• Journal of Information Technology Applications and Management
• /
• v.24 no.2
• /
• pp.97-112
• /
• 2017

This paper aims to research the technology level of sports industry, through analyzing the technology gap between Korea and other major countries (USA, Europe, Japan, and China), and provide a list of technologies to be prioritized for R&D investment by conducting an analysis of the strategic importance of various element technologies. The results of the analysis showed that the technology level of Korean sports industry currently stands at 70.5% of the country with the most advanced technology (the USA), and that the technology gap amounts to 4.8 years. It was also found that the USA is the country with the most advanced technology (100%) at present, followed by Europe (91.1%), Japan (88.3%), Korea (70.5%), and China (61.2%). To reduce the technology gap, we established a Strategic Zone (SZ) and derived three element technologies including 'design and production technologies for sports and game equipment' in the $1^{st}$ tier, nine element technologies including '3D motion analysis and simulation technology' in the $2^{nd}$ tier, and four element technologies including 'fitness/health promotion and management technology' in the $3^{rd}$ tier. The significance of this research is that it included five major technology categories of the sports industry in its analysis, selected an expert on sports industry technologies using the delphi method. Therefore, the results of this study may be suitable for use as basic data in establishing the R&D strategy for the future development of the sports industry.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.1
• /
• pp.67-76
• /
• 2007

Flat DMT penetration was analyzed using a finite element model based on a large strain formulation. The ABAQUS/Explicit, a commercial finite element method, was used to study the flat DMT penetration in soils. Then, because the very large mesh distortion occurred due to the penetration of flat DMT, the adaptive meshing technique was utilized to maintain a high quality mesh configuration. The undrained shear strength obtained from the flat DMT is estimated using only the horizontal stress index ($K_{D}$) and so it became necessary to examine using the analysis results obtained from the penetration of the flat DMT. Analysis results show that in normally consolidated region of $K_{D}=2$, the results obtained from the correlations proposed by Marchetti show good agreement with those estimated from the finite element method. The present analysis also shows that in overconsolidated region of $K_{D}>2$, the results obtained from the relationships proposed by Kamei and Iwasaki show good agreement with those provided by the penetration analysis.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.371-376
• /
• 2002

A biosurfactant-producing bacterial strain was selected from diesel-contaminated soil by measuring the oil-film collapsing activity and identified as Pseudomonas aeruginosa D2D2. When glucose and olive oil were used as carbon sources, 11.46 g/1 of biosurfactant was obtained. Based on TLC analysis, the biosurfactant produced from P. aeruginosa D2D2 was identified as a glycolipid, consisting of two types of biosurfactants (Type I and Type II). The purified glycolipid reduced the surface tension of the culture from 72 dyne/cm to 27 dyne/cm. The hydrophilic and hydrophobic moiety of the biosurfactant were rhamnose and ${\beta}$-hydroxydecanoic acid, as determined by FAB-MS and NMR analyses, respectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.6
• /
• pp.653-666
• /
• 2012

This study made progress about Demage Mechanism of Transition Section in Cut and Cover Tunnel. For this study, Inspection and test was carried out about Transition Section. After this process, Numerical Analysis was accomplished by 2D, 3D. A result of inspection and test, It couldn't find the reason why the upper slab Demage was detected. So 2D Numerical Analysis was conducted. It was analyzed that the Safety Factor(1.0) was satisfied in 2D. But, the result of 3D Numerical Analysis, The reason was found that the Demage on upper slab was caused by moment change. The Moment was changed by column interval transition. For Retrofitting, Column was added under slab in tunnel. It was found that the addition column decreased upper slab deformation. After this study, It could be find that are important 3D Numerical Analysis as well as 2D Numerical Analysis in case of Transition Section. This Study can help developing construction and maintenance about Tunnel. Finally, It's going to study Retrofitting plans which have minimum influence of Transition Section in Cut and Cover Tunnel.

• Journal of Information Science Theory and Practice
• /
• v.10 no.spc
• /
• pp.112-122
• /
• 2022

Food security and its sovereignty have become among the most important key issues due to changes in the international situation. Regarding these issues, many countries now give attention to smart agriculture, which would increase production efficiency through a data-based system. The Korean government also has attempted to promote smart agriculture by 1) implementing the agri-food ICT (information and communications technology) policy, and 2) increasing the R&D budget by more than double in recent years. However, its endeavors only centered on large-scale farms which a number of domestic farmers rarely utilized in their farming. To promote smart agriculture more effectively, we diagnosed the government R&D trends of smart agriculture based on NTIS (National Science and Technology Information Service) data. We identified the research trends for each R&D period by analyzing three pieces of information: the regional information, research actor, and topic. Based on these findings, we could suggest systematic R&D directions and implications.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.825-830
• /
• 2004

A numerical analysis based on two-dimensional and three-dimensional incompressible Navier-Stokes equations has been carried out for double-circular-arc (DCA) compressor cascades. Two types of double-circular-arc cascades were used in this analysis. The appropriate turbulence model for compressor analysis was selected among the conventional turbulence models such as Baldwin-Lomax, k-$\varepsilon$ and k-$\varepsilon$ models. The results of current study were compared with available experimental data at various incidence angles. The 2-D and 3-D computational codes based on SIMPLE/PWIM algorithm for collocated grid and hybrid scheme for the convective terms were the main features of numerical tools. As commonly known, turbulence modeling is very important for the prediction of cascade flows, which are extremely complex with separation and reattachment by adverse pressure gradient. For selection of turbulence model, 2-D analysis was performed. And then, k-$\varepsilon$ turbulence model with wall function chosen as the reasonable turbulence model for 3-D calculation was used to increase the efficiency of computation times. A reasonable result of 3-D flow pattern passing through the double-circular-arc cascade was obtained.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.89-96
• /
• 2021

In this study, a mini hydro cyclone was designed and manufactured to achieve an inlet flow rate of 2 L/min in the experiment, which was conducted using alumina powder with a specific gravity of 3.97. This hydro cyclone was studied for using in steam and water analysis system (SWAS) of thermal power plant and was manufactured by 3D printing. Numerical analysis was performed with Solidworks Flow Simulation, utilizing the reynolds stress method (RSM) of fluid multiphase flow analysis models. Experimental and numerical analysis were performed under the three conditions of inlet velocity 2.0, 4.0, and 6.0 m/s. The separation efficiency was over 80% at all inlet velocity conditions. At the inlet velocity 4m/s, the separation efficiency was the best, and it was confirmed that the efficiency was more than 90%.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.106-112
• /
• 2020

Analyzing vitamin D levels is important for monitoring health conditions because vitamin D deficiency is associated with various diseases such as rickets, osteomalacia, cardiovascular disorders and some cancers. However, vitamin D concentration in the blood is very low with optimal level of 75 nmol/L, making quantitative analysis difficult. The objective of this study was to develop a highly sensitive analysis method for vitamin D using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-MS). 25-hydroxyvitamin D (25(OH)D), which has been used as an indicator of vitamin D metabolites in human biofluids was chemically derivatized using a secosteroid signal enhancing tag (SecoSET) with powerful dienophile and permanent positive charge. The SecoSET-derivatized 25(OH)D provided good linearity (R² > 0.99) and sensitivity (limit of quantitation: 11.3 fmol). Chemical derivatization of deuterated 25-hydroxyvitamin D₃ (d₆-25(OH)D3) with SecoSET enabled absolute quantitative analysis using MALDI-MS. The highly sensitive method could be successfully applied into monitoring of quantitative changes of bioactive vitamin D metabolites after treatment with ketoconazole to inhibit 1α-hydroxylase reaction related to vitamin D metabolism in human breast cancer cells. Taken together, we developed a MALDI-MS-based platform that could quantitatively analyze vitamin D metabolites from cell products, blood and other biofluids. This platform may be applied to monitor various diseases associated with vitamin D deficiency such as rickets, osteomalacia and breast cancer.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.1
• /
• pp.176-198
• /
• 2013

Preliminary feasibility study(PFS) was introduced in 1999 by financial authority to encourage a cautious approach to new large-scale public investment project. As it applied cost-benefit analysis as prime measure for decision-making, various issues have been arisen concerning feasibility analysis on R&D programs. This work is intended to suggest standard approaches to be established in PFS on R&D program as follows: 1. The issue questions can be induced in a standard way by 15 representative questions and their correlation with evaluation criteria. 2. The analyzing strategy can be standardized by establishing standards for classification of R&D effects and R&D logic analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.8
• /
• pp.51-57
• /
• 2018

In this paper, we investigate the impact of channel estimation error on the D2D power control algorithm. In the previous work, D2D power control algorithm has been proposed under the assumption that the channel between the transmitter and the corresponding receiver is perfectly estimated. In reality, the channel estimation error is more often the case. The first question is that the power control algorithm designed for perfect channel estimation is still valid under the channel estimation error environment ? The second question is, if it is not valid, what could be the possible remedy for the channel estimation error ? In this paper, to answer the first question, we investigate the impact of the channel estimation error on the power control algorithm. We first review the D2D power control algorithm designed for perfect channel estimation. Then, we model the channel estimation error. Finally, we summarize the main results observed from the analysis of the simulation.