회논문지
• /
• 제7권2호
• /
• pp.221-226
• /
• 2012

본 논문에서는 광대역 (400 MHz~2000 MHz) 2단 증폭단을 설계, 제작 및 측정하였다. 제안한 증폭단은 새로운 구조의 이득제어 방식을 적용하여 고이득, 저잡음지수 및 높은 선형성 특성을 구현하였다. 증폭단은 공통 에미터 구조의 초단 증폭기 및 캐스코드 구조의 가변이득 증폭기. 입력신호의 크기를 감지하는 전력감지회로로 구성하였다. 제안한 증폭단은 설계 대역에서 전체이득 29 dB~37 dB, 잡음지수 1.5 dB을 나타내었고, 강전계 입력 조건에서 전력감지회로에서 발생되는 제어전압 2.0V인 조건에서 3차 상호변조 왜곡 신호의 크기는 측정 장비의 잡음레벨 보다 낮은 특성을 나타내어 높은 선형성 특성을 나타내었다.

• Journal of Ecology and Environment
• /
• 제33권2호
• /
• pp.149-155
• /
• 2010

This study was conducted to investigate the feeding efficiency of the cattle egret (Bubulcus ibis) and the intermediate egret (Ardea intermedia) in relation to the stage of rice culture during two breeding seasons, 2006 and 2007, in Asan city, Chungcheongnam-do, South Korea. Cattle egrets caught mainly small invertebrate prey (insects and spiders, 98.4%) during all stages of rice cultivation, and had a higher prey capture rate in the plowing stage (14.98 prey/min) than in other stages (2.82-3.51 prey/min). Therefore, the biomass intake rate of cattle egrets was highest in the plowing stage. The intermediate egret captured both loaches (43.4%) and small invertebrates (50.6%). The prey capture rates of intermediate egrets increased gradually from the flooding stage (0.38 prey/min) to the planting stage (1.09 prey/min), and decreased in the growing stage (1.04 prey/min). However, intermediate egrets had the highest biomass intake rates in the plowing stage because more loaches were caught in the plowing stage (0.54 loaches/min) than other stages (0.23-0.36 loaches/min). Consequently, both intermediate egrets and cattle egrets had high energy intakes in the plowing stage and rice fields provided an important feeding habitat for both species.

• 한국환경과학회지
• /
• 제29권9호
• /
• pp.907-914
• /
• 2020

In this study, the two-stage electroflotation-rising process was investigated with the aim of improving the performance of the conventional one-stage electroflotation process. A total of 32 min (the electroflotation and rising times were 30 min and 2 min, respectively,) was required when a current of 0.35 A was applied in the one-stage electroflotation-rising experiment. The amount of electric power required to treat 1 ㎥ of water was 1.75 kWh/㎥. For the two- stage system, the time required to achieve a turbidity removal rate of over 95% was 16 min (50% of the one-stage system). The amount of electric power required to treat 1 ㎥ of water was 0.59 kWh/㎥, which was only 33.7% of that required for the one-stage process. The total treatment time and electric power were excellent in case of the two-stage system in comparison with those of the one-stage process. The rate of turbidity removal for the horizontal electrode arrangement is 9.3% higher than that of vertical electrode arrangement. When Na₂SO₄ was used as the electrolyte, the optimum electrolyte concentration was 1.0 g/L.

• 대한골관절종양학회지
• /
• 제9권2호
• /
• pp.131-138
• /
• 2003

서론: 악성 말초 신경막 종양(Malignant peripheral nerve sheath tumor, MPNST)에 대하여 수술, 항암제 투여, 방사선 치료 등을 시행하고 이에 따른 종양학적 결과를 분석하여 보다 합리적인 치료 방법을 알아보고자 하였다. 재료 및 방법: 1986년 2월부터 1996년 11월까지 본원에 등록된 MPNST 환자 34례를 대상으로 하였다. 남자가 17례, 여자가 17례였고 평균연령은 41세(18세~74세)였다. 종양의 위치는 하지가 17례, 상지 11례, 체간부 4례, 후복막 2례였다. AJC(American Joint Committee on Cancer) 분류에 의한 종양의 병기는 stage IA가 2례, stage IIA 2례, stage IIB 6례, stage III 16례, 그리고 stage IV가 8례였다. 치료 방법으로는 26례에서 수술과 항암제 투여 그리고 때에 따라서 방사선치료를 시행하였고 3례에서는 수술만, 3례에서는 항암제 투여나 방사선 치료만 시행하였다. 평균 추시 기간은 33.5개월(5.6개월~141.1개월)이었다. Kaplan-Meiyer 법으로 생존율을 구하였고, log rank test로 비교 분석 하였다. 결과: 최종 추시상 질병 상태는 14례에서 CDF(continuous disease free)였고, 2례가 NED(no evidence of disease), 2례 AWD(alive with disease), 그리고 14례가 DOD(died of disease)였다. 실제(actuarial) 5년 생존율과 10년 생존율 은 53.5 %와, 35.7%였다. 수술 후의 국소 재발율은 24.1%였다. 병기별 5년 실질 생존율은 stage I이 100%, stage II 85.7%, stage III 55.9%였고 stage IV의 경우 2년 실질 생존율이 14.3%였다(p=0.04). Stage II, III에서 수술한 경우 21례에서, 광범위 이상의 절제연을 얻었던 경우가 15례로 5년 실질생존율이 76.0%였고 병소내이거나 변연부 절제연의 경우는 6례로 40.0%였다(p=0.26). 4회차 이상의 항암화학요법제를 투여한 군(8례)의 5년 실질생존율은 71.4%였고 3회차 이하의 불충분한 항암제투여를 시행한 군(6례)의 3년 실질생존율은 83.3%였다(p=0.96). Stage II, III 중 방사선 치료 없이 수술 받은 19례에서 병소내 절제나 변연부 절제를 시행했던 5례는 3례가 국소 재발하였고(60.0%) 광범위 절제를 시행한 14례는 4례가 국소 재발하였다(28.6%). 수술 전 또는 후에 방사선치료를 시행하였던 8례에서는 국소재발이한 예도 없었다. 결론: 외과적 절제연(surgical margin)이 국소 재발에는 중요한 요인이었고, 통계적으로 의미있는 수치는 아니었지만 생존율에도 영향을 주는 경향이 있는 것으로 생각된다. 기존의 항암제 투여는 국소 재발이나 생존율상에 통계적으로 의미있는 차이를 보이지 못하였다. 수술전과 수술후 시행하였던 방사선치료는 국소 재발을 줄이는데 어느 정도의 효과를 보였다.

• 항공우주기술
• /
• 제7권2호
• /
• pp.151-156
• /
• 2008

1차원 설계에서 설계된 2단형 터보펌프 터빈에 대한 유동해석을 수행하고 결과를 비교 분석하였다. 1단 동익에 대한 계산결과로부터 가장 우수한 1단 익형을 선정한 후 정익의 입 출구 높이 변화에 따른 터빈의 성능변화를 고찰하였다. 2단 전체에 대한 계산을 수행하고 같은 출력의 단단형 터빈에 비해 높은 비출력을 갖는 터빈의 설계가 가능함을 확인하였다.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.202-207
• /
• 2012

Multi-stage deploying beams are useful for transporting parts or products handling in production lines. However, such multi-stage beams are often exposed to unwanted vibration due to the presence of their flexibility and time-varying properties. This paper is concerned with dynamic modeling and analysis of 2-stage axially deploying beams under gravity by using the finite element method. A variable domain finite element method is employed to develop the dynamic model. A rigorous method to account for engagement of two-stage beams during the deploying procedure is introduced by breaking the entire domain into three variable domains. Several deploying strategies are tested to analyze the residual vibrations. Several examples are illustrated to investigate the self-induced damping and the effects of deploying strategy on the vibrations.

• 소성∙가공
• /
• 제29권2호
• /
• pp.97-102
• /
• 2020

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through multi-stage drawing dies. The aim of this study is to fabricate a drawing wire using 2 stage drawing process. The finite element analysis of wire drawing was conducted to validate the efficiency of the designed process and the experiment was performed to validate the designed wire drawing process using 2 stage tungsten carbide die. Dry lubricant with powder was applied for producing a wire of desired diameter. Finally, a drawing wire using 2 stage die for cold rolling mill was developed.