• Journal of the Korean Ceramic Society
• /
• v.36 no.10
• /
• pp.1094-1101
• /
• 1999

Liquid phase sintered silicon carbides were obtained by sintering of $\alpha$-SiC and $\beta$-SiC powders as starting materials at 2173K and 2273K respectively. The SiCplatelet seeds of different sizes were obtained by a repeated ball milling and sedimentation. Their mean size (d50) were 2.217 ${\mu}{\textrm}{m}$ 13.67 ${\mu}{\textrm}{m}$, 22.17${\mu}{\textrm}{m}$ respectively 6wt%Al2O3-4 wt% Y2O3 was used as the sintering additives for the liquid phase sintering. The two silicon carbides had a bimodal microstructure consisting of small matrix grains and large platelike grains when the SiCplatelet seeds were added. In the case of the $\beta$-SiC the appreciable phase transformation occurred as sintering temperature increased from 2173K to 2273K and resulted in matrix shape change from equiaxed into platelike grains. In contrast there was no shape change for the $\alpha$-SiC. The size of large grains in the $\alpha$-SiC of large grains in the $\alpha$-SiC was larger than that of the large grains in the $\beta$-SiC These results suggested that the growth of the $\alpha$-SiCplatelet in the $\alpha$-SiC matrix was more favored than that of the $\alpha$-SiCplatelet in the $\beta$-SiC matix. The three point flexural strength decreased as the added seed size increased. Fracture toughness values of samples sintered at 2273K were higher than those of samples sintered at 2173K.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.2
• /
• pp.73-81
• /
• 2007

An efficient regeneration system was developed using leaf, petiole, and internode explants. Highly embryogenic callus was obtained following cultivation on MS basal nutrient supplemented with 2 $mg/{\ell}$ 2,4-D. Globular, heart, torpedo and cotyledon shaped somatic embryo were produced from the surface of embryogenic callus. Direct shoot regeneration without intermediate callus formation has been achieved on MS medium supplemented NAA and BAP. The percentage of response varies with different concentration of auxin and cytokinin treated individually or in combination. The best shoot regeneration response (54.28%) and number of shoot per explant (12.67) were achieved on the medium supplemented with 0.1 $mg/{\ell}$ NAA and 1 $mg/{\ell}$ BAP. The regenerated shoot transformed into young plant when cultured into elongation and root induction medium. More than 90% of in vitro propagated plants could survive when transferred to the greenhouse for acclimation. This optimized regeneration system can be used for rapid shoot proliferation and genetic transformation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.7
• /
• pp.4151-4155
• /
• 2013

Background: To compare response evaluation criteria in solid tumours (RECIST) and volumetric evaluation (VE) for colorectal cancer with liver-limited metastasis. Patients and Methods: VE of liver metastases was performed by manual contouring before and after chemotherapy on 45 pairs of computed tomography (CT) images in 36 patients who suffered from metastatic colorectal cancer (mCRC) with liver metastasis only. Cohen kappa was used to compare the agreement between VE and RECIST. Pearson correlation was performed for their comparison after cubic root transformation of the aggregate tumor volumes. Logistic regression was done to identify clinical and radiographic factors to account for the difference which may be predictive in overall response (OR). Results: There were 16 partial response (PR), 23 stable disease (SD) and 6 progressive disease (PD) cases with VE, and 14 PR, 23 SD and 8 PD with RECIST. VE demonstrated good agreement with RECIST (${\chi}$=0.779). Discordant objective responses were noted in 6 pairs of comparisons (13.3%). Pearson correlation also showed excellent correlation between VE and RECIST ($r^2$=0.966, p<0.001). Subgroup analysis showed that VE was in slightly better agreement with RECIST for enlarging lesions than for shrinking lesions ($r^2$=0.935 and $r^2$=0.780 respectively). No factor was found predictive of the difference in OR between VE and RECIST. Conclusions: VE exhibited good agreement with RECIST. It might be more useful than RECIST in evaluation shrinking lesions in cases of numerous and conglomerate liver metastases.

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.87-93
• /
• 1993

Iron nitride (Fe-N) magnetic thin films were deposited using a DC magnetron sputtering system. Microstructures and magnetic properties were examined as a function of deposition power and nitrogen gas input ratio. The nitrogen content in the film was found to be the major factor determining the microstructure and the magnetic properties. The films deposited at low nitrogen input ratios have an $\alpha$-Fe structure of which the lattice is expanded due to the nitrogen atoms incorporated at the interstitial sites. As the nitrogen content in the film increases, the degree of lat-tice expansion increases and the value of saturation magnetization decreases linearly. The films with a high degree of lattice expansion give very low values of coercivity, which is attributed to the disturbance of colunmar growth and the decrease of surface roughness. Further increase in the nitrogen input ratio causes the phase transfonnation from $\alpha$-Fe to $Fe_{2-3}N$, resulting in the marked reduction in the saturation magnetization. The phase transformation occurs when, regardless of deposition conditions, the nitrogen content reaches at 15 at.% and the lattice is expanded by 5%.

• Korean Journal of Food Science and Technology
• /
• v.8 no.2
• /
• pp.85-89
• /
• 1976

The separation and determination of dicarbonyls such as diacetyl, methylglyoxal and triose reductone in their mixed aqueous solution were carried out by means of gas chromatography with transformation of these compounds into quinoxaline derivatives with o-phenylenediamine. A column used for this experiment was consisted of Celite 545 (80-100 mesh) coated with 5% Silicon Gum SE-30. The column temperature was $180^{\circ}C$. It is desirable that this approach will be applicable to dicabonyl study in gas chromatographic determination.

• Nano
• /
• v.13 no.10
• /
• pp.1850124.1-1850124.12
• /
• 2018

$TiO_2$ films were deposited from oxygen/titanium tetraisopropoxide (TTIP) plasmas at low temperature by Helicon-PECVD at floating potential ($V_f$) or substrate self-bias of -50 V. The influence of titanium precursor partial pressure on the morphology, nanostructure and optical properties was investigated. Low titanium partial pressure ([TTIP] < 0.013 Pa) was applied by controlling the TTIP flow rate which is introduced by its own vapor pressure, whereas higher titanium partial pressure was formed through increasing the flow rate by using a carrier gas (CG). Then the precursor partial pressures [TTIP+CG] = 0:027 Pa and 0.093 Pa were obtained. At $V_f$, all the films exhibit a columnar structure, but the degree of inhomogeneity is decreased with the precursor partial pressure. Phase transformation from anatase ([TTIP] < 0.013 Pa) to amorphous ([TTIP+CG] = 0:093 Pa) has been evidenced since the $O^+_2$ ion to neutral flux ratio in the plasma was decreased and more carbon contained in the film. However, in the case of -50 V, the related growth rate for different precursor partial pressures is slightly (~15%) decreased. The columnar morphology at [TTIP] < 0.013 Pa has been changed into a granular structure, but still homogeneous columns are observed for [TTIP+CG] = 0:027 Pa and 0.093 Pa. Rutile phase has been generated at [TTIP] < 0:013 Pa. Ellipsometry measurements were performed on the films deposited at -50 V; results show that the precursor addition from low to high levels leads to a decrease in refractive index.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.93-98
• /
• 2023

Recently, as the size of display devices tends to increase and taking pictures with smart phones has become commonplace, the need for taking high-resolution pictures with smart phones is increasing. However, when the lens size of a camera is limited, such as in a smartphone, there is a physical limit to increasing the resolution of a photo. This paper is about a technique for increasing the resolution of a picture even when using a small-sized lens like a smartphone camera. It is to take multiple pictures while moving the smartphone, and to increase the resolution by combining these pictures into one picture. First of all, two pictures were taken while moving the smartphone horizontally for the 2D picture. Processes such as camera matrix estimation, and homograph inverse transformation were performed using OpenCV, and the resolution was improved by synthesizing one picture. It was confirmed that the resolution was improved in parts such as oblique lines or arcs on several test pictures.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.79-88
• /
• 2004

Gaze detection is to locate the position on a monitor screen where a user is looking by computer vision. Gaze detection systems have numerous fields of application. They are applicable to the man-machine interface for helping the handicapped to use computers and the view control in three dimensional simulation programs. In our work, we implement it with a computer vision system setting a IR-LED based single camera. To detect the gaze position, we locate facial features, which is effectively performed with IR-LED based camera and SVM(Support Vector Machine). When a user gazes at a position of monitor, we can compute the 3D positions of those features based on 3D rotation and translation estimation and affine transform. Finally, the gaze position by the facial movements is computed from the normal vector of the plane determined by those computed 3D positions of features. In addition, we use a trained neural network to detect the gaze position by eye's movement. As experimental results, we can obtain the facial and eye gaze position on a monitor and the gaze position accuracy between the computed positions and the real ones is about 4.8 cm of RMS error.

• Atmosphere
• /
• v.24 no.3
• /
• pp.433-444
• /
• 2014

Although the Radar-AWS Rainrate (RAR) calculation system operated by Korea Meteorological Administration estimated precipitation using 2-dimensional composite components of single polarization radars, this system has several limitations in estimating the precipitation accurately. To to overcome limitations of the RAR system, the Korea Meteorological Administration developed and operated the RMQ (Radar-based Multi-sensor Quantitative Precipitation Estimation) system, the improved version of NMQ (National Mosaic and Multi-sensor Quantitative Precipitation Estimation) system of NSSL (National Severe Storms Laboratory) for the Korean Peninsula. This study introduced the RMQ system domestically for the first time and verified the precipitation estimation performance of the RMQ system. The RMQ system consists of 4 main parts as the process of handling the single radar data, merging 3D reflectivity, QPE, and displaying result images. The first process (handling of the single radar data) has the pre-process of a radar data (transformation of data format and quality control), the production of a vertical profile of reflectivity and the correction of bright-band, and the conduction of hydrid scan reflectivity. The next process (merger of 3D reflectivity) produces the 3D composite reflectivity field after correcting the quality controlled single radar reflectivity. The QPE process classifies the precipitation types using multi-sensor information and estimates quantitative precipitation using several Z-R relationships which are proper for precipitation types. This process also corrects the precipitation using the AWS position with local gauge correction technique. The last process displays the final results transformed into images in the web-site. This study also estimated the accuracy of the RMQ system with five events in 2012 summer season and compared the results of the RAR (Radar-AWS Rainrate) and RMQ systems. The RMQ system ($2.36mm\;hr^{-1}$ in RMSE on average) is superior to the RAR system ($8.33mm\;hr^{-1}$ in RMSE) and improved by 73.25% in RMSE and 25.56% in correlation coefficient on average. The precipitation composite field images produced by the RMQ system are almost identical to the AWS (Automatic Weather Statioin) images. Therefore, the RMQ system has contributed to improve the accuracy of precipitation estimation using weather radars and operation of the RMQ system in the work field in future enables to cope with the extreme weather conditions actively.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.97-104
• /
• 2009

Complement of test standard, evaluation methods and models are needed to improve national competitiveness and to exchange superior genetic resources through the comparison of genetic evaluation score among nations in dairy cattle. Therefore, this study was conducted for the application of international standard to Korea considering domestic circumstance by changing linear-classification test score system of 50 classes which is currently used in Korea to system of 9 classes which is used in advanced nations of dairy. 15,230 of holstein cow linear type records with first parity records for the fifteen linear type and one total score from 2001 to 2006 and pedigree data which were collected by the Korean Animal Improvement Association were used in this study. Population classified by 9 levels was more normal distributed than 50 levels. Correlation coefficients between 50 and 9 score system showed over 0.98 by each classification scheme. Therefore, the 50 point system can be substituted with 9 point system due to their highly positive correlation. However, scores in all traits were still very contingent on classifier under the 9 point system (p<0.001), and F values between foot angle and front teat attachment showed high fluctuation depending on classifier. It means that subjective opinions of classifier would influence on linear type score as ever even if class scheme transformed to system of 9 class. Therefore, the relevance of transformation to the 9 point system should be assessed after analyses about various environmental factors.