• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.506-512
• /
• 2006

In this paper, we propose a lot-sizing and scheduling problem that seeks to minimize the sum of production cost and inventory cost over a given planning horizon while considering idle state of a machine in a batch production system. For this problem, we develop an integer programming model. And, we develop an efficient 2-phase heuristic algorithm to find a high quality feasible solution within reasonable time bounds. In the first phase, we seek to minimize the production cost by assigning batches to machines. Then, in the second phase, we find a production sequence of batches that reduces the inventory cost, while considering adding or deleting idle states between batches. Computational results show that the developed heuristic algorithm finds excellent feasible solutions within reasonable time bounds. Also, we could significantly reduce the total cost consisting of production cost and inventory cost by using the developed heuristic algorithm at a real manufacturing system that produces zinc alloys.

• Nuclear Engineering and Technology
• /
• v.41 no.7
• /
• pp.885-892
• /
• 2009

This manuscript will discuss a numerical method where the six equations of two-phase flow, the solid heat conduction equations, and the two equations that describe neutron diffusion and precursor concentration are solved together in a tightly coupled, nonlinear fashion for a simplified model of a nuclear reactor core. This approach has two important advantages. The first advantage is a higher level of accuracy. Because the equations are solved together in a single nonlinear system, the solution is more accurate than the traditional "operator split" approach where the two-phase flow equations are solved first, the heat conduction is solved second and the neutron diffusion is solved third, limiting the temporal accuracy to $1^{st}$ order because the nonlinear coupling between the physics is handled explicitly. The second advantage of the method described in this manuscript is that the time step control in the fully implicit system can be based on the timescale of the solution rather than a stability-based time step restriction like the material Courant limit required of operator-split methods. In this work, a pilot code was used which employs this tightly coupled, fully implicit method to simulate a reactor core. Results are presented from a simulated control rod movement which show $2^{nd}$ order accuracy in time. Also described in this paper is a simulated rod ejection demonstrating how the fastest timescale of the problem can change between the state variables of neutronics, conduction and two-phase flow during the course of a transient.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.1-9
• /
• 2010

LES(Large eddy simulation) of breakup and droplet atomization of a liquid jet into cross turbulent flow was performed. Two phase flow of gas and liquid phases were modeled by the mixed numerical scheme of both Eulerian and Lagrangian methods for gas and liquid droplet respectively. The breakup process of a liquid column and droplets was observed by implementing the blob-KH wave breakup model. The penetration depth into cross flow was comparable with experimental data for several variants of the liquid-gas momentum flux ratio by varying liquid injection velocity. SMD(Sauter Mean Diameter) distribution downstream of jet was analyzed.

• The Journal of Engineering Research
• /
• v.6 no.2
• /
• pp.85-98
• /
• 2004

The adsorption equilibrium data for the binary gas mixture system from the pure gas adsorption data of carbon dioxide and ethylene on ZSM-5 prepared were predicted. The binary gas mixture adsorption data have been examined against predicted values by two models-the vacancy solution model(VSM) and the statistical thermodynamic model(STM), using parameters obtained from the single component isotherm. The binary gas mixture data for the carbon dioxide-ethylene system were obtained for cation exchanged forms of ZSM-5 for the gas phase carbon dioxide mole fraction of 0.752 at $37^{\circ}C$ and 1 atm. The experimental adsorption phase diagrams were obtained for carbon dioxide-ethylene on sodium form ZSM-5 synthesized. The single component adsorption isotherms for carbon dioxide and ethylene were also obtained for this zeolite. The single component data were used to obtain parameters derived in two models. These parameters were, in turn, used to predict the binary mixture isotherms for this zeolite. Both the vacancy solution and the statistical thermodynamic models give satisfactory predictions of adsorption phase diagrams for the binary gas mixtures of carbon dioxide and ethylene on sodium exchanged ZSM-5. Also the correlation between the experimental data and the predicted values is generally in good agreement. The system appears to show ideal behavior with a relatively constant separation factor. The slight increase in adsorption capacity with an increase in ionic radius is due, in part, to the higher polarizability associated with larger cations.

• Journal of Korean Academy of Oral Health
• /
• v.42 no.4
• /
• pp.109-117
• /
• 2018

Objectives: The purpose of this study was to evaluate the customized oral health promotion program for North Korean defectors (NKDs). Methods: Using a pre-survey comprising phases 1-5 of the PRECEDE-PROCEED model, a customized oral health promotion program was created. The participants, a total of 129 NKDs, were allocated to the experimental group (n=64; 43 females and 21 males) or the control group (n=65; 46 females and 19 males). After the interventions, phases 7 to 9 of the PRECEDE-PROCEED model were executed to determine the effect of the program. Results: The results for phase 7 revealed high satisfaction with the program, with an average of 2.89 out of 3 points. In phase 8, concerning the impact evaluation, it was found that oral health beliefs and oral health knowledge were improved, with statistically significance differences before and after the experiment. Phase 9, concerning the outcome evaluation, showed that there were statistically significant differences in the average within groups before and after education in oral health beliefs (OHB), O'Leary index scores, and CPI. In terms of the difference between the groups, there were statistically significant improvement in OHB, O'Leary index scores, and CPI after the education program. Conclusions: The oral health promotion program developed in this study has made a positive contribution to improve the oral health status of NKDs.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.730-731
• /
• 2015

This study aims at giving the framework to estimate the environmental load at planning and schematic phase. With increasing awareness of environmental issues, the effort to reduce the environmental impacts caused by human activity has been increasingly enlarged. So far most of researches estimating CO₂ emissions have analyzed energy consumption based on BOQ (Bills of Quantity) acquired after detailed design. There is also lack of reliability in the estimated environmental impact using the basic unit of a facility at the planning stage, because it uses a limited specific section of historical data. Thus, this study is targeted at developing framework to assess reliable environmental loads based on information available at project early phases by making case-bases from historical design information on PSC Beam Bridge. Historical database is built on the basis of the LCA (Life Cycle Assessment) and in order to set input information for estimating model, the literature about information in an early project phase are reviewed. Using the information available in the planning and schematic design stage, the Framework is presented to estimate the environmental load in an early stage in the project. Developing an environmental load estimation model in accordance with the Framework presented in this study, it is expected that the environmental load in the initial project phase can be estimated more quickly and accurately.

• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.258-267
• /
• 1993

A mathematical model has been developed to describe heat transfer phenomena in a PCM (phase change material) module for development of an energy recovery system. The PCM module, melting point of which is around 1673 K, consists of silicon(96.8%), aluminium(2.7%) and marginal amounts of impurities such as Ca, Fe and Ti. The module is covered by a capsule that consists of SiC(58%) and graphite(42%). Physical properties that are required for model predictions were cited from the references. The apparent capacity method and the postiterative method wert used in the mathematical model to describe the phase changing mechanism. Temperature and velocity of fluid are the major variables in the model calculation. For the gas temperature of 1773 K that simulates real operating conditions, the prediction shows that PCM is rapidly melted to axial direction. However, for the gas temperature of 3000 K that is higher than the real conditions, PCM is melted rapidly to the radial direction. The gas velocity has no influence on the melting phenomena of the PCM except when the gas velocity is relatively low. At the low gas velocity asymmetry of the temperature profiles in PCM is obtained.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.11
• /
• pp.4571-4576
• /
• 2015

Background: To investigate the inhibitory effect and the underlying mechanism of triptolide on cultured human endometrial carcinoma HEC-1B cells and corresponding xenograft. Materials and Methods: For in vitro studies, the inhibition effect of proliferation on HEC-1B cell by triptolide was determined by MTT assay; cell cycle and apoptosis of the triptolide-treated and untreated cells were detected by flow cytometry. For in vivo studies, a xenograft tumor model of human endometrial carcinoma was established using HEC-1B cells, then the tumor-bearing mice were treated with high, medium, and low-dose ($8{\mu}g$, $4{\mu}g$ and $2{\mu}g/day$) triptolide or cisplatin at $40{\mu}g/day$ or normal saline as control. The mice were treated for 10-15 days, during which body weight of the mice and volume of the xenograft were weighted. Then expression of Bcl-2 and vascular endothelial growth factor (VEGF) was analyzed by SABC immunohistochemistry. Results: Cell growth was significantly inhibited by triptolide as observed by an inverted phase contrast microscope; the results of MTT assay indicated that triptolide inhibits HEC-1B cell proliferation in a dose and time-dependent manner; flow cytometry showed that low concentration (5 ng/ml) of triptolide induces cell cycle arrest of HEC-1B cells mainly at S phase, while higher concentration (40 or 80 ng/ml) induced cell cycle arrest of HEC-1B cells mainly at G2/M phase, and apoptosis of the cells was also induced. High-dose triptolide showed a similar tumor-inhibitory effect as cisplatin (-50%); high-dose triptolide significantly inhibited Bcl-2 and VEGF expression in the xenograft model compared to normal saline control (P<0.05). Conclusions: triptolide inhibits HEC-1B cell growth both in vitro and in mouse xenograft model. Cell cycle of the tumor cells was arrested at S and G2/M phase, and the mechanism may involve induction of tumor cell apoptosis and inhibition of tumor angiogenesis.

• 한국체육학회지인문사회과학편
• /
• v.55 no.2
• /
• pp.47-67
• /
• 2016

The purpose of this study was to understand barriers and problems associated with physical activity of older adults in a small town and to provide improvement plans based on socio-ecological model. This study employed three independent phases including survey, accelerometer study, and photovoice. Three phases were analyzed based on nesting design among diverse mixed method designs. Among 134 older participants, 73 older individuals reported that their physical activity per week was less than 150min in the first phase. Among the 73 older individuals, 40 older individuals participated in the second phase. In the second phase, 32 older individuals does not meet at least 150min of moderate-to-vigorous physical activity(MVPA) suggested by DHHS. Finally, 6 older adults participated in the third phase. Five major themes emerged including 1) lack of proper information and service regarding physical activity, 2)lack of support from people close to them, 3)some limits due to chronic disease, 4)lack of appropriate facility, and 5)lack of opportunity due to existing inactive lifestyle. Based on these five themes, this study attempted to provide the improvement plans with socio-ecological model.

• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.113-119
• /
• 2015

This paper suggests an efficient method for making the high resolution volexlized model from a polygonal surface object. A distinctive strength of the method is that a surface model, however complex one, can be transformed and formed an absolute voxelized solid model in a various resolution. It caused by producing a voxel by integrating the informations for the candidated voxels separately detected in each 3D-axial direction. This method reduces memory complexity by storing the information of voxels that is produced during the 2-phase volxelization(surface and inner voxelization) of a surface object in a binary file. For the computational efficiency, a parallel process using multi-threads is applied in the process of the inner voxelization, it also takes advantage of time complexity.