• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.57-60
• /
• 2001

In the distributed control systems where the control components, controllers and sensors are distributed on a communications network, there exit network time delays on communication lines between the system components. This paper deals with the 2 D.O.F. ramp tracking controller design issue for such system. Time delay terms are converted into rational terms using Pade approximation method and the system is augmented with two integrators for ramp tracking. For this system, $\mu$-controller design method, which enables to meet not only performance requirements but robust stabilities simultaneously, is employed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.319-319
• /
• 2000

In this paper, A dead-time compensator (DTC) for the processes with long dead-time is proposed. The processes which consist of dead-time, time-constant, gain are estimated by the linear least squares method in the frequency domain. A Smith predictor(SP) modified by including a filter becomes a two degree of freedom DTC. So the proposed DTC can yield the desirable setpoint and load disturbance responses separately. PI controller is used for the primary controller and the filter is tuned to be robust. Simulation examples demonstrate the properties of the proposed DTC.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1519-1522
• /
• 1996

In this paper, we have developed a tele-robotic system for nozzle dam installation/removal works and tube relating maintenance works inside unclear power plant steam generator. Developed tele-robotic system consists of many hardwares including robot and a control system. Based on the 3 dimensional graphic simulation, a 6 D.O.F. hydraulic actuated robot and a 2 D.O.F. robot install/removal device have been developed. And also we deviced special tools for nozzle dam carry and bolting. For the tele-robot and other devices to be controlled at the nonradioactive area outside reactor containment building, we developed a tele-robot control system consisting of supervisory controller and remote controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.69-72
• /
• 1997

A universal controller is designed using a DSP (digital signal processor). The design objectives of the system are to implement control algorithms that require a lot of calculations and to develop a convenient user-interface environment. To demonstrate the efficiency of the system, the time delay control algorithm is implemented for the 2 D.O.F.SCARA type robot and the experimental results are presented.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.607-612
• /
• 1998

In this paper, a controller using fuzzy-genetic algorithms is proposed for pat-tracking of WMR. A fuzzy controller is implemented so as to adjust appropriate crossover rate and mutation rate. A genetic algorithms is also implemented to have adaptive adjustment of control gain during optimizing process. To check effectiveness of this algorithms, computer simulation is applied.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1125-1131
• /
• 2012

농촌 노동력의 급격한 감소 및 고령화에 따라 저가의 농업로봇의 개발이 시급한 과제가 되어왔다. 본 논문에서는 농업용 방제 로봇의 H/W제어구조 및 S/W 플랫폼 개발에 대하여 기술한다. 개발된 로봇은 2 축의 캐터필러형 구동부와 2축의 방제기구 제어부를 구동부로 갖추고 있다. H/W 제어구조로써, 임베디드 XPE 기반 로봇 제어부, 원격 조종부, 그리고 센서 제어부로 구성된다. SW 플랫폼에서는 태스크 매니저, 원격 영상 및 데이터 통신을 위한 TCP-IP 통신 프로세스, 구동부 제어 프로세스, 위치 및 환경 인식 프로세스, 센서제어부 프로세스 등 5개의 프로세스가 동시에 동작한다. 개발된 농업용 원격 방제로봇을 필드테스트를 통하여 유용성을 시험하였다.

• 한국지능시스템학회논문지
• /
• 제2권3호
• /
• pp.58-67
• /
• 1992

This paper presents a method on applying Genetric Algorithms(GA), which is a well-know high performance optimizing algorithm, to construct the self-organizing fuzzy logic controller. Fuzzy logic controller considered in this paper utilized Sugeno's hybrid inference method. which has an advantage of simple defuzzification process in the inference engine. Genetic algorithm is used to find the iptimal parameters in the FLC. The proposed approach will be demonstrated using 2 d. o. f robot manipulator to verify its effectiveness.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1344-1351
• /
• 2004

This study develops a haptic display model which is an indispensable for the force generation in the virtual environment. In developing the haptic display model, a Proxy concept and a Karnopp friction model are utilized to generate the reaction force and the friction force. Also this study develops a 2 D.O.F. remote wiping system. This system is composed of a 2 D.O.F. master manipulator, a force sensor equipped 2 D.O.F. slave manipulator and a real time controller. With the developed remote wiping system, this study identifies the friction characteristic of the aluminum, acryl and rubber plate. The results are used as the dynamic friction coefficient of the haptic display model. This study shows the efficiency of the developed haptic display model by the comparison between the friction characteristic of the haptic display with the developed haptic display model and the friction characteristic of the real aluminum, acryl and rubber plate.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.1029-1037
• /
• 2004

High-speed/precision servomechanisms have been widely used in the manufacturing and semiconductor industries. In order to ensure the required high-speed and high-precision specifications in servomechanisms, an integrated design methodology is required, where the interactions between mechanical and electrical subsystems will have to be considered simultaneously. For the first step of the integrated design process, it is necessary to obtain not only strict mathematical models of separate subsystems but also formulation of an integrated design problem. A two-degree-of-freedom controller described in the discrete-time domain is considered as an electrical subsystem in this paper. An accurate identification process of the mechanical subsystem is conducted to verify the obtained mathematical model. Mechanical and electrical constraints render the integrated design problem accurate. Analysis of the system performance according to design and operating parameters is conducted for better understanding of the dynamic behavior and interactions of the servomechanism. Experiments are performed to verify the validity of the integrated design problem in the x-Y positioning system.

• 정보학연구
• /
• 제5권4호
• /
• pp.73-79
• /
• 2002

본 논문에서는 퍼지 제어기의 설계를 위한 다중 돌연변이 연산자를 갖는 Niche Meta 유전 알고리즘을 제안한다. 제안된 알고리즘에서 유전자는 유전 알고리즘에 사용되는 교배율이나 돌연변이율과 같은 구조 매개변수와 퍼지 제어기의 입$cdot$출력 소속함수를 나타내는 매개변수로 구성된다. 제안된 알고리즘은 부개체군들에 대해 퍼지 제어기의 소속함수의 매개변수를 최적화시키는 지역적 탐색을 수행하면서 전체 개체군에 대해서 최적의 구조 매개변수에 대한 전역적인 탐색을 수행한다. 다중 돌연변이 연산자는 지역적 진화의 결과에 따라 진화에 가장 적합한 돌연변이 방법으로 선택된다. 제안된 알고리즘의 효율성을 입증하기 위해 2 자유도 구륜 이동 로봇에 대한 모의 실험을 수행한다.