• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.3
• /
• pp.34-39
• /
• 2008

The purpose of this paper is characteristic analysis of multi-disk axial-gap pm motor for turbo compressor. The axial-gap permanent magnet motor has shown a growing interest in high-speed application for its high-efficiency, compact size and low vibration characteristics due to core-less structure. To achieve high-power, the axial-gap PM motor has multi-disk structure of stator and rotor disk. Because of its complicated magnetic flux path, it is not easy to calculate a dynamic characteristics using finite element analysis. In this paper, the simplified 2-D unfolded model to predict EMF characteristic is presented. To verify thesuggested 2-D unfolded model analysis of back-EMF characteristic was calculated and compared 3-D finite element. Finally the proposed method is verified by experimental results and shows good agreement with test results.

• 전기의세계
• /
• v.21 no.2
• /
• pp.9-19
• /
• 1972

The transient characteristics of separately excited d-c motor driven by thyristor d-c chopper is studied in this paper. The armature controlled system is applied. As a result of theoretrical analysis the following conculsions were drawn: (1) For the transient analysis, it is recognized that the state transition analysis is a more general method and powerful tool than the state equation method or signal flow graph method, although it includes iterative matrix calculations. And the system is dealt with a finite width sampled-data system in the state transition analysis. (2) The transient characteristics of the motor angular velocity and its torque to the sampling duration variation are compared with those due to the amplitude variation of d-c chopper voltage as follows. The attenuation rate of the transient characteristics is equal in both cases, but the initial value of the transient characteristics in former case is greater than in latter case. (3) The roots of characteristics equation of the system lie inside the unit circle of the Z-plane. Therefor the system is stable. Further it is found that as the sampling duration is decreased the relative stability is lessened.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.289-296
• /
• 2000

This paper presents a method of seismic analysis for a 2-D fluid-structure-soil interaction systems. With this method, the fluid can be modeled by spurious free 4-node displacement-based fluid elements which use rotational penalty and mass projection technique in conjunction with the one point reduced integration scheme to remove the spurious zero energy modes. The structure and the near-field soil are discretized by the standard 2-D finite elements, while the unbounded far-field soil is represented by the dynamic infinite elements in the frequency domain. Since this method directly models the fluid-structure-soil interaction systems, it can be applied to the dynamic analysis of a 2-D liquid storage structure with complex geometry. Finally, results of seismic analyses are presented for a spent fuel storage tank embedded in a layered half-space and a massive concrete dam on a layered half-space.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.55-62
• /
• 2013

Automatic inspection system is required for increment of copper plate production and demand expansion. Thus 3D surface form and defect detection of copper plate calls for 3D image and GUI analysis. Limitation of 2D analysis, such as error occurrence and decision difficulty makes eye inspection automatic. Automatic inspection is able to raise accurate inspection rate and productivity efficiency elevation. In this paper defect classification is defined and inspection system is implemented. Defect analysis algorithms and GUI for 3D image analysis is developed and tested.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2433-2442
• /
• 2011

The three dimensional quantitative structure activity relationship (3D QSAR) models were developed using Comparative molecular field analysis (CoMFA), comparative molecular similarity indices analysis (CoMSIA) and docking studies. The fit of Quinazolinone antifolates inside the active site of modeled bovine dihydrofolate reductase (DHFR) was assessed. Both ligand based (LB) and receptor based (RB) QSAR models were generated, these models showed good internal and external statistical reliability that is evident from the $q^2_{loo}$, $r^2_{ncv}$ and $r^2_{pred}$. The identified key features enabled us to design new Quinazolinone analogues as DHFR inhibitors. This study is a building bridge between docking studies of homology modeled bovine DHFR protein as well as ligand and target based 3D QSAR techniques of CoMFA and CoMSIA approaches.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.98-108
• /
• 1998

Hull design data is currently prepared by a 2D CAD system and re-input to 3D CAD systems specialized for detail design or to a structural analysis system. In this paper, sharing design data among different CAD systems has been studied. Based on STEP methodology, a neutral model is generated from 2D AutoCAD drawings. To handle a geometric data of this model, the non-manifold model of ACIS is used because it can support various CAD data representation such as 2D graphic entities, 3D wireframe, 3D surface model, and solid B-Rep/CSG model. It is observed that a mon-manifold model can easily be transformed to a 3-D wireframe model for the hull detail design system AutoDef or a FE model for the structural analysis system Nastran.

• Asia Pacific Journal of Business Review
• /
• v.1 no.2
• /
• pp.37-62
• /
• 2017

To analyze the effects of R&D expenditure on the firm value of Korean firms, we classified portfolios based on R&D activity levels. After that, we conducted a time-series analysis to assess excess returns from the portfolios. To carry out such an analysis, an empirical analysis of excess returns in the capital market was performed by using the monthly earning rate of stocks from 2000 to 2013. The purpose of this research is to provide basic data on investment to stakeholders in the capital market by analyzing the effects of R&D on the firm value and to overcome scholarly limitations by offering a new model of analysis. The criteria for classifying the portfolios were based on R&D expenditure levels. The analysis models follow the Fama-French Three-Factor Model and the Carhart Four-Factor Model. The analyses results are as follows. Extrapolating monthly profit rates based on R&D expenditure levels, portfolios with low R&D expenditures showed higher earning rates than those with high R&D expenditures. This suggests that high R&D expenditures did not translate into high earning rates. The investor depreciates the R&D expenditures related profitability and the possibility of success in the market, leading to falls in stock prices and a failure to give a positive effect on the firm value. Our research differs from the previous investigations as we carried out an empirical analysis based on the actual investors' attitudes about R&D expenditures and how these can generate excess earnings. Our research results show that the data related to R&D expenditure are not reflected fully in the market.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.17-23
• /
• 2007

This paper, describes the VDR physical layer design in VDL Mode-2 in order to meet the requirements of International standards. VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. The analysis of the isolated channel from near channels, sensitivity of the receiver, dynamic range of the receiver, linear of the transmitter and energy of spurious for linear and non-linear simulation as a requirement condition of performance of VDR and teaches the course of design. The transmitting power level should be lower than 5dB from Po1dB point and the selected IF frequency is 45MHz to suppress the spurious signals. The receiver designed has 4.5dB of Noise figure, 27.52dB of Es/No, Mixer isolation up to 30dB, IIP3 power of LNA up to +10dBm to minimize the intermodulation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.784-791
• /
• 2008

In this study, we recognized about application of the load distribution factor for design of tunnel in 3D numerical analysis. Generally, load distribution factor of tunnel is applied to describe 3D arching effect that can not describe when 2D numerical analysis. Through result of 3D numerical analysis, we used to apply in numerical analysis for the load distribution factor that ratio of finally displacement to displacement of construction step. But 3D numerical analysis need to apply to load distribution factor for convenience of numerical analysis. Therefore, we proposed load distribution factor that reduce time and coast. It corrected variable of advanced length in load distribution factor of 3D numerical analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.5-12
• /
• 2008

There are some ways to improve precision of conventional munitions by low-cost method. 2D Course Correction Munition(CCM) is one of those ways, which is a 155mm projectile integrated with 2D Guidance Fuze(GF) instead of conventional fuze. 2D GF can correct the projectile trajectory and minimize range and deflection errors from its aimpoint using canard control. In this paper 2D CCM system concept is introduced and its course correction capability is analyzed using PRODAS.