• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.276-290
• /
• 2024

A study of the transition from transitory state to steady state in DSSCs based on natural dyes is presented; cochineal was used as dye and Li⁺, Na⁺, and K⁺ were the ions added to the electrolyte. The photocurrent profiles were obtained as a function of time. Several DSSCs were prepared with different cations and their role and the transitory-to-steady transition was determined. A novel hybrid charge carrier source model based on the Heaviside function H(t) and the Lambert-Beer law, was developed and applied to analysis of the transient response of the output photocurrent. Additionally, the maximum effective light absorption coefficient α and the electronic extraction rate κ for each ion were determined: ${\alpha}_{Li^+,Na^+,K^+}\,=\,(0.486,\,0.00085,\,0.1126)\,cm^{-1}$, and also the electronic extraction rate ${\kappa}^{Li^+,Na^+,K^+}_{ext.}\,=\,(1410,\,19.07,\,19.69)\,cm\,s^{-1}$. The impedance model using Fick's second law was developed for carrier recombination to characterize the photocurrent.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.75-81
• /
• 2001

The metallurgical study of microconstituents in transient liquid phase bonded joints of Ni-base single crystal superalloys, CMSX-2 and CMSX-4 was investigated employing MBF-80 insert metal. TLP bonding of specimens was carried out at 1,373~1,523K for 0~19.6ks in vacuum. Three types of microconstituents ; needle-like constituent, dot-like constituent and abnormal shape constituent were formed in the bonded interlayer during TLP bonding operation. All these microconstituents were identified as boride. Microconstituents contain a large percentage of Cr in the early stage of bonding. As increasing the holding time, the amount of Cr was decreased and the amount of W, Co and Re were increased. From the analysis results of electron diffraction pattern by TEM, composition of elements in microconstituents were into MBlongrightarrowM$_{5}$B$_3$longrightarrowM$_2$B type with the increased in holding time. It can be explained by the fact that the relative amount of boron in microconstituents was decreased when the holding time was increased.d.

• Wind and Structures
• /
• v.12 no.1
• /
• pp.21-47
• /
• 2009

The logarithmic form for turbulent flow analysis guarantees the positivity of the turbulence variables as ${\kappa}$ and ${\varepsilon}$ of the ${\kappa}-{\varepsilon}$ model by using the natural logarithm of these variables. In the present study, the logarithmic form is incorporated into the finite element solution procedure for the unsteady turbulent flow analysis. A backward facing step flow using the standard ${\kappa}-{\varepsilon}$ model and a flow around a 2D square cylinder using the modified ${\kappa}-{\varepsilon}$ model (the Kato-Launder model) are simulated. These results show that the logarithmic form effectively keeps adequate balance of turbulence variables and makes the analysis stable during transient or unsteady processes.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.1
• /
• pp.1-7
• /
• 2013

Objective : This study was undertaken in the belief that the atypical antipsychotic drug quetiapine could prevent apoptosis in the penumbra region following ischemia, taking into account findings that show 5-hydroxytryptamine-2 receptor blockers can prevent apoptosis. Methods : We created 5 groups, each containing 6 animals. Nothing was done on the K-I group used for comparisons with the other groups to make sure adequate ischemia had been achieved. The K-II group was sacrificed on the 1st day after transient focal cerebral ischemia and the K-III group on the 3rd day. The D-I group was administered quetiapine following ischemia and sacrificed on the 1st day while the D-II group was administered quetiapine every day following the ischemia and sacrificed on the 3rd day. The samples were stained with the immunochemical TUNEL method and the number of apoptotic cells were counted. Results : There was a significant difference between the first and third day control groups (K-II/K-III : p=0.004) and this indicates that apoptotic cell death increases with time. This increase was not encountered in the drug groups (D-I/D-II : p=1.00). Statistical analysis of immunohistochemical data revealed that quetiapine decreased the apoptotic cell death that normally increased with time. Conclusion : Quetiapine is already in clinical use and is a safe drug, in contrast to many substances that are used to prevent ischemia and are not normally used clinically. Our results and the literature data indicate that quetiapine could help both as a neuronal protector and to resolve neuropsychiatric problems caused by the ischemia in cerebral ischemia cases.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.2
• /
• pp.1-13
• /
• 2011

Objectives : We investigated the effect of Haein-tang(Hairen-tang) on short-term memory and apoptosis in dentate gyrus of the gerbils with transient global ischemia. Methods : For the induction of cerebral ischemia model in mice, common carotid arteries of gerbils were occluded with aneurysm clips for 5 min. One day after operation, Haein-tang(Hairen-tang) was administrated orally injected once a day for 15 consecutive days. Gerbils were randomly divided into four group(n=10 in each group): sham-operation group, ischemia-induction group, ischemia-induction and 50 mg/kg Haein-tang(Hairen-tang)-treated group, ischemia-induction and 100 mg/kg Haein-tang(Hairen-tang)-treated group, and ischemia-induction and 200 mg/kg Haein-tang(Hairen-tang)-treated group. The effect of Haein-tang(Hairen-tang) on memory function was investigated by using step-down avoidance task. Apoptosis was confirmed by terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling(TUNEL) staining and immunohistochemistry for caspase-3. Western blot analysis for the expressions of Bax and Bcl-2 protein was also conducted. Results : 1. Haein-tang extract significantly enhanced short-term memory in step-down avoidance task and 100 mg/kg, 200 mg/kg Haein-tang-treated group. 2. Haein-tang extract significantly suppressed TUNEL-positive cells after transient global ischemia and 50 mg/kg, 100 mg/kg, 200 mg/kg Haein-tang-treated group. 3. Haein-tang extract significantly increased caspase-3 positive cells in the hippocampal dentate gyrus after transient global ischemia and 50 mg/kg, 100 mg/kg, 200 mg/kg Haein-tang-treated group. 4. Haein-tang extract significantly decreased Bax protein expressions in the hippocampus after transient global ischemia and 100 mg/kg, 200 mg/kg, Haein-tang-treated group. Haein-tang extract significantly increased Bcl-2 protein expressions in the hippocampal dentate gyrus after transient global ischemia and 50 mg/kg, 100 mg/kg, 200 mg/kg, Haein-tang-treated group. Haein-tang extract significantly decreased Ratio of Bax protein to Bcl-2 protein in the hippocampus after transient global ischemia and 100 mg/kg, 200 mg/kg Haein-tang-treated group. Conclusions : While Haein-tang(Hairen-tang) treatment improved short-term memory by suppressing on ischemia-induction apoptosis. In the present study, Haein-tang(Hairen-tang) shows protective effect on transient global ischemia.

• 전기의세계
• /
• v.25 no.1
• /
• pp.95-100
• /
• 1976

The main purpose of this paper is to study on the transient current due to the change of environmental temperature under no external field in the arrangement of M$_{1}$(metal)-P(polyver)-M$_{2}$(metal). The specimer of polymeric insulator sandwiched by two metal electrodes composes a parallel-plate condenser represented by Maxwell-model. The behaviors of short circuit current flowing in M-P-M arrangement are very complex and the analysis of its conduction mechanism appears to be much complicated. In this paper we can suggest that a contact potential difference as an energetic state exists in the thin film specimen both sides of which are contacted by two different metals having different cook functions. Futhermore the contact potential difference appears to be constant through the course of temperature change, however, the dielectric constant and caparitance of the specimen must be temperature dependent. Accordingly the charge difference induced on both sides of electrodes may be a cause for the shory circuited transient current flowing through the external circuit. It is also suggestive that the results of the observation must be considered in cases of insulation design of electrical machines and D.C. cable for high voltage use.

• Journal of Sensor Science and Technology
• /
• v.25 no.6
• /
• pp.423-430
• /
• 2016

This study used a single metal oxide semiconductor (MOS) sensor to classify the major odorous gases hydrogen sulfide ($H_2S$), ammonia ($NH_3$) and toluene ($C_6H_5CH_3$). In order to classify these odorous substances, the voltage on the MOS sensor heater was gradually reduced in 0.5 V steps 5.0 V to examine the changes to the response by the cooling effect on the sensor as the voltage decreased. The hydrogen sulfide gas showed the highest sensitivity compared to odorless air under approximately 2.5 V and the ammonia and toluene gases showed the highest sensitivity under approximately 5.0 V. In other words, the hydrogen sulfide gas reacted better in the low temperature range of the MOS sensor, and the ammonia and toluene gases reacted better in the high-temperature range. In order to analyze the response characteristics of the MOS sensor by temperature in a pattern, a two-dimensional (2D) x-y pattern analysis was introduced to clearly classify the hydrogen sulfide, ammonia, and toluene gases. The hydrogen sulfide gas was identified by a straight line with a slope of 1.73, whereas the ammonia gas had a slope of 0.05 and the toluene gas had a slope of 0.52. Therefore, the 2D x-y pattern analysis is suggested as a new way to classify these odorous substances.

• Computers and Concrete
• /
• v.2 no.4
• /
• pp.249-266
• /
• 2005

In the present paper a transient three-dimensional thermo-mechanical model for concrete is presented. For given boundary conditions, temperature distribution is calculated by employing a three-dimensional transient thermal finite element analysis. Thermal properties of concrete are assumed to be constant and independent of the stress-strain distribution. In the thermo-mechanical model for concrete the total strain tensor is decomposed into pure mechanical strain, free thermal strain and load induced thermal strain. The mechanical strain is calculated by using temperature dependent microplane model for concrete (O$\check{z}$bolt, et al. 2001). The dependency of the macroscopic concrete properties (Young's modulus, tensile and compressive strengths and fracture energy) on temperature is based on the available experimental database. The stress independent free thermal strain is calculated according to the proposal of Nielsen, et al. (2001). The load induced thermal strain is obtained by employing the biparabolic model, which was recently proposed by Nielsen, et al. (2004). It is assumed that the total load induced thermal strain is irrecoverable, i.e., creep component is neglected. The model is implemented into a three-dimensional FE code. The performance of headed stud anchors exposed to fire was studied. Three-dimensional transient thermal FE analysis was carried out for three embedment depths and for four thermal loading histories. The results of the analysis show that the resistance of anchors can be significantly reduced if they are exposed to fire. The largest reduction of the load capacity was obtained for anchors with relatively small embedment depths. The numerical results agree well with the available experimental evidence.

• Nuclear Engineering and Technology
• /
• v.30 no.2
• /
• pp.91-98
• /
• 1998

Time history analysis is usually performed to characterize the nonlinear seismic behavior of a spent fuel storage rack(SFSR). In the past, the seismic analyses of the SFSR were performed with two-dimensional planar models, which could not account for torsional response and simultaneous multi-directional seismic input In this study, three-dimensional seismic analysis methodology is developed for the single SFSR using the ANSYS code. The 3D- Model can be used to determine the nonlinear behavior of the rack, i.e., sliding, uplifting, and impact evaluation between the fuel assembly and rack, and rack and the pool wall, This paper also reviews the 3-D modeling of the SFSR and the adequacy of the ANSYS for the seismic analysis. AS a result of the adquacy study, the method of ANSYS transient analysis with acceleration time history is suitable for the seismic analysis of highly nonlinear structure such as an SFSR but it isn't appropriate to use displacement time history of seismic input.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.5
• /
• pp.197-202
• /
• 2003

When a high-speed train reduces its operating velocity while decelerating from a maximum of 350 to 50 [km/h], the train applies eddy-current brakes, which results in a deceleration time of approximately 3minutes. Therefore, a high current is utilized in order to obtain a large braking force. Consequently, the temperature of the electromagnet and rail increases significantly. In this paper, The thermal characteristics on a single magnet pole with convection heat transfer coefficient are simulated by using 2D-FEM. To verify the analysis results, the computed temperatures are compared with the experimentally measured temperature at stationary state. Furthermore, transient-state thermal analysis is performed to predict the magnet temperatures as the train is decelerating.