• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.330-335
• /
• 2013

This paper performs two kinds of Field-Oriented Control (FOC) for dual three phase permanent magnet synchronous motor (DTP-PMSM).The first is based on vector space decomposition to study the effect of current harmonics on electromechanical energy conversion. And the second presents the coupling relations between two sets of windings using two d-q transformation. And then this paper has deeply studied the differences between these two strategies, the different effect on the control of harmonic current and the reason for these differences. MATLAB-based Simulation studies of a 3KW DTP-PMSM are carried out to verify the analysis of differences between the two FOC strategies.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.1
• /
• pp.24-31
• /
• 1995

Heat flow equation and FEM have been used to calculate the hardening section of material in laser transformation hardening. SCM440 used as the diesel engine piston of vessel has been hardened by a $CO_2$ laser with the wavelength of $10.6{\mu}m$. The specimens were inclined from 0 to 70 degree to investigate the characteristics of laser hardening. The geometrical factor of heat flow equation affects the size of hardening area. The case width decreased with increasing travel speed and the case width increased with increasing inclined angle. Maximum case depth was achieved about 1.0mm and maximum hardness of laser hardened area was of 2.8 times than that of base metal. Experimental data show good agreement with the theoretical calculations for given laser hardening conditions.

• Journal of Institute of Convergence Technology
• /
• v.7 no.2
• /
• pp.21-23
• /
• 2017

Smart Factories could be regarded as a result of the integration of various key technologies of the fourth industrial revolutions. In smart factory, the IoT (Internet of things) is applied to capture the data generated by the production facility, store and analyze data generated in real time using Big Data technology. In addition, 3D printers are used to print expensive and complex parts, industrial robots supply materials and parts to the production site, store finished products in warehouses. In this paper, we introduced the definition of smart factory and change of job market. Also, we summarize several national policies to support enhancing transformation process of smart factory.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.205-210
• /
• 2008

The transformation of the liquid crystal complex made by binding of anionic surfactant, sodium dodecyl sulfate (SDS), into high charge density cationic polymer, the homopolymer of diallyldimethylammonium chloride (PDADMAC) was induced by adding of nonionic surfactants and investigated by means of microscopy and FE.SEM. Among nonionic surfactants in this experiments polyethylene glycol (3 mol) ether of lauryl alcohol (laureth-3) made variation in the complex. The laureth-3 transformed the complex into spherulite vesicle with the size of ca.$100{\mu}m$. This change increased the viscosity and the turbidity of the solution phase separated originally. Microscope showed that they are spherulite particles and polarized microscope suggested they are multi.lamellar liquid crystals. FE-SEM also proved that explicitly.

• International Journal of Korean Welding Society
• /
• v.2 no.2
• /
• pp.47-50
• /
• 2002

Because of the environmental problems, automotive companies are trying to reduce the weight of car body. Therefore, TRIP(TRansformation Induced Plasticity) steels, which have high strength and ductility have been developed. Welding process is a complex process; therefore deciding the optimal welding conditions on the basis of experimental data is an effective method. However, trial-and-error method to decide the optimal conditions requires too many experiments. To overcome these problems, response surface methodology was used. Response surface methodology is a collection of mathematical and statistical techniques that are used in the modeling and analysis of problems in which a response of interest is influenced by several variables and the objective is to optimize this response. This method was applied to the resistance spot welding process of the TRIP steel to optimize the welding parameters.

• Journal of Plant Biotechnology
• /
• v.31 no.1
• /
• pp.13-17
• /
• 2004

To improve transformation efficiency, the callus of Lilium lancifolium Thunb. were bombarded by particles coated with pIG 121 Hm which include NPT II and GUS genes, and then cocultivated with Agrobacterium tumefaciens EHA101 which contain pIG121Hm binary vector, carrying neomycin phosphotransferase (NPT II) and $\beta$-Glucuronidase (GUS) genes. Three days after cocultivation with Agrobacterium tumefaciens and particle bombardment, the callus clusters were transferred to MS medium containing 1mg/L 2,4-D, 0.1mg/L BAP, 100mg/L kanamycin and 200mg/L carbenicillin. Four weeks after transfer to the selection medium, GUS expression was detected and PCR analysis revealed the presence of NPT II fragment of the expected size (700 bp) in the transformed callus. The GUS expression from Agrobacterium-mediated transformants after particle bombardment increased to over 3-folds compared with that of callus cocultivated with Agrobacterium tumefaciens without particle bombardment. The callus clusters containing kanamycin resistant gene were transferred to MS medium containing 1mg/L NAA and 1mg/L BAP. Somatic embryos were developed in four weeks and microbulbs expressing GUS were formed.

• Journal of Plant Biotechnology
• /
• v.31 no.3
• /
• pp.185-190
• /
• 2004

We established a transient gene expression system in chili pepper leaves based on Agrobacterium-mediated transformation of GUS gene. For the best GUS transient expression, two step culture system was adopted. When the Agrobacterium tumefaciens cell density of pre-culture was $A_{600nm}$ 0.3, the cells were harvested and diluted to $A_{600nm}$ 0.8 with virulence induction medium after cell harvested. The addition of acetosyringone (200 $\mu$M) in virulence induction step was a key factor for successful transient expression. Additionally, Younger leaves showed more effective transient expression than older leaves. Temporally, the strongest intensity of GUS expression was detected at 2 days after infiltration. These results demonstrate that Agrobacterium-mediated transient expression can be used for a simple in vivo assays of plant promoters, transcription factors and furthermore provide efficient protocol for chili pepper transformation.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.658-663
• /
• 2003

A process of 3-D stereo particle image velocimetry(PIV)was developed for the measurement of an illuminated sliced section field of 3-D complex flows. The present method includes modeling of camera by a calibrator based on the homogeneous coordinate system, transformation of the oblique-angled image to the right-angled image, identification of 2-D velocity vectors by 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criteria, and finally 3-D display as the post processing. An experimental system was also used for the application of the proposed method. Two high speed digital CCD cameras and an Argon-Ion Laser for the illumination were adopted to clarify the time-dependent characteristics of the leading edge extension(LEX) in a highly swept shape applied to a delta wing found in modern air-fighters.

• Journal of Plant Biotechnology
• /
• v.31 no.4
• /
• pp.267-271
• /
• 2004

Transformed sweetpotato (Ipomoea batatas (L.) Lam. cv. Yulmi) plants were developed from embryogenic calli following Agrobacterium tumefaciens-mediated transformation. A. tumefaciens strain EHA105/pCAMBIA2301 harboring genes for intron $\beta$-glucuronidase (GUS) and kanamycin resistance. Transient expression of GUS gene was found to be higher when embryogenic calli were co-cultivated with Agrobacterium for 2 days. The co-cultured embryogenic calli transferred to selective MS medium containing 1mg/L 2,4-D, 100mg/L kanamycin, and 400mg/L claforan. These embryogenic calli were subcultured to the same selection medium at 4 weeks interval. Kanamycin-resistant calli transferred to hormone-free MS medium with kanamycin gave rise to somatic embryos and then converted into plantlets in the same medium. Southern blot analysis confirmed that the GUS gene was inserted into the genome of the sweetpotato plants. A histochemical assay revealed that the GUS gene was preferentially expressed in the leaf, petiole, and vascular tissue and tip of root.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.3 s.58
• /
• pp.555-566
• /
• 1997

This study was carried out to evaluate the cytotoxicity of rock wool fibers(RWFs) such as cell division disturbance, chromosomal and DNA damage, and mutagenicity using cultured cells. RWFs were the man made mineral fibers. In order to find the correlation between the cytotoxicity of RWFs and the phagocytic capacity of cells, the phagocytic processes were observed using scanning electron microscope. Cell division disturbance by RWFs was evaluated by the formation of multinucleated giant cells. The chromosomal damage was evaluated by the micronucleus formation. For the evaluation of oxidative DNA damage, 8-hydroxy-2'-deoxyguanosine (8-OH-dG) formation was measured utilizing calf thymus DNA. Mutagenicity was determined by the point mutation of HGPRT and the effect of RWFs on cell transformation was also observed. 1. Compared with the results of chrysotile, RWFs were no or little effect on the cell growth according to the results done by the tests of cell proliferation inhibition and relative plating efficiency. 2. The frequency of multinucleated giant cell formation was increased by the treatment of RWFs and it was dose-dependent. However, the effect of RWFs was weaker than that of chrysotile. 3. The number of micronuclei formed in the RWFs treated cells was between those of cells treated with chrysotile and those of untreated cells. 4. The 2 fold increase in the formation of 8-OH-dG in calf thymus DNA was observed in the cells treated with RWFs in the presence of $H_2O_2$. On the other hand, chrysotile had no effect on the 8-OH-dG formation. 5. RWFs had no effect on the HGPRT point mutation and cell transformation. These results showed that RWFs could induce chromosomal damage, cell division disturbance and oxidative DNA damage in the RWFs treated cells.