• The KSFM Journal of Fluid Machinery
• /
• v.14 no.3
• /
• pp.10-17
• /
• 2011

Free energy based lattice Boltzmann method (LBM) has been used to simulate the contact angle and the bubble necking with large density ratio. LBM with the proper contact angle model is able to reduce the spurious currents and eliminate the singularity in the contact lines. The numerical results of the contact angles are satisfied with the Youngs law. For bubble necking flows, simulations are executed for various viscosities and contact angles. The phenomena of the bubble necking are simulated successfully and the subsequent results are presented. The present method is also applicable to the nucleate boiling flows.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.2
• /
• pp.119-126
• /
• 2010

An integrated magnetic (IM) transformer is proposed for a phase shifted full bridge (PSFB) converter with zero voltage switching (ZVS). In a proposed IM transformer, the transformer is located on the center leg of E-core and the output inductor is wound on two outer legs with air gap. The proposed IM transformer is analyzed by using the magnetic capacitor model. For reducing the core size, EE core is redesigned. The proposed IM transformer is experimentally verified on a 1.2 kW prototype converter. The converter efficiency with the proposed IM transformer is about 93 % at full load and its volume size can be reduced. It can be expected that the power density can be largely increased with the proposed IM transformer.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.395-401
• /
• 1997

The substituent effects in the gas-phase rearrangement of carbenes to ketenes involved in the Wolff reaction have been investigated theoretically using the AM1 method. In the initial state, carbene, there is a relatively strong vicinal n-σ* interaction between the lone pair (n) and carbonyl group (σ*). In the bridged transition state (TS), electronic charge is transferred from the migrating ring (Z-ring) toward the nonmigrating ring (Y-ring). The carbenes are stabilized by an electron donor Y (δσY < 0) whereas the TS is stabilized by an electron acceptor Y (δσY > 0). Multiple regression analysis of log (kYZ/kHH)(=-δΔG≠/2.3RT) leads to a relatively large negative cross-interaction constant, ρYZ=-0.53, log (kYZ/kHH)=2.96 σY--1.40 σZ-0.53 σY-σZ reflecting an extensive structural change in the transition state due to the stabilization of the initial state by the vicinal n-σ* overlap. When the solvent (water) effects are accounted for by the SM2.1 model of the Cramer and Truhlar method, the magnitude of all the selectivity parameters, ρY-, ρZ and ρYZ (=-0.66) are increased.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.20-24
• /
• 2011

In this paper, numerical simulation of cavitation flow for modified NACA66 hydrofoil was made by using the multi-phase RANS equation based on pseudo-compressibility. The Homogeneous mixture model comprised of the mixture continuity, mixture momentum and liquid volume fraction equations was utilized. A vertex-centered finite-volume method was used in conjunction 2nd-order Roe's FDS to discretize the inviscid fluxes. The viscous fluxes were computed based on central differencing The Spalart-Allmaras one equation model was employed for the closure of turbulence. Reasonable agreements were obtained between the calculation results and the experiment for pressure coefficients on the hydrofoil surface.

• International Commerce and Information Review
• /
• v.7 no.4
• /
• pp.23-36
• /
• 2005

With the rapid development of the Internet, e-business has been entering a new phase. However, there're still some problems to be settled and needs for breakthrough. The paper proposes an innovative approach to e-business models with the aim to resolve the problems. The paper reviews the exiting e-commerce models and points out some of the common weaknesses of the models, and presents the "Business Blogging e-Hub"model for e-business. With the characteristics of all-sided information, multi-dimensional interactivity and trans-model e-commerce platform, the proposed model is created and derived from the integration of the "classical"e-commerce models as B2B, B2C and C2C with the technology and essence of blogging, and is thus sure to meet rapidly changing business needs.

• Interaction and multiscale mechanics
• /
• v.2 no.3
• /
• pp.321-332
• /
• 2009

Recent development in composites containing phase-transforming particles, such as vanadium dioxide or barium titanate, reveals the overall stiffness and viscoelastic damping of the composites may be unbounded (Lakes et al. 2001, Jaglinski et al. 2007). Negative stiffness is induced from phase transformation predicted by the Landau phase transformation theory. Although this unbounded phenomenon is theoretically supported with the composite homogenization theory, detailed stress analyses of the composites are still lacking. In this work, we analyze the stress distribution of the Hashin-Shtrikman (HS) composite and its two-dimensional variant, namely a circular inclusion in a square plate, under the assumption that the Young's modulus of the inclusion is negative. Assumption of negative stiffness is a priori in the present analysis. For stress analysis, a closed form solution for the HS model and finite element solutions for the 2D composite are presented. A static loading condition is adopted to estimate the effective modulus of the composites by the ratio of stress to average strain on the loading edges. It is found that the interfacial stresses between the circular inclusion and matrix increase dramatically when the negative stiffness is so tuned that overall stiffness is unbounded. Furthermore, it is found that stress distributions in the inclusion are not uniform, contrary to Eshelby's theorem, which states, for two-phase, infinite composites, the inclusion's stress distribution is uniform when the shape of the inclusion has higher symmetry than an ellipse. The stability of the composites is discussed from the viewpoint of deterioration of perfect interface conditions due to excessive interfacial stresses.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2388-2398
• /
• 2017

In this study, we propose a robust face recognition system to pose variations based on automatic pose estimation. Radial basis function neural network is applied as one of the functional components of the overall face recognition system. The proposed system consists of preprocessing and recognition modules to provide a solution to pose variation and high-dimensional pattern recognition problems. In the preprocessing part, principal component analysis (PCA) and 2-dimensional 2-directional PCA ($(2D)^2$ PCA) are applied. These functional modules are useful in reducing dimensionality of the feature space. The proposed RBFNNs architecture consists of three functional modules such as condition, conclusion and inference phase realized in terms of fuzzy "if-then" rules. In the condition phase of fuzzy rules, the input space is partitioned with the use of fuzzy clustering realized by the Fuzzy C-Means (FCM) algorithm. In conclusion phase of rules, the connections (weights) are realized through four types of polynomials such as constant, linear, quadratic and modified quadratic. The coefficients of the RBFNNs model are obtained by fuzzy inference method constituting the inference phase of fuzzy rules. The essential design parameters (such as the number of nodes, and fuzzification coefficient) of the networks are optimized with the aid of Particle Swarm Optimization (PSO). Experimental results completed on standard face database -Honda/UCSD, Cambridge Head pose, and IC&CI databases demonstrate the effectiveness and efficiency of face recognition system compared with other studies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.757-764
• /
• 2018

This paper describes the design and implementation of a 1hp class two-phase type BLDC fan motor used in an air conditioning system. The BLDC motor, which is implemented in this study, is not a commutator motor type with excellent lifetime and durability and is driven by two phase power source. The most important target specification of a motor used in an air conditioning system is that it has a high efficiency at the rated operating point. For this purpose, we designed the stator shape of the BLDC motor, the design of the rotor magnet, and the control circuit for driving. The BLDC motor has a structure where the motor part, the control part, and the power part are integrated. The finite element analysis was used to calculate the characteristics of the BLDC motors, and the conformity of the design results was confirmed by fabricating and testing the prototype model.

• Journal of ILASS-Korea
• /
• v.17 no.2
• /
• pp.64-70
• /
• 2012

Water mist fire suppression systems which use relatively small droplets of water with high injection pressure are increasingly being used in wider applications because of its greater efficiency, low flooding damage and low toxicity. However, the performance of the system significantly relies on the water mist characteristics and it requires better understanding of fire suppression mechanism of water mist. In the present study, computational fluid dynamics simulations were carried out to investigate cooling performance of water mist in heated chamber. The gas phase was prepared with natural convection heat transfer model for incompressible ideal case and then the effects of water mist injection characteristics on cooling capabilities were investigated upon the basis of the pre-determined temperature field. For the simulation of water mist behavior, Lagrangian discrete phase model was employed by using a commercial code, FLUENT. Smaller droplet sizes, greater injection angles and higher flow rates provided relatively higher cooling performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.782-790
• /
• 1999

In this paper, we propose an adaptive trellis-coded Multiple Quadrature Amplitude Modulation(ATCMQAM) applying MQAM as the modulation scheme in the conventional ATCMPSK (Adaptive trellis-Coded Multiple Phase Shift Keying) for slowly varying Rayleigh fading channels. The proposed system adaptively controls the coding rate combined with modulation level of pragmatic approach to trellis-coded modulation according to the instantaneous fading channel conditions, and employs MQAM as modulation scheme.Results by computer simulation show that the proposed adaptive model using MQAM can realize higher quality transmission with the improvement more than 0.5 ~ 1bit in average bit rate. And there is a coding gain of 2-5dB, depending on the high SNR value, compared with the conventional adaptive model employing MPSK.