This study was suggested to develop sustainable durability design system and proposed the plan to evaluate design conditions that meet the intended service life and $LCCO_{2}$ reduction level of reinforced concrete structure easily from the early design stage. For that the W/B and covering depth of the concrete structure were calculated through calculation of service life based on standard specification expression and the quantitative reduction rate of the vertical member of reinforced concrete structure by the calculated W/B was applied. Life cycle of building classified into construction stage, operation stage, maintenance stage, and demolition/disposal stage and the method of $CO_{2}$ evaluation of each stage was proposed. For construction stage, the major construction materials that take up over 80% $CO_{2}$ emitting during building construction were selected and the $CO_{2}$ evaluation method for 5 standard apartment houses was proposed. Also, for operation stage, $CO_{2}$ emission was calculated through calculation of heating load by energy efficiency rating certification system. For maintenance stage, $CO_{2}$ emission was calculated using concept of re-construction by life and for demolition/disposal stage was calculated with the use of construction standard estimate. As a result of the case study by such evaluation methods, 80 years of service life and 17 specifications of sustainable durability design that meet the 40% intended $LCCO_{2}$ reduction level were deduced. The Maximum $LCCO_{2}$ reduction rate was analyzed by 47.2%.
The Sangra Pb-Zn deposit is located in the Gampo area. Most Cretaceous sedimentary rocks and Paleogene felsic intrusives in the study area have experienced intense propylitization. Such propylitization and Pb-Zn mineralization in ore veins are involved with the fluid having very low oxygen isotopic composition.Sulfurisotopic equilibrium temperature during the main Pb-Zn mineralization (late stage I) is calculated as $T=275^{\circ}{\sim}295^{\circ}C$. Oxygen and sulfur fugacity in late stage I fluid is estimated as $logfO_2=-34.4{\sim}-29.1$ and $logfS_2=-12.0{\sim}-8.2$ bars. It is inferred that the sulfur isotopic composition oflate stage I fluid was very high such as ${\delta}^{34}S_{{\Sigma}S}=+22.4{\sim}+22.5$‰ and the origin of sulfur was ocean water sulfate. Oxygen and hydrogen isotopic composition of water in ore-forming fluid was gradually increased and more abundantly affected by ocean water from early to late mineralization stage as follows; (late stage I) ${\delta}^{18}O_{H2O}=-7.2{\sim}-1.1$‰, ${\delta}D_{H2O}=-87{\sim}-84$‰, (stage II) ${\delta}^{18}O_{H2O}=-2.4{\sim}-0.8$‰, ${\delta}D_{H2O}=-39{\sim}-21$‰ (stage III) ${\delta}^{18}O_{H2O}=+0.7{\sim}+12.6$‰, ${\delta}D_{H_2O}=-49{\sim}-42$‰. The pH in ore-forming fluid was about 4.7 during late stage I and is thought to have been gradually decreased from late stage I to stage II mineralization.
Journal of the Institute of Electronics Engineers of Korea SD
/
v.45
no.2
/
pp.44-48
/
2008
According to increment of stage, the speed of changeable stage Carry-increment adder can be close to $O(\sqrt{2n})$ because the word length which is computed in stage can be lengthened by 1 bit. But the number of stage bits is increased, fan-out of carry which is inputted in stage is increased. So tile speed can be slow. This paper presents a new carry-increment adder design method to fix the number of fan-outs regardless of the number of stages. By layout simulation of 37-bit adder, the area can be Increased up to 40%, but speed improvement up to 75% can be achieved, by the proposed method, compared with a conventional method.
Demi-embryos were successfully produced by bisection of ICR mouse embryos at preimplantation stages. They were microsurgically bisected using a microsurgical blade attached to a micromanipulator after pretreatment with 0.5% pronase in PBS for two minutes or not. Embryos with softened zona pellucida were more easily bisected and less damaged than intact embryos. The highest success rate in bisection has been achieved by selecting blastocysts(94.1% in success rate with intact blastocysts and 100% in success rate with zona softened blastocysts). Demi-embryos without zona pellucida were cultured in D-PBS or M-16 medium at $37^{\circ}C$, 5% $CO_2$ in air for 72 hours for 2-cell stage embryos, 48 hours for 4-to 8-cell stage embryos, 24 hours for morula stage embryos and 6~12 hours for blastocyst stage embryos. For the in vitro culture of 2-cell stage embryos, $100{\mu}M$ 2Na-EDTA was added to the media. M-16 medium was better for the in vitro development of mouse embryos than PBS, and PBS is not considered to be suitable for long-term culture of embryos, especially at early stage of cleavage. In M-16 medium, developing rate of demi-embryos of which pair underwent development to form eublastocysts was 15.8% at 2-cell stage, 16.8% at 4-cell stage, 38% at 8-cell stage, 89.6% at morula stage and 94.4% at blastocyst stage, respectively. The more rapid and efficient production of demi-embryos and higher viability after bisection can be expected by softening zona pellucida with pronase and by selecting morulae or blastocysts rather than embryos at early stage of cleavage.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.8
no.4
/
pp.660-666
/
1998
We discussed structure, energy state, characteristics of thermal stability, and electrochemical properties of Li-GFICs, Li-PCICs, and Li-AGICs during the intercalation process. According to X-ray diffraction patterns, we observed phase of stage 2 mainly from Li-GFICs, while stage 1 phase as well as stage 2 from Li-PCICs. For the structure of Li-AGICs, stage 1 phase was dominant, but it was not possible to obtain pure stage 1 compound probably due to structural characteristics of artificial graphite. We measured energy state of the compounds to stage stability, and revealed that Li-AGICs and Li-GFICs were in more stable state than Li-PCICs. Therefore, those two compounds could be excellent candidate for energy reserve material. From the study of thermal degradation, Li-GFICs showed strong exothermic reaction at around 300 and $400^{\circ}C$. In the study of thermal stability of Li-AGIC at various temperatures, we observed that lithium was not completely deintercalated and high stage was maintained even at high temperature. In the case of charge, discharge, and electrochemical studies, Li-GFICs showed the best results.
The purpose of this research was to investigate the permeation properties of each stage in three stage reverse osmosis system for cold-mill wastewater reuse. After construction of the three staged pilot plant which had 75% recovery and equipped with seven plate-and-frame modules, the change of each stage's penneate flow and quality were investigated in the process of membrane fouling. The order of average permeate flow was first, second, and third stage at the beginning. As the operation time passed, the permeate flow of first stage was decreased, the second stage was maintained steadily, and the third stage was increased. Accordingly, the fouling was initiated at the first stage and then progressed to the second and third stage. The first stage's permeate quality showed the best and the second and third stage was the next in that order. And the order of quality was maintained during the test periods. Therefore, the permeate quality was not affected by membrane fouling.
Purpose: This study was designed to identify the factors affecting healing of Stage 2 pressure ulcer in an acute care facility in Korea. Methods: 286 Stage 2 pressure ulcers of 145 patients were examined. Data were collected in the period between October $1^{st}$, 2006 and September $30^{th}$, 2007. Data were analyzed with Kaplan-Meier survival analysis for cumulative recovery rate of Stage 2 pressure ulcers. Cox proportional hazard model was used to examine effects of multiple variables simultaneously. Results: Out of 286 initial Stage 2 pressure ulcers, 204 (71.3%) pressure ulcers healed completely. The median time to heal was 15 days according to Kaplan-Meier survival analysis. Cox proportional hazard model showed that the Stage 2 pressure ulcers healed more quickly when pressure redistribution surfaces were used (p<.001, HR=2.184), patients were administered with vitamins (p= .038, HR=1.451), and the size of the pressure ulcers were small (${\leq}3.0cm^2$, p= .006, HR=1.765). Conclusion: The factors contributing to the healing of Stage 2 pressure ulcer in an acute care setting were the application of pressure redistribution surface, small ulcer size (${\leq}3.0cm^2$), and the administration of vitamins.
In this paper, alternative natural refrigerant R290(Propane), R600(Butane), R717(Ammonia), R1270(Propylene) for freon refrigerant R22 were used working fluids for 2-stage compression and 1-stage expansion refrigeration system. The operating parameters considered in this study included evaporation temperature, condensation temperature, subcooling degree, superheating degree, mass flow rate ratio of inter-cooler. The main results were summarized as follows : The COP of 2-stage compression and 1-stage expansion refrigeration system increases with the increasing subcooling degree and mass flow rate ration of inter-cooler, but decreases with the increasing evaporating temperature, condensing temperature and superheating degree. Therefore, subcooling degree, mass flow rate ratio of inter-cooler of 2-stage compression and 1-stage expansion refrigeration system using natural refrigerants have an effect on COP of this system. The COP of natural refrigerants was higher than the COP of freon R22 in this study, so points to be considered are the security, the attached facilities for natural refrigerants than COP.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.3
no.2
/
pp.167-175
/
1993
Lithium-Carbon Intercalation Compounds(Li-CICs) have been synthesized from various carbon ma-terials by use of the modified stainless steel two-bulbs methods. These compounds had various colours by structural character of starting materials. The synthesized Li-CICs were identified to stage formation process by X-ray diffraction data. At these results, well-oriented natural graphite and graphite fiber are formed lower stages(Stage 1, Stage 2), but poor-oriented carbon fiber and petroleum cokes are also formed higher stages(Stage 3, Stage 4, Stage 5). And when we compared with measured d value and calculated d value, these values agreed with each other. But poor-oriented carbon materials are some difference from them. The stage stability and energy stage of Li-CICs were obtained by UV/VIS Spectrophotometric data. X-ray diffraction and UV/VIS Spectrophotometric data suggested that well-oriented carbon materials has distingushible curve between energy and reflectance. In these results, we know that many charge carriers between carbon layers are related to concentration of intercalants. And then, this paper also provides information on high efficiency energy storing materials at intercalation process of Li-CICs.
Li Shan Ji;Paik Hee Young;Hong Kyungeui;Joung Hyojee
Journal of Nutrition and Health
/
v.37
no.7
/
pp.566-575
/
2004
To compare the dietary intakes and body composition in the stage of puberty, this study was conducted with 360 girls aged 9 to 12 years in Seoul Korea. Girls's general information and 3-day diet records were collected, fat mass was measured by Inbody 3.0, bone mass at right calcaneus was measured by PIXI and pubertal development was self-assessed by picture of Tanner stages. The results are as follows: Girls who had breast development were 79.7% and 15.8% had pubic hair development. Mean of BMI, BMC and BMD were significantly higher at breast stage3+(19.6 kg/$m^2$, 1.62 kg, 0.47 g/$\textrm{cm}^2$) than at the breast stage2 (18.2 kg/$m^2$, 1.47 kg, 0.44 g/$\textrm{cm}^2$) or breast stage1(16.3 kg/$m^2$, 1.32 kg, 0.39 g/$\textrm{cm}^2$) (p < 0.001). Percent body fat of breast stage1, 2, and 3+ were 19.7%, 23.1%, 25.3% respectively and significantly increased during the puberty (p < 0.001). The mean of energy intake was 1629 kcal in stage1, 1664 kcal in stage2 and 1577 kcal in stage3+ showed significant difference in the breast stages (p < 0.05). Energy adjusted sodium intakes and crude fiber intakes were significantly higher in breast stage3 + than other breast stages. For zinc and iron, proportions of subjects with intake levels less than 75% of Korean RDA was over 40% and significantly higher in breast stage3+ than other stages (p < 0.05) ; for protein and vitamin E, the proportions of subjects with intake levels more than 125% RDA was significantly higher in the stage 1. The nutrient adequacy ratio (NAR) for protein and phosphorous was significantly lower in breast stage3+ than other stages. The food groups of seed and nut were 4.7 g/day, 2.3 g/day, 1.8 g/day, respectively, and was significantly higher in breast stage 1. In summary, mean of BMI, BMD, BMC and percent of body fat were increased with pubertal development, and those who had higher breast developmental stage showed a lower amount of consumption level in energy, seeds and nuts, and also showed a higher amount of consumption level in energy adjusted sodium and fiber among Korean girls.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.