• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.6
• /
• pp.286-295
• /
• 2006

This paper presents a design of a real-time software GPS receiver which runs on a PC. The software GPS receiver has advantages over conventional hardware based receivers in terms of flexibility and efficiency in application oriented system design and modification. In odor to reduce the processing time of the software operations in the receiver, a shared memory structure is used with a dynamic data control, and the byte-type IF data is processed through an Open Multi-Processing technique in the mixer and integrator which requires the most computational load. A high speed data acquisition device is used to capture the incoming high-rate IF signals. The FFT-IFFT correlation technique is used for initial acquisition and FLL assisted PLL is used for carrier tracking. All software modules are operated in sequence and are synchronized with pre-defined time scheduling. The performance of the designed software GPS receiver is evaluated by running it in real-time using the real GPS signals.

• Wind and Structures
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2024

In order to effectively simulate nonstationary stochastic turbulent wind fields, four separation hybrid (SEP-H) models are proposed in the present study. Based on the assumption that the lateral turbulence component at one single-point is uncorrelated with the longitudinal and vertical turbulence components, the fluctuating wind is separated into 2nV-1D and nV1D nonstationary stochastic vector processes. The first process can be expressed as double proper orthogonal decomposition (DPOD) or proper orthogonal decomposition and spectral representation method (POD-SRM), and the second process can be expressed as POD or SRM. On this basis, four SEP-H models of nonstationary stochastic turbulent wind fields are developed. In addition, the orthogonal random variables in the SEP-H models are presented as random orthogonal functions of elementary random variables. Meanwhile, the number theoretical method (NTM) is conveniently adopted to select representative points set of the elementary random variables. The POD-FFT (Fast Fourier transform) technique is introduced in frequency to give full play to the computational efficiency of the SEP-H models. Finally, taking a long-span bridge as the engineering background, the SEP-H models are compared with the dimension-reduction DPOD (DR-DPOD) model to verify the effectiveness and superiority of the proposed models.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.16-22
• /
• 2012

In this paper, the forensic marking algorithm is proposed using psychoacoustic model II and MDCT for high-quality audio. The proposed forensic marking method, that inserts the user fingerprinting code of the audio content into the selected sub-band, in which audio signal energy is lower than the spectrum masking level. In the range of the one frame which has 2,048 samples for FFT of original audio signal, the audio forensic marking is processed in 3 sub-bands. According to the average attack of the fingerprinting codes, one frame's SNR is measured on 100% trace ratio of the collusion codes. When the lower strength 0.1 of the inserted fingerprinting code, SNR is 38.44dB. And in case, the added strength 0.5 of white gaussian noise, SNR is 19.09dB. As a result, it confirms that the proposed audio forensic marking algorithm is maintained the marking robustness of the fingerprinting code and the audio high-quality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.759-767
• /
• 2020

This paper proposes a new Recurrent neural network (RNN) based spectrum sensing technique for cognitive radio communications. The proposed technique determines the existence of primary user's signal without any prior information of the primary users. The method performs high-speed sampling by considering the whole sensing bandwidth and then converts the signal into frequency spectrum via fast Fourier transform (FFT). This spectrum signal is cut in sensing channel bandwidth and entered into the RNN to determine the channel vacancy. The performance of the proposed technique is verified through computer simulations. According to the results, the proposed one is superior to more than 2 [dB] than the existing threshold-based technique and has similar performance to that of the existing Convolutional neural network (CNN) based method. In addition, experiments are carried out in indoor environments and the results show that the proposed technique performs more than 4 [dB] better than both the conventional threshold-based and the CNN based methods.

• Journal of Sensor Science and Technology
• /
• v.31 no.1
• /
• pp.51-56
• /
• 2022

In this study an efficient method for detecting and monitoring engine misfiring, focusing on minute speed changes in the crankshaft is proposed., Its validity is verified using various misfiring cases. Typically, the crankshaft speed fluctuates around the normal value depending on the engine misfiring status. Even a minute speed change in the crankshaft can be estimated by measuring the rotation time of each tooth of the 118-tooth flywheel attached to the crankshaft with a 2-MHz timer. Therefore, a speed pattern for an in-line six-cylinder engine consists of 236 tooth rotation speeds corresponding to the two rotations of the crankshaft, in which all the cylinders complete four-stroke cycle. FFT analysis can reduce the number of components of a speed pattern from 236 to just four major components: - fundamental frequency_(f), 2f, 3f, 6f., - This makes the comparison of the misfiring cases simpler and faster. In the experiment, five engine status cases (one normal firing and, four misfiring cases) were simulated. While the 6f component was the largest for the normal case, the f component increased as misfiring occurred one, two apart, and two consecutive times. The 3D FFT pattern comprising the ratio of f, 2f, and 3f, 6f showed that the distance between the misfiring and normal states was larger

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.671-673
• /
• 2000

본 논문에서는 분산공유메모리 다중프로세서 시스템에서 하드웨어 구성요소와 실행환경이 시스템의 전체 성능에 미치는 영향을 시뮬레이션을 통하여 분석한다. PARSEC[1,2]을 이용하여 분산공유메모리 다중프로세서 시스템을 실제 실행환경에 근접하게 모델링하고 그 모델링된 시스템상에 2D FFT를 가상 실행하는 방식의 시뮬레이션 결과, 일반적으로 성능분석을 할 때 성능요소로 고려하지 않는 군소 하드웨어 요소들이 시스템 구성에 따라 시스템의 전체 성능에 상당한 영향을 미침을 밝힌다. 또한 반복순환 구문의 오버헤드, 코드최적화 등 실행조건에 따른 성능의 변화도 정량적으로 분석한다.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.164-165
• /
• 1979

Two dimensional kernels which reconstruct the tomographic image from the blurred one formed by simple back-projection are investigated and their performances are compared. These kernels are derived from tile point spread function of the tomographic system and have the form of a ramp filter modified by several window functions to suppress ringing in the reconstruction. Computer simulation using a computer generated phantom image data with different correction functions(kernels) has been carried out. In this simulation, filtering in frequency domain by 2-D FFT technique or in space domain by 2-D direct convolution is considered. It is found that the-computation time required for real space convolution technique is much larger than that of Fourier 2-D filtering technique in the pratical situation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.567-569
• /
• 2023

GAN은 이미지 생성모델로서 이미지 공간에서 좋은 결과를 보여왔다. 우리는 이러한 GAN의 능력을 더욱 향상하기 위하여 본 연구에서 주파수 영역에서 이미지를 학습하고 생성하는 새로운 방법을 제안한다. 이를 위하여 먼저 학습데이터를 2D FFT로 주파수 영역으로 변환한 후 변환된 학습데이터를 GAN이 학습하게 한다. 학습 후에 GAN은 새로운 이미지를 생성하며 생성된 이미지를 2D IFFT하여 이미지 공간으로 변환한다. 이렇게 주파수 영역에서 이미지를 생성하는 방법은 이미지 공간에서 생성하는 방법보다 다양한 장점이 있다. 생성된 이미지의 품질을 평가하기 위하여 4개 데이터 셋에 4개의 평가지표를 사용하여 평가한 결과 주파수 영역에서 생성한 이미지가 IS, P&R, D&C 측면에서 더 좋은 것으로 평가되었다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.5 s.311
• /
• pp.48-56
• /
• 2006

In this paper, we proposed the high quality audio watermarking algorithm using MDCT/IMDCT (Modified DCT/Inverse Modified DCT) with psychoacoustic model. Generally, a digital audio watermark is embedding the frequency domain after frequency transform of the digital audio data but the digital audio quality is affected by watermarking. In our scheme, the digital audio data is spread with PN((Pseudo Noise) code and then audio watermark is embedded in MDCT processing that refers psychoacoustic model. In MDCT processing, according to the shape of filter bank output, the block switching selects a window sequence that has 256, 1,024 or 2,048 points interval for high quality audio. The author confirm that when watermark weight ${\alpha}$ is 2.5 below, the detection ratio of watermark is a satisfied to SDMI's(Secure Digital Music Initiative) recommendation 50% above and SM is $50{\sim}68dB$ range with mainly 4 kind of attacks(Compression, Cropping, FFT and Echo).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.83-92
• /
• 2005

An electromagnetic acoustic transducer (EMAT) is a unique probe that does not require a couplant or gel and also can usually generate or detect an ultrasonic wave into specimens across a small gap. It, therefore can be applied in a noncontact mode with a high degree of reproducibility. Especially stiffness of composites depends on layup sequence of CFRP(carbon fiber reinforced plastics) laminates. It is very important to evaluate the layup errors in prepreg laminates. A nondestructive technique can therefore serve as a useful measurement for detecting layup errors. This shear wave for detecting the presence of the errors is very sensitive. A decomposition model has been used in the interpretation and prediction of test results. Test results have been com pared with model data. It is found that the high probability shows between tests and the model utilized in characterizing cured layups of the laminates. Also a C-scan method was used for detecting layup of the laminates because of extracting fiber orientation information from the ultrasonic reflection caused by structural imperfections in the laminates. Therefore, it was found that interface C-scan images show the fiber orientation information by using two-dimensional fast Fourier transform (2-D FFT).