• Transactions of Materials Processing
• /
• v.13 no.2
• /
• pp.160-167
• /
• 2004

In order to theoretically analyze the creep behavior of high Cr steel at $600^{\circ}C$, a unified elasto-viscoplastic constitutive model based on the consideration of dislocation density is proposed. A combination of a kinetic equation describing the mechanical response of a material at a given microstructure in terms of dislocation glide and evolution equations for internal variables characterizing the microstructure provides the constitutive equations of the model. Microstructural features of the material such as the grain size and spacing between second phase particles are directly implemented in the constitutive equations. The internal variables are associated with the total dislocation density in a simple model. The model has a modular structure and can be adjusted to describe a creep behavior using the material parameters obtained from uniaxial tensile tests.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.435-446
• /
• 1996

In this paper, we present database model of directory systems that perform a task for distributed information repositories in communication network environments. A new model is developed through four phase: (1) A diretory database information is classified that would be stored in directory database as user, administrative, and supplementary information. (2) The modeling criteria are captured that would be used to model information classified. (3) Object-Oriented concepts are used in modeling classified information according to modeling criteria captured. (4) Methods applied to developed model are grouped, and active-based mechanisms such as trigger and constraints are developed. These selected methods and attributes are encapsulated into objects. Consequently they compose an Active Object-Oriented Directory Database Model.

• Journal of The Korean Association of Information Education
• /
• v.1 no.2
• /
• pp.1-15
• /
• 1997

In this paper we present database model for Intelligent Peripheral (IP) of Advanced Intelligent Network (AIN). The new model is developed through four phase. (1) An information of AIN IP is classified that would be stored in AIN IP database as specialized resources, service. schema and system information. (2) The modeling criteria are developed that would be used to model information classified. (3) Object-oriented concepts are used in modelifl8 classified information according to modeling criteria captured. (4) Methods applied to developed model are grouped, and active-based mechnisms such as trigger and constraints are developed. These selected methods and attributes are encapsulated into objects. Consequently they compose an active object-oriented AIN IP database model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.423-428
• /
• 2010

In the initial design phase of superscalar microprocessors, a performance model is necessary. A theoretic performance model is very useful since performance for various architecture parameters can be obtained by simply computing equations, without repeating simulations, Previous studies established theoretic performance models using the relation between the instruction window size and the issue width, with the penalties due to branch mispredictions and cache misses. However, the study was intended for unlimited number of functional units, which is insufficient for the real case application. This paper proposes a superscalar microprocessor theoretical performance model which also works for the limited functional units. To enhance the accuracy of our limited functional unit model, instruction dependency rates are employed. By using trace-driven data of SPEC 2000 integer programs as input, this paper shows that the theoretically computed performance of superscalar microprocessor with limited number of functional units is quite similar to the measured performance.

• Journal of the Korean Ceramic Society
• /
• v.30 no.11
• /
• pp.962-966
• /
• 1993

Effect of Fe content on the electrical properties of Zn2Y (Ba2Zn2Fe12O22) was studied by investigating X-ray diffraction patterns, microstructure and resistivity of samples. When x(Ba2Zn2Fe12＋xO$\delta$) is between ＋1 and -1, Zn2Y single phase was obtained and electrical resistivity was inversely proportional to Fe content. The possible defect model of Zn2Y was proposed based on the observation. When x<-1 or x>1, second phase(ZnFe2O4 for x<-1, ZnFe2O4 and Ba3Zn3Fe24O41 for x>1) were observed and the electrical resistivity was inversely proportional to the sample density. The activation energy of electrical conductivity of the stoichiometric Zn2Y was 0.49eV below 20$0^{\circ}C$ and 0.07eV above 50$0^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.89-96
• /
• 1982

The purpose of this study is to identify the phases of four different types, low-copper lathe cut (Type II, class 1) and spherical (Type II, class 2) amalgam alloys which are made by Caulk company and high copper Dispersalloy (Type II, class 3) made by Johnson & Johnson and Tytin (Type I, class 2) made by S.S. White and to determine the Vickers hardness number on the individual phase and four different types of dental amalgam. After each amalgam alloy and Hg measured exactly by the balance was triturated by the mechanical amalgamator (De Trey), the triturated mass was inserted into the cylindrical metal mold which was 4 mm in diameter and 12mm in height and was pressed by the Instron Universal Testing machine (Model 1125) at the speed of 1mm/minute with 143$kg/cm^2$ according to the A.D.A. Specification No. 1. The Specimen removed from the mold, mounted and stored in the room temperature for 7 days. The speciman was polished with the emery paper from #220 to #1200 and finally on the polishing cloth with 0.3 and 0.05 um $Al_2O_3$ powder suspended in water. And then each specimen was etched by Allan's method and washed with Sodium Bisulfinite for 30 seconds. Finally differentiation and metallography on each phase were obtained by using metallographical microscope (Versamet, Union) and microhardness was obtained by using microhardness tester (MVH-2, Torsee). The results were as follows: 1. In the low-copper amalgam, the ${\gamma}$, ${\gamma}_1$ and ${\gamma}_2$ phase were observed and in the high-copper amalgam, the ${\gamma}$, ${\gamma}_1$. ${\epsilon}$ and ${\eta}$ phases were observed but ${\gamma}_2$ phase was not observed. 2. Among the microhardness of each amalgam phase measured under pressing a vickers diamond indenter with 2.0gm load for 30 seconds, e phase has the highest V.H.N (314 ${\pm}$ 20), and in low-copper amalgam 12 phase has the lowest V.H.N. (29${\pm}$1) and ${\eta}$ phase which was observed in high-copper amalgam has 230${\pm}$13 V.H.N and this phase is considerd to contribute to strengthen the handness in amalgam. 3. The V.H.N. measured under pressing a Vickers diamond indenter with 300.0gm load for 30 seconds in low-copper amalgam was lower than that of high-copper amalgam.

• Animal cells and systems
• /
• v.16 no.1
• /
• pp.27-33
• /
• 2012

The suprachiasmatic nucleus (SCN) of the teleost hypothalamus contains a central circadian pacemaker, which adjusts circadian rhythms within the body to environmental light-dark cycles. It has been shown that exposure to darkness during the day causes phase shifts in circadian rhythms. In this study, we examined the effect of exposure to darkness on the mRNA expression levels of two circadian clock genes, namely, $Period2$ ($Per2$) and $Cryptochrome1$ ($Cry1$), and the rate-limiting enzyme in melatonin synthesis, arylalkylamine $N$-acetyltransferase-2 (Aanat2), in the pineal gland of olive flounder, $Paralichthys$ $olivaceus$. The expression of these genes showed circadian variations and was significantly higher during the dark phase. These changes may be involved in the mechanism of dark-induced phase shifts. Furthermore, this study suggests that olive flounder may be a teleost model to investigate the localization and function of circadian oscillators.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.642-646
• /
• 2004

시스템 패킷 인터페이스 4레벨 2단계(System Packet Interface Leve1 4 Phase 2)는 10Gbps 이더넷 응용뿐만 아니라, OC-192 대역폭의 ATM 및 POS를 통한 패킷 또는 셀 전송을 위한 물리계층과 링크계층 소자간의 인터페이스이다. 본 논문에서는 시스템 패킷 인터페이스 4레벨 2단계(SPI-4.2)에 대한 연구와 C언어를 이용한 성능평가를 토대로 모듈을 VHDL언어를 이용하여 설계하였다. 성능평가시 확인된 짧은 패킷이 유입되었을 때 PCW와 다음 PCW의 거리를 16바이트 이상을 유지하기 위해 ICW가 삽입되어 많은 오버헤드를 발생시켰다. 작은 패킷이 유입되었을 때 오버헤드를 최소화하기 위해 ICW생성을 최대한 제한하게 설계하여 짧은 패킷 유입시의 오버헤드를 감소하는 SPI-4.2 인터페이스 수신부 모듈을 설계하였다. 설계한 모듈은 라인당 720Mbps를 지원하여 총 대역폭이 11.52Gb/s의 전송률을 나타내어 더욱 안정적으로 패킷을 인터페이스 할 수 있다. XilinxISE 5.1i 툴을 이용하여 VHDL언어로 설계하였고, Model_SIM 5.6a를 이용하여 시뮬레이션 하였다. SPI-4.2 인터페이스 모듈은 기가비트/테라비트 라우터, 광학 크로스바 스위치 및 SONET/SDH 기반의 수신 시스템에서 라인카드로 사용할 경우 적합할 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.133-138
• /
• 2018

Safety management has become even more important because of the safety and environmental issues that have arisen since the 2000s. However, the safety study requires many empirical data, so there are many limitations. In the case of pipe safety, simulation programs exist, but it is difficult to get data about the pipe internal erosion of the pipe. In this study, the erosion rate of the pipe elbow was simulated using computational fluid dynamics (CFD). Also, the failure period of the pipe was calculated by the limit state function using erosion rate. In the case of CFD pipe, a sample which is actually operated in Yeosu industrial complex was used, and the geometry and mesh formation were rationalized in terms of typical fluid dynamics simulations. Using the Discrete Phase Model (DPM) and the corrosion model, the erosion rate ($3.09227mm{\cdot}yr^{-1}$) was obtained from CFD simulations. As a result of applying the erosion rate to the limit state function, we obtained the pipe failure period value, 14.2 years to trigger a leak and 28.2 years to trigger a burst. Through these processes, we concluded that pipe erosion is one of the major failure modes. In addition to the results, this study has significance for suggesting the methodology of the pipe safety study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.27-41
• /
• 2011

This research proposes new tram signal coordination model, called MAXBAND MILP-Tram for a passive tram signal priority strategy. The proposed model was formulated based on the MAXBAND model that was a traditional arterial signal optimization model. The model could calculate the bandwidth solutions for both general-purpose-lane traffic and median-tram-lane traffic. Lower progression speed are applied for the tram traffic considering lower running speed and dwell time at the stations. A phase sequence procedure determines the green times and left-turn phase sequences for tram traffic in median tram lane. To estimate the performance of the MILP-Tram model, the control delay of trams were estimated using the micro simulation model, VISSIM. The analysis results showed 57 percent decrease of the tram compared to the conventional signal timing model. The delay for car, however, increased 18 percent. The sensitivity analysis indicated that the passive tram signal priority strategy using the offset and phase sequence optimization was effective in reducing the person delay under the congested traffic condition.