• ETRI Journal
• /
• v.39 no.2
• /
• pp.213-221
• /
• 2017

The advent of wireless access in vehicular environments (WAVE) technology has improved the intelligence of transportation systems and enabled generic traffic problems to be solved automatically. Based on the IEEE 802.11p standard for vehicle-to-anything (V2X) communications, WAVE provides wireless links with latencies less than 100 ms to vehicles operating at speeds up to 200 km/h. To date, most research has been based on field test results. In contrast, this paper presents a numerical analysis of the V2X broadcast throughput limit using a path loss model. First, the maximum throughput and minimum delay limit were obtained from the MAC frame format of IEEE 802.11p. Second, the packet error probability was derived for additive white Gaussian noise and fading channel conditions. Finally, the maximum throughput limit of the system was derived from the packet error rate using a two-ray path loss model for a typical highway topology. The throughput was analyzed for each data rate, which allowed the performance at the different data rates to be compared. The analysis method can be easily applied to different topologies by substituting an appropriate target path loss model.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.116-121
• /
• 2020

With the recent development of the 4th Industrial Revolution, efforts have been made to carry out communication in a smart factory, farm, etc. at low cost and reliably. Methods for utilizing empty frequencies using TVWS(TV White Space) have been studied which can be used locally within 30 km. However, there have not been many studies on Path-Loss model considering Korean environment. In this paper, the Path-Loss model is divided into LOS (Line Of Sight) and NLOS (None LOS). In case of LOS model, we checked the difference between Free space model, Friis model, 2-ray model and Hata model with measured data. In the case of NLOS model, we checked the difference between Lee Model, ITU-R526-3 Model with measured data. In order to overcome the difference in Korean environment, we derived a model that can be applied in LOS and NLOS and prove its usefulness through performance evaluation through simulation.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.119.2-119.2
• /
• 2007

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.736-742
• /
• 2003

This paper presents the propagation path loss in a tunnel which is a kinds of underground environments. To predict propagation path loss more accurately, we choose a straight tunnel with rectangular cross-section. The simulated receiver powers that are using a hybrid waveguide model and a Ray-Tracing method, are compared with the measured ones as a function of distance between TX and RX antennas in tunnel. The attenuation value of regression analysis for measured power in the tunnel is 0.0238dB/m which is similar to the one of the EH1.2 mode, 0.0246dB/m in hybrid waveguide model. By comparing simulation with measurement in tunnels, it has been shown that the measured values are approximate to the simulated results of ray-tracing model. In the analysis of wide-band channel characteristics of the tunnel, the more the distance between TX and RX antennas in tunnel increases, RMS delay spread increases and coherence bandwidth decreases.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.62-73
• /
• 2001

In this paper, performance of DSRC systems is analyzed with considering the real roads and height of vehicles. The channels are modeled as 2-Ray and 4-Ray with a direct wave and reflected waves by a road and buildings in a physical layer because DSRC keeps LOS propagation characteristics, and the pass loss for each model is calculated respectively. Rician factor is obtained through the calculated path loss on two models for DSRC, and the performance of the systems is analyzed in AWGN and Rician fading channels, Impulsive noise and Rician fading channels respectively. As a result, in Rician fading channels with impulsive noise(A=0.2, ${\Gamma}^{\prime}=0.22$), BER is below $10^{-6}$ when the distance is farther than 80[m] and 40[m] in 2-Ray model and 4-Ray model respectively. For performance improvement, BCH coding scheme and MRC diversity scheme are adopted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.444-452
• /
• 2017

Recently, a demand of Internet-of-things (IoT) rises dramatically and an interest in Low Power Wide Area (LPWA) grows larger accordingly. In this paper, performance in LoRa which is included in LPWA standard is analyzed. Particularly, after measuring Received Signal Strength Indication (RSSI) of received signal on Line-of-sight (LoS) and Non-line-of-sight (NLoS) environment and it is compared with RSSI which theoretical path loss model is applied to. Among many path loss models, the simulation for theoretical RSSI use Log-distance, Two-ray model and Okumura-Hata model that is based on the test database. Consequently, the result of Okumura-Hata model is the most similar with the measured RSSI. When a network based on LoRa is built, this result can used to decide optimal node arrangement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.824-832
• /
• 1998

The significant additional path loss is caused by scattering, diffraction, and attenuation of propagation. Most of the wave propagation models for rural areas mainly have considered the influence of topography but ignored the effects due to land usage. The goal of this paper is development of the field strength prediction program for Cheju which is used the contour map and the effects due to land usage. In oder to classify the propagation path and divide the environment of land, data of the terrain and the land-cover are formed into a pixel. Two-ray model is transformed into equivalent model by the predicted reflection coefficient and the slope of terrain. For non line of sight, the additional loss is determined by quantitative analysis. The result show good accord and the wave propagation model program can be applied to predicted the service region in rural area of Cheju.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1764-1773
• /
• 2018

A-PET is a quad-head PET scanner developed for use in small-animal imaging. The dimensions of its volumetric field of view (FOV) are $46.1{\times}46.1{\times}46.1mm^3$ and the gap between the detector modules has been minimized in order to provide a highly sensitive system. However, such a small FOV together with the quad-head geometry causes image quality degradation. The main factor related to image degradation for the quad-head PET is the mispositioning of events caused by the penetration effect in the detector. In this paper, we propose a precise method for modelling the system at the high spatial resolution of the A-PET using a LOR (line of response) based ML-EM (maximum likelihood expectation maximization) that allows for penetration effects. The proposed system model provides the detection probability of every possible ray-path via crystal sampling methods. For the ray-path sampling, the sub-LORs are defined by connecting the sampling points of the crystal pair. We incorporate the detection probability of each sub-LOR into the model by calculating the penetration effect. For comparison, we used a standard LOR-based model and a Monte Carlo-based modeling approach, and evaluated the reconstructed images using both the National Electrical Manufacturers Association NU 4-2008 standards and the Geant4 Application for Tomographic Emission simulation toolkit (GATE). An average full width at half maximum (FWHM) at different locations of 1.77 mm and 1.79 mm are obtained using the proposed system model and standard LOR system model, which does not include penetration effects, respectively. The standard deviation of the uniform region in the NEMA image quality phantom is 2.14% for the proposed method and 14.3% for the LOR system model, indicating that the proposed model out-performs the standard LOR-based model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.179-187
• /
• 2010

The use of high frequency band, broad band and MIMO antenna is expected in the next generation mobile communication system. By the rapid increase of demand for wireless communications and the explosive increase of the mobile communication services, researches for optimization of next-generation mobile communication system are required. In the existing MIMO channel models, propagation-environments are commonly classified into urban, suburban, rural area, etc. However such approaches can have drawbacks in that many different morphologies may exist even in the urban area, for example. In this paper, we introduced path morphology concept, and proposed the method of morphology classification considering the building height, density, etc. Delay spread(DS), angular spread(AS) of AoD and AoA analyzed for each environment using the ray tracing technique. Based on the analysis, a MIMO channel model appropriate in domestic environment was suggested.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.80-85
• /
• 2015

The era of intelligent transportation system(ITS) has been arrived by applying information and communication technology(ICT) to the traffic. One of these technological advances is a wireless communication technology for a high speed vehicle to be connected to an infrastructure(V2I). A variety of road traffic safety services and operator comfort services are being developed by means of WAVE(Wireless Access in a Vehicular Environment) based on IEEE802.11p Standard. In this paper, the link budget is analyzed to provide a reliable quality of these ITS services. Log-distance model and two-ray model is employed for the wave propagation path loss model which is adequate for a highway environment. Reliable cell coverage is suggested for ITS services from the link budget.