• 한국산업정보학회논문지
• /
• 제24권6호
• /
• pp.25-34
• /
• 2019

가상착용기술(VTON: Virtual try-on)은 의상의 온라인 유통을 활성화를 위하여 중요한 기술이다. 그러나 3차원 그래픽스기반 방식은 의상과 인체의 3차원 정보의 확보가 필요하여 범용화에 어려움이 있고, 이러한 제약을 해소하기 위해 개발되는 이미지 기반 방식들의 연구들은 그 기술적 한계가 불명확하다. 구체적으로 VITON (Virtual image try-on) 과 CP-VTON (Content preserving VTON)등은 가능성 위주의 매우 단편적인 결과만을 제시하고 있다. 본 논문은 이미지기반 기술의 상용화의 한계를 파악하기 위해, 세 가지 대표적 방식(SCMM 기반의 비-딥러닝 방식, 딥러닝기반 VITON 과 CP-VTON에 대하여 인물의 자세 및 체형, 의상의 가려짐 정도, 의상의 특성 등에 따라 분석을 하였다. 객관적인 평가를 위하여 변형단계와 합성단계의 성능을 각각 IoU와 SSIM로 평가하였고, 상대적인 비교 분석을 하였다. 그 결과, CP-VTON이 가장 좋은 성능을 보이지만, 자세와 의상의 복잡도에 따라 성능의 한계가 크게 차이가 남을 보였다. 그 주 원인은 2차 기하변형의 한계와 GAN을 통한 합성 기술의 한계로 파악되었다.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2427-2434
• /
• 2022

Series of unequal quantity Nd/Ce co-doped ceramic nuclear waste forms, (Gd, Nd)₂(Zr, Ce)₂O₇, were prepared to tailor its ordered pyrochlore or disordered fluorite structure. The phase transition, microtopography, and elemental composition of the ceramic samples were systematically investigated, especially the effect of order-disorder structure on the chemical stability. It was confirmed that unequal quantity of Nd/Ce could synchronously replace the Gd/Zr-sites of Gd₂Zr₂O₇. And the phase transition of order-disorder structure could be successfully tailored by regulating the average cationic radius ratio of (Gd, Nd)₂(Zr, Ce)₂O₇ series. The elements of Gd, Nd, Zr, and Ce are uniformly distributed in the ordered or disordered structures. The MCC-1 leaching results showed that (Gd, Nd)₂(Zr, Ce)₂O₇ pyrochlore ceramic nuclear waste forms had excellent chemical stability, whose elements' normalized leaching rates were as low as 10^-4-10^-7 g·m^-2·d^-1 after 7 days. In particular, the chemical stability of disordered structure was superior to that of ordered structure. It was proposed that the force constant and the closest packing were changed with the structure transformation resulting the chemical stability difference.

• 수산해양기술연구
• /
• 제34권1호
• /
• pp.74-84
• /
• 1998

어종식별을 위한 수중음향학적 정보를 수집하는 데 이용하기 위한 초음파 변환기를 설계하기 위한 시도의 하나로서, 본 연구에서는 우선 수중에서의 전기적인 자유 임피던스가 서로 같고, 이주파간의 주파수 차이를 최소화 시켜 이주파 겸용 및 광대역 송.수파기로서 활용이 가능한 복합구조 초음파 변환기를 설계, 제작하였는 데, 이 변환기의 이중공진 진동특성에 대하여 분석, 고찰한 결과를 요약하면 다음과 같다. 1. 기본공진진동을 발생시키기 위해 설계한 Tonpilz형 초음파 변환기의 송파전압감도는 기본공진주파수 36.2 kHz에서 141.4 dB re $1\;\muPa/V$이었고, - 3 dB점에 대한 주파수 대역폭은 1.1 kHz이었으며, 이 변환기의 수중에 대한 전압음향변환효율은 85.2%였다. 2. 복합구조 초음파 변환기의 수중에서의 제1공진점에 대한 공진 및 반공진 주파수는 각각 39.7 kHz, 41.2 kHz이었다. 또한, 제1 및 제2 공진 주파수에 대한 임피던스는 각각 $3.7\;{K\Omega}\;과\;3.3\;{K\Omega}$으로서 거의 유사한 값을 나타내었고, 자유 임피던스 진폭과 위상의 측정치를 양 공진점 부근에서 계산치와 약간의 차이를 나타내었다. 3. 복합구조 초음파 변환기의 송파전압감도는 제1 공진주파수인 34.3 kHz에서 136.5 dB re $1\;\muPa/V$이었고, 제2 공진주파수인 40.4 kHz에서 136.8 dB re $1\;\muPa/V$이었다. 또한, 제1 및 제2 공진 주파수에 대한 - 3 dB 점에서의 주파수 대역폭은 각각 1.2 kHz, 1.1 kHz이었다. 이상의 결과로 부터 본 연구에서 설계, 개발한 복합구조 초음파 변환기는 단순 구조의 Tonpilz형 변환기와 비교하여 비록 송파전압감도에 있어서는 4.9 dB의 손실이 불가피하지만, 그 대신 송파감도가 같은 두 개의 공진주파수를 동시에 이용할 수 있고, 또한 이들 제1일 제2의 공진점에 대한 주파수 간격이 좁으면서도 송파감도의 변동폭이 비교적 작어 어종의 식별정보를 수집하는 데 효과적으로 활용될 수 있을 것이라 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.47-52
• /
• 1998

An analysis of dynamic responses is carried out on monoclinic anisotropic system due to a buried harmonic line source. The load is in the form of a normal stress acting along an arbitrary axis on the plane of symmetry within the orthotropic materials: In case that the line load is acting along the symmetry axis normal to the plane of symmetry, plane wave equation is coupled with verital shear wave and longitudinal wave. However, if the line load is acting along an arbitrary axis normal to the plane of symmetry, plane wave equation is coupled with vertical shear wave, longitudinal wave and horizontal shear wave. We first considered the equation of motion in a reference coordinate system, where the line load is coincident with a symmetry axis of the orthotropic material. Then the equation of motion is transformed into one with respect to general coordinate system with azimuthal angle by using transformation tensor. Plane wave solutions of monoclinic systems are derived for infinite media. Finally complete solutions for the plane harmonic wave are obtained by calculating the inverse of the integral transforms, in which bulk wave poles are avoided by deforming the contour of the integration to the complex plane. Numerical results for examples of orthotropic material belonging to monoclinic symmetry are demonstrated.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.383-391
• /
• 1986

본 논문에서는 이들 기본모우드형태가 검토되었고 또한 두께효과와 비대칭성 효과에 따른 고유진동주파수, 모우드형태, 울림주파수의 변화를 수치적 해석과 실험 적 해석방법에 의해 비교검토되었다. 수치해석방법은 유한요소법으로 이용된 프로그 램은 NASTRAN 프로그램이고 모우드의 형태는 Tectronics컴퓨터그래픽을 이용하여 나타 내었다. 실험적방법은 충격햄머법과 F.F.T. 분석장치(Fast Fourier Transformation Analyzer)를 이용하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.525-530
• /
• 2001

As a part of efforts to examine feasibility of warm forging near-net-shape process for non-heat-treated steel to replace quenched and tempered S45C steel, the optimized process condition has been determined to be $820^{\circ}C$ for heating, 10/sec for strain rate of forging and approximately 250MPa for flow stress from observed results such as the $A_{3}$ transformation temperature of about $790^{\circ}C$, the fully dynamic recrystallized behavior between $800^{\circ}C\;and\;850^{\circ}C$ when compressed up to 63% engineering strain at 10/sec strain rate, and the high temperature microsturctural stability. Also, controlled cooling rate of $6.3^{\circ}C/sec$ by water-spraying at a rate of $0.10cc/sec-cm^{2}$ for 60seconds followed by air-cooling right after forging process has been considered in this study as a feasible approach based on examination of the microsturcture of mixed ${\alpha}-ferrite$ and pearlite, the hardness and tensile properties meeting specification, and the reduced total cooling time to room temperature. Successive works would be carried out for the impact strength, machinalility, and forgeability at this process in the near future.

• 한국작물학회지
• /
• 제50권5호
• /
• pp.356-360
• /
• 2005

Mature embryos were aseptically excised with a scalpel and sliced in fragments measuring 0.5 mm in diameter (sliced mature embryo fragment; 4 ${\~}$ 5 fragments/one embryo). Sliced mature embryo fragments of six wheat cultivars were cultured to develop an efficient method of callus induction and plant regeneration. Callus derived from sliced mature embryo fragments showed a good capacity to embryogenesis and regeneration. Furthermore sliced mature embryo fragments decreased contamination from fungi and bacteria. The high efficiency of callus induction were obtained Keumkangmil and Bob­white. For plant regeneration, selected embryogenic calli were transferred to two types regeneration media. An average number of green spots per callus was 4 to 5 in regeneration media after about one week. Percentage of plant regeneration showed high in regeneration medium containing 0.1 mg/l 2,4-D and 5 mg/l zeatin. Especially, Keumkangmil ($27.5\%$) and Bobwhite ($33.3\%$) showed high regeneration efficiency. This regeneration system from sliced mature embryo fragments may provide an effective and convenient explant for plant transformation studies.

• 한국연초학회지
• /
• 제13권1호
• /
• pp.43-52
• /
• 1991

These studies were carred out to obtain the transformant from tobacco cells by Agrobacterium spp. from crown gall and soil at the natural field in Korea, and identified their virulence. Kodo's and Clark's selective media were used for isolation of Agrobacterium spp. In these media, total of 99 strains were characterized based on the morphological characteristics of colonies. Among them 34 strains were able to induce on carrot discs. And hypervirulent strains C23-1 and K29-1 were identified as Agrobacterium tumefaciens biotype 1 and biotype 2, respectively. These strains formed fast growing, larger gall as compared to those induced by other strains on the carrot discs. Transformed tobacco callus was initiated on the phytohormone free MS medium with 250$\mu\textrm{g}$/ml carbenicillin after co-cultivation of tobacco stem explants and Agrobacteria. On the phytohormone free media, shoot was rarely formed from transformed callus. However, these shoot were teratoma shoots which were not grown as normal shoot, and teratoma shoot from transformant by C23-1 was smaller than that of K29-1.

• 제어로봇시스템학회논문지
• /
• 제18권4호
• /
• pp.328-336
• /
• 2012

In this paper, we propose a robust fingertip extraction and extended Continuously Adaptive Mean Shift (CAMSHIFT) based robust hand gesture recognition for natural human-like HRI (Human-Robot Interaction). Firstly, for efficient and rapid hand detection, the hand candidate regions are segmented by the combination with robust $YC_bC_r$ skin color model and haar-like features based adaboost. Using the extracted hand candidate regions, we estimate the palm region and fingertip position from distance transformation based voting and geometrical feature of hands. From the hand orientation and palm center position, we find the optimal fingertip position and its orientation. Then using extended CAMSHIFT, we reliably track the 2D hand gesture trajectory with extracted fingertip. Finally, we applied the conditional density propagation (CONDENSATION) to recognize the pre-defined temporal motion trajectories. Experimental results show that the proposed algorithm not only rapidly extracts the hand region with accurately extracted fingertip and its angle but also robustly tracks the hand under different illumination, size and rotation conditions. Using these results, we successfully recognize the multiple hand gestures.

• 한국세라믹학회지
• /
• 제30권6호
• /
• pp.449-456
• /
• 1993

Sintering behaviour of zirconia powders prepared by different processing treatment was discussed. About >99% densities of theoretical were obtaiend on sintering at 140$0^{\circ}C$ for 2h in case of 300MPa uniaxially cold-pressed compact. But the lower densities were obtained on sintering above this temperature due to abnormal grain growth enabling the tetragonal to monoclinic phase transformation during cooling resulted in microcracks. All kinds of different dried powders exhibited nearly the same shrinkage behaviour with end-point shrinkage between 19 and 20%, and had maximum shrinkage rate (0.99~1.27%/min) around 120$0^{\circ}C$. During whole sintering process densification was mainly governed by grain growth and rearrangement of agglomerates. Heterogeneous abnormal grain growth and abrupt decrease in shrinkage were observed when continuous interagglomerate pore collapsed into isolated pores.