• Journal of Oral Medicine and Pain
• /
• 제41권2호
• /
• pp.41-47
• /
• 2016

Purpose: The purpose of this study was to analyze the size and morphology of mandibular condyle and mandibular fossa between temporomandibular joint (TMJ) disc displacement (DD) patients and healthy subjects using cone-beam computed tomography (CBCT). Methods: Twenty healthy subjects and twenty TMJ DD patients participated in this study respectively. We made five measurements in mandibular condyle (medio-lateral dimension, antero-posterior dimension, condyle height, intercondylar distance and intercondylar angle) and two measurements in mandibular fossa (mandibular fossa depth and articular eminence angle) using CBCT image. Results: There was no difference between two groups in medio-lateral dimension. In case of antero-posterior dimension, average of healthy controls was larger than that of TMJ DD patients, but that was not significant statistically. There were no significant differences between two groups in condyle height. Comparing intercondylar distance and intercondylar angle between two groups, there was no significant difference between two groups. In comparison of mandibular fossa depth and articular eminence angle, there was no significant difference between two groups. Conclusions: We couldn't find any definite relationship between TMJ morphology and TMJ DD.

• 과학기술학연구
• /
• 제2권2호
• /
• pp.123-143
• /
• 2002

이 논문의 목적은 과학지식사회학의 대표적 사례 연구에 해당하는 보일의 공기펌프에 대한 세이핀의 연구를 중심으로 사회구성주의의 타당성을 검토하는 것이다. 나는 이 글에서 과학적 활동은 인식적 차원과 비인식적 차원을 갖고 있으며 사회구성주의는 후자를 강조한 나머지 전자의 중요성을 무시함으로써 과학적 지식에 대한 균형 잡힌 이해를 제공할 수 없다는 것을 주장한다. 논의 순서는 우선 진공펌프에 관한 보일과 홉스의 논쟁의 인식적 차원이 검토되고 이어서 비인식적 차원을 강조하는 세이핀의 설명이 검토된다. 이러한 논의를 바탕으로 세이핀의 사회구성주의의 한계점이 지적된다.

• 수산해양교육연구
• /
• 제28권2호
• /
• pp.473-488
• /
• 2016

The purpose of this study is to present as an alternative to a new policy of the regional level about actively adopting of the Sharing Culture and to suggest policy direction of Talent Sharing activities as an intermediary Sharing activities. To achieve this, We derive a significant outcomes as compared mutual to the center of a volunteer manager and volunteer groups for talent sharing activities in Busan Area. As a result, several suggestion are presented as follow : First, we needed to build for systematic control of talent sharing activities around existing volunteer management institution. Second, Supply and Demand control system is needed to build for talent sharing activities at the local government dimension. Third, To reflect the trend of the people watching the activity with some degree of talent, expertise as a talent sharing activity, Talent sharing volunteers are needed for specialized capability verification. Finally, Sharing activities are needed to settle major policy for the systematic management of talent sharing activity and to expanded budget support of local government at the local government dimension.

• 한국패션뷰티학회지
• /
• 제2권3호
• /
• pp.60-67
• /
• 2004

Representing all the parts of human body visible to fit into the script, it can be told that real make-up has been done. Based on the point of view. it will be different from others. To become the beautiful, beauty make-up has to be done, however, to be someone described in the script or any other factions after analyzing characters of being represented, special make-up fits into that category. In the special make-up, there are two different pins: one is 2 dimension make-up which is describing images using dots, lines and colors and other is 3 dimension which will include necessary shapes to figure. Even though there seems to be different between modern technologies and handy work, since accurate measures and graphics have to be used to make perfect character describes in the script, more investments and studies than before have to be made. Real attraction of 3 dimension make-up is building up the images and shapes using unseen abstract images having analyzing characters. It will be decided in the working process called modeling. As having distinguished this part from other make-ups as named prosthetics make-up, proposing means and measures of prosthetics make-up will actually help the others who are studying make-up.

• Preventive Nutrition and Food Science
• /
• 제10권4호
• /
• pp.372-377
• /
• 2005

This study was designed to examine the satisfaction of high school students with different types of foodservice management programs. The importance and the performance of foodservice management programs were evaluated based on the perceptions of high school students about food service characteristics affecting customer satisfactions. The average score of the attributes affecting the importance of school food service program was $4.27\pm0.49$ and the most important attribute was identified as 'the food safety $(4.68\pm0.67)$', followed by 'the taste of food $(4.66\pm0.65)$'. The average scores of all performance dimensions were lower than 3 point. 'Menu dimension' was rated as the lowest dimension $(2.61\pm0.89)$ and 'Food dimension $(2.79\pm0.70)$' was rated as the highest dimension. Significant differences among different types of foodservice management were perceived by respondents in the overall performance (F=40.244, p<0.001). Students who served by contract-conventional management rated significantly higher performance score on all of the performance attributes than the students served by other types of foodservice management. The results of the importance and the performance analysis present that student satisfaction is affected with the type of foodservice management programs and substantial differences lies between the perceptions of foodservice operations and students.

• Restorative Dentistry and Endodontics
• /
• 제35권2호
• /
• pp.88-95
• /
• 2010

이 연구의 목적은 4가지 엔진구동형 NiTi 기구의 근관성형력을 비교하는 것이다. 32개의 투명레진모형을 사용하여 파일의 단면도가 S자 형태이고 "single length"방법으로 근관성형을 시행하는 Mtwo와 crown-down 방법으로 근관성형을 하는 Profile, ProTaper Universal 및 K3로 근관성형을 하였다 (n = 8). 모든 근관은 한사람의 술자가 근단공 크기가 #30이 될 때까지 성형하였다. 기구 사용 전과 후 근관 모양을 디지털 영상을 기록하였고, 컴퓨터 영상 분석 프로그램(Expression Scanner와 Adobe Photoshop CS)으로 평가하였다. 다음과 같은 결론을 얻었다. 근첨으로부터 1, 2, 3, 4, 5, 6, 7 mm 떨어진 부위의 내측과 외측으로 삭제된 레진 양을 측정하였고, 자료는 SPSS법으로 비교 분석하였다. 1. 근관형성 시간은 Mtwo가 84.50초로 가장 짧았으며, 총 작업시간은 K3가 269.37초로 가장 길었다(p < 0.05). 2. 기구의 변형과 파절은 모든 구동형 NiTi 파일에서 발생하지 않았다. 3. 근관 내측 폭경의 변화는 Profile이 1, 2 mm 부위를 제외한 다른 부위에서 가장 적었으며, ProTaper Universal은 모든 부위에서 가장 많았다(p < 0.05). 4. 근관 외측 폭경의 변화는 Mtwo이 1 mm 부위를 제외한 모든 부위에서 가장 적었으며, Profile은 3, 4 mm 부위에서 가장 많았다(p < 0.05). ProTaper Universal와 K3는 1, 2, 6, 7 mm 부위에서 가장 많았다(p < 0.05). 5. 근관중심변위율(centering ratio)은 Profile이 1, 4, 5, 6 mm 부위에서 가장 적었다(p < 0.05). 이상의 결과, 구동성 NiTi 파일을 이용한 만곡 근관의 근관형성은 치경부는 ProTaper와 같은 삭제력이 높은 파일을 사용하는 것이 근관 입구를 효과적으로 넓히고 더 나은 taper를 형성하며, 근단부는 Profile과 같은 근관 중심 변위가 적은 파일을 사용하는 것이 근관형성 시간을 단축하고 근단부의 근관 변형(transportation)을 줄일 수 있다고 판단된다.

• Journal of Chest Surgery
• /
• 제19권4호
• /
• pp.750-759
• /
• 1986

Spontaneous pneumothorax is usually seen in young adult male. And typically, the patient is a tall, thin, 20- to 30-year-old male. Usually the pneumothorax results from rupture of a pulmonary bleb. Author reviewed 66 cases of spontaneous pneumothorax experienced in the Dept. of Thoracic & Cardiovascular Surgery, Pusan National University Hospital, since Jan., 1980 to Aug., 1986. The clinical data were summarized as follows: 1. The age distribution of spontaneous pneumothorax: 17 to 34 years old and mean age was 25.3 years. 2. The sex distribution of spontaneous pneumothorax: 52 in men, 14 in women and the ratio was 3.7:1. 3. Chest dimension in male patients: Maximum posteroanterior distance [MPA], MPA/Maximum width [MW]: Significantly smaller than control group. Distance from second to tenth rib on left [L2-10], Distance from second rib on right to diaphragm [R2-D], R2-D/MW: Significantly larger than control group. 4. Chest dimension in female patients: MPA, MW: Significantly smaller than control group. Distance from second rib on left to diaphragm [L2-D], Distance from second to tenth rib on right [R2-10], R2-D, L2-10/MW, L2-D/MW, R2-10/MW, R2-D/MW: Significantly larger than control group.

• Journal of the Korean Wood Science and Technology
• /
• 제17권3호
• /
• pp.67-81
• /
• 1989

This experiment was carried out to know the mothod of changing the step of moisture content schedule with time in conventional kiln drying. For the purpose of this object. we made drying model by applying the moisture diffusion model by J.FSiau(1984) to average moisture content equation by J.Crank(1956) derived it from Fick's second law. And to verify this method of drying model. 2.5cm-thick boards and 5.0cm-thick dimension lumbers of Pinus densiflora were kiln-dried with the schedule of T11-C3 and T10-C4, respectively. And then the drying rates were investigated and compared with those calculated from drying model. The results obtained were as follows 1. Average drying rate and total drying time of board to dry to 6.5% moisture content were 0.64%/hr and 109hr., and those of dimension lumber to dry to 8.3% moisture content were 0.4%/hr. and 162hr., respectively. 2. The moisture content of shell and core decreased by equalizing treatment and increased by conditioning treatment both on board and dimension lumber. But the moisture gradient was lower after conditioning than after equalizing. 3. As the drying was proceeded, the transverse bound water diffusion coefficient all but linearly decreased, the water vapor diffusion coefficient abruptly curvilinearly increased, while the transverse diffusion coefficient curvilinearly decreased both on board and dimension lumber. But each of diffusion coefficients on board was larger than that on dimension lumber. 4. Compared to experimential drying rate of board. theoretical drying rate was larger at 30.0%-21.8% moisture content range and was similiar at 21.8%-5.4% moisture content. And in case of dimension lumber, the drying rate was similiar at 30.0%-16.1% moisture content range but theoretical drying rate was much lower at 16.1%-8.3% moisture content range. 5. The possibility of adapting this drying model to changing the moisture content schedule step with time was in the range of 21.8%-5.4% moisture content on board. And in the case of dimension lumber that was in the range of 30.0%-16.1% moisture content.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.213-213
• /
• 2016

현재 반도체 산업에서는 디바이스의 고 집적화, 고 수율을 목적으로 패턴의 미세화 및 웨이퍼의 대면적화와 같은 이슈가 크게 부각되고 있다. 다중 패터닝(multiple patterning) 기술을 통하여 고 집적 패턴을 구현이 가능해졌으며, 이와 같은 상황에서 각 패턴의 임계치수(critical dimension) 변화는 패턴의 위치 및 품질에 큰 영향을 끼치기 때문에 포토마스크의 임계치수 균일도(critical dimension uniformity, CDU)가 제작 공정에서 주요 파라미터로 인식되고 있다. 반도체 광 리소그래피 공정에서 크롬(Cr) 박막은 사용되는 포토 마스크의 재료로 널리 사용되고 있으며, 이러한 포토마스크는 fused silica, chrome, PR의 박막 층으로 이루어져 있다. 포토마스크의 패턴은 플라즈마 식각 장비를 이용하여 형성하게 되므로, 식각 공정의 플라즈마 균일도를 계측하고 관리 하는 것은 공정 결과물 관리에 필수적이며 전체 반도체 공정 수율에도 큰 영향을 미친다. 흔히, 포토마스크 임계치수는 플라즈마 공정에서의 라디칼 농도 및 식각 선택비에 의해 크게 영향을 받는 것으로 알려져 왔다. 본 연구에서는 Cr 포토마스크 에칭 공정에서의 Cl2/O2 공정 플라즈마에 대해 O2 가스 주입량에 따른 식각 선택비(etch selectivity) 변화를 계측하여 선택비 제어를 통한 Cr 포토마스크 임계치수 균일도 향상을 실험적으로 입증하였다. 연구에서 사용한 플라즈마 계측 방법인 발광분광법(OES)과 optical actinometry의 적합성을 확인하기 위해서 Cl2 가스 주입량에 따른 actinometer 기체(Ar)에 대한 atomic Cl 농도비를 계측하였고, actinometry 이론에 근거하여 linear regression error 1.9%을 보였다. 다음으로, O2 가스 주입비에 따른 Cr 및 PR의 식각률(etch rate)을 계측함으로써 식각 선택비(etch selectivity)의 변화율이 적은 O2 가스 농도 범위(8-14%)를 확인하였고, 이 구간에서 임계치수 균일도가 가장 좋을 것으로 예상할 수 있었다. (그림 1) 또한, spatially resolvable optical emission spectrometer(SROES)를 사용하여 플라즈마 챔버 내부의 O atom 및 Cl radical의 공간 농도 분포를 확인하였다. 포토마스크의 임계치수 균일도(CDU)는 챔버 내부의 식각 선택비의 변화율에 강하게 영향을 받을 것으로 예상하였고, 이를 입증하기 위해 각각 다른 O2 농도 환경에서 포토마스크 임계치수 값을 확인하였다. (표1) O2 11%에서 측정된 임계치수 균일도는 1.3nm, 그 외의 O2 가스 주입량에 대해서는 임계치수 균일도 ~1.7nm의 범위를 보이며, 이는 25% 임계치수 균일도 향상을 의미함을 보인다.

• 대한한의진단학회지
• /
• 제11권2호
• /
• pp.96-115
• /
• 2007

Background and Purpose: Electroencephalogram(EEG) is a multi-scaled signal consisting of several components of time series with different origins. Recently, because of the absence of an identified metric which quantifies the complex amount of information, there are many limitations in using such a linear method. According to chaos theory, irregular signals of EEG can also result from low dimensional deterministic chaos. Chaotic nonlinear dynamics in the EEG can be studied by calculating the correlation dimension. The aim of this study is to analyze correlation between the correlation dimension of EEG and psychological Test (TCI). Methods: Before and after moxibustion treatment, EEG raw data were measured by moving windows during 15 minutes. The correlation dimension(D2) was calculated from stabilized 40 seconds in 15 minutes data. 8 channels EEG study on the Fp, F, T, P was carried out in 30 subjects. Results: Correlation analysis of TCI test is calculated with deterministic non-linear data and stochastic non-linear data. 1. Novelty seeking in temperament is positive correlated with D2 of EEG on Fp. 2. reward dependence in temperament is positive correlated with D2 of EEG on T3,T4 and negative correlated with D2 of EEG on P3,P4. 3. self directedness in character is positive correlated with D2 of EEG on F4, P3. 4. Harm avoidance is negative correlated with D2 of EEG on Fp2, T3, P3. Conclusion: These results suggest that nonlinear analysis of EEG can quantify dynamic state of brain abolut psychological Test (TCI).