• 제목/요약/키워드: 2-D data

검색결과 10,636건 처리시간 0.044초

호모그래피를 이용한 3D 모델링을 위한 데이터 정합에 관한 연구 (A Study on registration using homography for 3D modeling)

  • 김상훈
    • 디지털콘텐츠학회 논문지
    • /
    • 제15권4호
    • /
    • pp.521-526
    • /
    • 2014
  • 본 논문은 3차원 모델링을 위한 두 개의 3차원 데이터들을 정합하는데 있어서 효율적인 방법을 제안한다. 3차원 데이터들은 서로 임의의 각도에서 취득한 것으로 취득 장치의 위치 및 2차원 영상정보가 포함 되어있다. 이 정보들을 이용하여 보다 빠르고 정확한 정합을 이루는 방법을 제안한다. 2차원 영상정보를 이용하여 보다 쉽게 대응점들을 찾아내는 것으로 대응하는 4개의 점에 대한 체적을 이용하여 모형의 크기를 일치시킨다. 또한, 이 점들로부터 얻어낸 좌표축의 호모그라피(homography)를 추출해냄으로써 2개의 데이터에 대한 정합과정은 보다 빠르고 정확하게 이루어진다. 제안한 알고리즘의 장점은 2차원 영상정보를 이용하기 때문에 정합하는 데에 있어서 오류가 적고 반복하는 과정이 불필요하다. 또한, 취득된 2차원 영상정보를 정합하고, 이를 3차원 모형에 2차원 영상을 씌움으로써 정합은 완벽하게 이루어진다.

3차원 구조를 고려한 전기비저항 탐사자료 해석을 통한 국내 저수지 제체 안전성 분석 (Safety Analysis of Reservoir Dikes in South Korea through the Interpretation of the Electrical Resistivity Data Considering Three-dimensional Structure)

  • 송성호;용환호;이규상;조인기
    • 지구물리와물리탐사
    • /
    • 제22권3호
    • /
    • pp.160-167
    • /
    • 2019
  • 저수지 제체는 3차원 전기비저항 구조로 구성되어 있기 때문에, 전기비저항 격자구조에 담수호의 수위변화에 따른 제체 내부의 침윤선 변동과 함께 담수호의 전기전도도가 고려되지 않는 경우 전기비저항 역산 결과가 왜곡될 수 있다. 이 연구에서는 3차원 전기비저항 탐사 모델링을 통하여, 저수지의 3차원 비저항 구조와 저수지 수위의 변화에 따른 제체 내부의 비저항 변화를 해석하였다. 이 분석 결과에 근거하여 국내 283개소 저수지를 대상으로 3차원 모델링에 의한 2차원 이론자료와 현장 2차원 탐사자료에 대한 역산 결과를 비교하였다. 마지막으로 두 역산의 비가 50% 이상이 되는 저수지를 추가 정밀조사 대상 저수지로 선정하였다.

정렬과 평균 정규화를 이용한 2D ECG 신호 압축 방법 (2D ECG Compression Method Using Sorting and Mean Normalization)

  • 이규봉;주영복;한찬호;허경무;박길흠
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
    • /
    • pp.193-195
    • /
    • 2009
  • In this paper, we propose an effective compression method for electrocardiogram(ECG) signals. 1-D ECG signals are reconstructed to 2-D ECG data by period and complexity sorting schemes with image compression techniques to Increase inter and intra-beat correlation. The proposed method added block division and mean-period normalization techniques on top of conventional 2-D data ECG compression methods. JPEG 2000 is chosen for compression of 2-D ECG data. Standard MIT-BIH arrhythmia database is used for evaluation and experiment. The results show that the proposed method outperforms compared to the most recent literature especially in case of high compression rate.

  • PDF

PET 검사 시 Reconstructed data와 Re-sliced data의 표준섭취계수와 Metabolic Tumor Volume의 비교 평가 (Evaluation of Standardized Uptake Value and Metabolic Tumor Volume between Reconstructed data and Re-sliced data in PET Study)

  • 도용호;이홍재;김진의
    • 핵의학기술
    • /
    • 제20권2호
    • /
    • pp.3-8
    • /
    • 2016
  • PET 검사에서 SUV는 암의 원발 부위, 전이여부 파악 및 병기결정, 재발여부 판단에 도움을 주는 지표이다. 특히 항암, 방사선치료 후 효과 판정을 위한 검사 시 이전 검사와의 SUV 비교 평가가 중요시 된다. 그러나 핵의학과 에서 자체적으로 데이터를 저장하는 외장하드, mini PACS 등의 저장 장치는 데이터 손실의 가능성을 가지고 있다. 이에 본 연구에서는 workstation의 reconstructed data (R-D)와 병원 PACS로 전송한 R-D, re-sliced data (S-D) 사이의 SUV를 비교 평가하여 자체 저장장치의 데이터 손실 시 PACS로 전송한 데이터의 사용가능 여부를 확인 하고자 한다. Biograph Truepoint 40, mCT 40, mCT 64, mMR (Siemens, Germany)장비에서 2015년 1월부터 2월까지 $^{18}F-FDG$ PET 검사를 시행한 20명($60.5{\pm}8.3$세)의 데이터를 분석하였다. Workstation의 R-D와 PACS의 R-D, S-D 데이터를 Syngo.via 프로그램으로 전송하여 liver, aorta, tumor 부위의 max SUV($SUV_{max}$), peak SUV ($SUV_{peak}$)와 tumor의 metabolic tumor volume (MTV)를 측정하였다. Workstation과 PACS의 R-D에서 liver, aorta, tumor의 평균 $SUV_{max}$$2.95{\pm}0.59$, $2.35{\pm}0.61$, $10.36{\pm}6.15$ 이었고 $SUV_{peak}$$2.70{\pm}0.51$, $2.07{\pm}0.43$, $7.67{\pm}3.73$으로 동일하였으며 통계적으로 유의한 차이가 없었다(p>0.05). PACS의 S-D는 R-D대비 평균 $SUV_{max}$는 5.18%, 7.22%, 12.11%, $SUV_{peak}$는 2.61%, 3.63%, 10.07% 감소하였으며 통계적으로 유의한 차이가 있었다(p<0.05). R-D와 S-D에서 결과 값의 상관계수는 $SUV_{max}$에서 0.99, 0.96, 0.99이었고 $SUV_{peak}$에서 0.99, 0.99, 0.99로 모두 양의 상관관계가 있었다. Bland-Altman 분석에서 2표준편차는 $SUV_{max}$에서 0.125, 0.290, 1.864이었고 $SUV_{peak}$에서 0.053, 0.103, 0.826이었다. Tumor의 MTV는 workstation과 PACS의 R-D에서 모두 $14.21{\pm}12.72cm^3$로 동일하였다(p>0.05). PACS의 S-D에서는 R-D 대비 0.12% 감소하였으며 통계적으로 유의한 차이가 없었다(p>0.05). R-D와 S-D에서 상관계수는 0.99이었고 Bland-Altman 분석에서 2표준편차는 2.243이였다. 본 논문에서 PACS에 저장된 R-D의 경우 workstation의 R-D와 비교하여 $SUV_{max}$, $SUV_{peak}$, MTV 모두에서 동일한 값을 보였으나 S-D의 경우 상관관계는 높지만 MTV를 제외한 $SUV_{max}$, $SUV_{peak}$는 통계적으로 유의한 차이가 있었다. R-D를 안정성 있는 병원 PACS에 저장한다면 자체 저장장치의 데이터 손실 시 이전 PET 데이터와의 비교에서 신뢰성 있는 SUV 분석이 가능할 것이라 생각된다.

  • PDF

강우레이더의 3차원 가시화를 위한 데이터 변환 및 표출기법 (Data Transformation and Display Technique for 3D Visualization of Rainfall Radar)

  • 김형훈;박현철;최영철;김태수;정윤재
    • 한국멀티미디어학회논문지
    • /
    • 제20권2호
    • /
    • pp.352-362
    • /
    • 2017
  • This paper proposes an algorithm for automatically converting and displaying rainfall radar data on a 3D GIS platform. The weather information displayed like rainfall radar data is updated frequently and large-scale. Thus, in order to efficiently display the data, an algorithm to convert and output the data automatically, rather than manually, is required. In addition, since rainfall data is extracted from the space, the use of the display image fused with the 3D GIS data representing the space enhances the visibility of the user. To meet these requirements, this study developed the Auto Data Converter application that analyzes the raw data of the rainfall radar and convert them into a universal format. In addition, Unity 3D, which has good development accessibility, was used for dynamic 3D implementation of the converted rainfall radar data. The software applications developed in this study could automatically convert a large volume of rainfall data into a universal format in a short time and perform 3D modeling effectively according to the data conversion on the 3D platform. Furthermore, the rainfall radar data could be merged with other GIS data for effective visualization.

Neutronics analysis of TRIGA Mark II research reactor

  • Rehman, Haseebur;Ahmad, Siraj-ul-Islam
    • Nuclear Engineering and Technology
    • /
    • 제50권1호
    • /
    • pp.35-42
    • /
    • 2018
  • This article presents clean core criticality calculations and control rod worth calculations for TRIGA (Training, Research, Isotope production-General Atomics) Mark II research reactor benchmark cores using Winfrith Improved Multi-group Scheme-D/4 (WIMS-D/4) and Program for Reactor In-core Analysis using Diffusion Equation (PRIDE) codes. Cores 133 and 134 were analyzed in 2-D (r, ${\theta}$) and 3-D (r, ${\theta}$, z), using WIMS-D/4 and PRIDE codes. Moreover, the influence of cross-section data was also studied using various libraries based on Evaluated Nuclear Data File (ENDF/B-VI.8 and VII.0), Joint Evaluated Fission and Fusion File (JEFF-3.1), Japanese Evaluated Nuclear Data Library (JENDL-3.2), and Joint Evaluated File (JEF-2.2) nuclear data. The simulation results showed that the multiplication factor calculated for all these data libraries is within 1% of the experimental results. The reactivity worth of the control rods of core 134 was also calculated with different homogenization approaches. A comparison was made with experimental and reported Monte Carlo results, and it was found that, using proper homogenization of absorber regions and surrounding fuel regions, the results obtained with PRIDE code are significantly improved.

Extracting Frequency-Frequency Correlation Function from Two-Dimensional Infrared Spectroscopy: Peak Shift Measurement

  • Kwak, Kyung-Won
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권10호
    • /
    • pp.3391-3396
    • /
    • 2012
  • Two-dimensional infrared (2D-IR) spectroscopy can probe the fast structural evolution of molecules under thermal equilibrium. Vibrational frequency fluctuation caused by structural evolution produced the time-dependent line shape change in 2D-IR spectrum. A variety of methods has been used to connect the evolution of 2D-IR spectrum with Frequency-Frequency Correlation Function (FFCF), which connects the experimental observables to a molecular level description. Here, a new method to extract FFCF from 2D-IR spectra is described. The experimental observable is the time-dependent frequency shift of maximum peak position in the slice spectrum of 2D-IR, which is taken along the excitation frequency axis. The direct relation between the 2D-IR peak shift and FFCF is proved analytically. Observing the 2D-IR peak shift does not need the full 2D-IR spectrum which covers 0-1 and 1-2 bands. Thus data collection time to determine FFCF can be reduced significantly, which helps the detection of transient species.

Development of Color 3D Scanner Using Laser Structured-light Imaging Method

  • Ko, Youngjun;Yi, Sooyeong
    • Current Optics and Photonics
    • /
    • 제2권6호
    • /
    • pp.554-562
    • /
    • 2018
  • This study presents a color 3D scanner based on the laser structured-light imaging method that can simultaneously acquire 3D shape data and color of a target object using a single camera. The 3D data acquisition of the scanner is based on the structured-light imaging method, and the color data is obtained from a natural color image. Because both the laser image and the color image are acquired by the same camera, it is efficient to obtain the 3D data and the color data of a pixel by avoiding the complicated correspondence algorithm. In addition to the 3D data, the color data is helpful for enhancing the realism of an object model. The proposed scanner consists of two line lasers, a color camera, and a rotation table. The line lasers are deployed at either side of the camera to eliminate shadow areas of a target object. This study addresses the calibration methods for the parameters of the camera, the plane equations covered by the line lasers, and the center of the rotation table. Experimental results demonstrate the performance in terms of accurate color and 3D data acquisition in this study.

3차원 복원을 위한 구조적 조명 보정방법 (Hard calibration of a structured light for the Euclidian reconstruction)

  • 신동조;양성우;김재희
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
    • /
    • pp.183-186
    • /
    • 2003
  • A vision sensor should be calibrated prior to infer a Euclidian shape reconstruction. A point to point calibration. also referred to as a hard calibration, estimates calibration parameters by means of a set of 3D to 2D point pairs. We proposed a new method for determining a set of 3D to 2D pairs for the structured light hard calibration. It is simply determined based on epipolar geometry between camera image plane and projector plane, and a projector calibrating grid pattern. The projector calibration is divided two stages; world 3D data acquisition Stage and corresponding 2D data acquisition stage. After 3D data points are derived using cross ratio, corresponding 2D point in the projector plane can be determined by the fundamental matrix and horizontal grid ID of a projector calibrating pattern. Euclidian reconstruction can be achieved by linear triangulation. and experimental results from simulation are presented.

  • PDF

선체구조 특징형상 정의에 의한 2D 도면에서 3D STEP 선체 모델의 생성 (Generation of 3D STEP Model from 2D Drawings Using Feature Definition of Ship Structure)

  • 황호진;한순흥;김용대
    • 한국CDE학회논문집
    • /
    • 제8권2호
    • /
    • pp.122-132
    • /
    • 2003
  • STEP AP218 has a standard schema to represent the structural model of a midship section. While it helps to exchange ship structural models among heterogeneous automation systems, most shipyards and classification societies still exchange information using 2D paper drawings. We propose a feature parameter input method to generate a 3D STEP model of a ship structure from 2D drawings. We have analyzed the ship structure information contained in 2D drawings and have defined a data model to express the contents of the drawing. We also developed a QUI for the feature parameter input. To translate 2D information extracted from the drawing into a STEP AP2l8 model, we have developed a shape generation library, and generated the 3D ship model through this library. The generated 3D STEP model of a ship structure can be used to exchange information between design departments in a shipyard as well as between classification societies and shipyards.