• Structural Engineering and Mechanics
• /
• v.87 no.6
• /
• pp.601-614
• /
• 2023

In this study, the uniaxial ratcheting effect of Z2CND18.12N austenitic stainless steel at room and elevated temperatures is firstly simulated based on the Ahmadzadeh-Varvani hardening rule (A-V model), which is embedded into the finite element software ABAQUS by writing the user material subroutine UMAT. The results show that the predicted results of A-V model are lower than the experimental data, and the A-V model is difficult to control ratcheting strain rate. In order to improve the predictive ability of the A-V model, the parameter γ2 of the A-V model is modified using the isotropic hardening criterion, and the extended A-V model is proposed. Comparing the predicted results of the above two models with the experimental data, it is shown that the prediction results of the extended A-V model are in good agreement with the experimental data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.62-72
• /
• 2007

Fracture analysis of human bone is necessary to predict the failure of musculoskeletal structures and to heal them by several possible mechanisms under different loading conditions. But human bone is a complex material, with a multiphase, heterogeneous and anisotropic microstructure. Due to the difficulty of obtaining experimental and clinical results, the importance of numerical analysis and computational simulations in biomechanics are increasing gradually. In this study, stress analysis for human femur model is performed by using the 2-dimensional finite element method(FEM) and its stress distribution is determined. From these results, the fracture mechanic parameters are calculated and the fracture criteria on human femur are investigated and discussed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.121-126
• /
• 2000

In the fast sampling limit the delta operator model tends to the analog system model. This fundamental property of the delta operator model unifies continuous and discrete time control system. In this paper we study robust linear optimal model following servo system in the presence of disturbances and parameter perturbations. A technique to directly design the generalized differential operator based unified control system that covers both differential operator based continuous time and delta operator based discrete time case is presented. The quadratic criterion function for a linear system is used to design the robust unified servo control system The characteristics of the proposed servo system are analysed and simulated to verify the robustness.

• Journal of applied mathematics & informatics
• /
• v.9 no.2
• /
• pp.771-785
• /
• 2002

Many industries like energy, utilities, ice cream and leisure sports are closely related to the weather. In order to hedge weather related risks, they invest their assets with portfolios like option, coupons, future, and other weather derivatives. Among weather related derivatives, CDD and HDD index options are mainly transacted between companies. In this paper, the autocorrelation system of temperature will be checked for several cities in Korea and the parameter estimation will be carried based on the maximum likelihood estimation. Since the log likelihood increase as the number of parameters increases, we adopt the Schwarz information criterion .

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.2
• /
• pp.99-104
• /
• 2002

In this paper, we construct a hybrid intelligent controller based on a fusion scheme of GA(Genetic Algorithm) and FCM(Fuzzy C-Means) clustering-based ANFIS(Adaptive Neuro-Fuzzy Inference System). In the structure identification, a set of fuzzy rules are generated for a given criterion by FCM clustering algorithm. In the parameter identification, premise parameters are optimally searched by adaptive GA. On the other hand, consequent parameters are estimated by RLSE(Recursive Least Square Estimate) to reduce the search space. Finally, we applied the proposed method to the truck backer-upper control and obtained a better performance than previous works.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.9
• /
• pp.77-83
• /
• 1997

Based on the curve segment grouping, an efficient recognition of round objects form partially occuluded round boundaries is proposed. Curve segments are extracted from an image using a criterion based on the intra-segment curvature and local contrast. During the curve segment extraction the boundaries of pratially occluding and occuluded objects are segmented to different curve segments. The extracted segments of constant intra-segment curvature are grouped to different curve segments. The extracted segments of constant intra-segment curvature are grouped nto a round boundary by the proposed grouping algorithm using inter-segment curvature which gives the relatinships among the curve segments of the same round boundary. The 1st and the 2nd order moments are used for the parameter estimation of the best fitted ellipse with round boundary, and then recognition is perfomed based on the estimated parameters. The proposed scheme processes in segment unit and is more efficient in computational complexity and memory requirements those that of the conventional scheme which processed in pixel units. Experimental results show that the proposed technique is very efficient in recognizing the round object sfrom the real images with apples and pumpkins.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.439-445
• /
• 2012

The stress singularity for the excess adhesive on interface of adhesively bonded joint was investigated by using the 2-dimensional elastic boundary element method (BEM). To establish a reasonable strength evaluation method and a fracture criterion for the excess adhesive of interface in adhesively bonded joint, it is necessary to evaluate fracture parameters with various bonding conditions. Under the variations of adhesively bonded thickness (h) and diameter (d) for the excess adhesive, a stress analysis was performed, and from the results, the stress singularity index (${\lambda}$) and the stress singularity factor (${\Gamma}$) were calculated. The variations have a great influences on the stress singularity for the excess adhesive of interface in adhesively bonded joint, and the ${\Gamma}$ is reduced as the "h" and "d" increase.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.220-227
• /
• 2002

This paper describes an integrated approach process to carry out pre-test, model correlation and updating analysis on the sub-frame of a vehicle. In this study, it was found that the modal test could be more efficient when the exciting point was selected on the area with high driving point residue. Such area could be located with the aid of finite element modal analysis. The model correlation was appraised in conjunction with the modal parameters between modal test and finite elements analysis. Also, the finite element model updating was obtained the good resultant using the iteration method based on sensitivity analysis results that carried out the variation of natural frequencies and MAC for the material properties. Finally, optimization of vehicle subframe was carried out the analysis of core location and physical properties by tow steps.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.1
• /
• pp.23-28
• /
• 1987

This paper discusses a reference pattern creation for a speaker-independent Korean isolated word by using the clustering. Tn this paper we permitted to top 3 clusters and created reference pattern by Minimax Criterion. The features parameter used the LPC Coefficients and Autocorrelation and simple Itakura distance measure was used to measure similarity between patterns. With word reference patterns obtained as described above the recognition rate was within one choice only $55.9\%$, two choice only $76.9\%$, three choice only $89.5\%$.

• Restorative Dentistry and Endodontics
• /
• v.41 no.4
• /
• pp.239-245
• /
• 2016

The purpose of this article was to review the changes in translucency of direct esthetic restorative materials after curing, aging and treatment. As a criterion for the evaluation of clinical translucency changes, visual perceptibility threshold in translucency parameter difference (${\Delta}TP$) of 2 was used. Translucency changes after curing were perceivable depending on experimental methods and products (largest ${\Delta}TP$ in resin composites = 15.9). Translucency changes after aging were reported as either relatively stable or showed perceivable changes by aging protocols (largest ${\Delta}TP$ in resin composites = -3.8). Translucency changes after curing, aging and treatment were perceivable in several products and experimental methods. Therefore, shade matching of direct esthetic materials should be performed considering these instabilities of translucency in direct esthetic materials.